TURBOSOUND MILAN M10 Powered PA Loudspeaker

Turbosound Milan M10 10-Inch Two-Way Powered PA Loudspeaker

The Turbosound Milan M10 is a 600 W powered 10-inch two-way PA loudspeaker designed for portable sound systems, stage monitoring and permanent installations.

The M10 combines a high-excursion 10-inch low-frequency driver with a 1-inch high-frequency compression driver. Its elliptical waveguide controls sound dispersion and provides 90° horizontal by 60° vertical coverage.

The integrated 600 W Class-D amplification system operates together with Klark Teknik digital signal processing. Separate low- and high-frequency amplification, an active crossover, dynamic equalisation and limiting manage the loudspeaker across its operating frequency range.

Two independent input channels feature combination XLR / 6.3 mm connectors, selectable microphone or line-level sensitivity and individual level controls. The integrated two-band EQ adjusts bass and treble, while the Speech and Music modes optimise the frequency response for spoken-word or music applications. A balanced XLR Mix Out sends the combined input signal to another powered loudspeaker.

The switchable 100 Hz low-cut filter helps integrate the M10 with a subwoofer or configure it as a stage monitor. Its lightweight polypropylene enclosure includes recessed carrying handles, a dual-angle pole-mount socket and internal M10 rigging points for permanent installations.

Main Features

• Powered two-way 10-inch PA loudspeaker for portable systems, stage monitoring and permanent installations
• 600 W Class-D amplification provides separate power for the low- and high-frequency sections
• Klark Teknik DSP with active crossover, dynamic equalisation and limiting manages system performance
• High-excursion 10-inch low-frequency driver with a low-mass voice coil supports accurate transient reproduction
• 1-inch high-temperature compression driver extends high-frequency reproduction
• Elliptical waveguide provides 90° x 60° dispersion and controlled audience coverage
• Two independent mic/line inputs allow direct connection of different audio sources
• Individual input level controls help balance the volume of two connected sources
• Two-band master EQ provides bass and treble adjustment
• Speech and Music modes optimise the frequency response for voice or music applications
• Switchable 100 Hz low-cut filter supports subwoofer integration and stage monitor use
• Balanced XLR Mix Out sends the combined input signal to an additional powered loudspeaker
• Dual-angle pole-mount socket helps optimise loudspeaker positioning and audience coverage
• Six internal M10 rigging points support permanent installation

Technical Specifications

• Type: powered two-way full-range PA loudspeaker
• Low-frequency driver: 1 x 10-inch
• High-frequency driver: 1 x 1-inch compression driver
• Maximum output power: 600 W
• Low-frequency amplifier power: 500 W
• High-frequency amplifier power: 100 W
• Amplifier class: Class-D
• Signal processing: Klark Teknik DSP
• Frequency range (±3 dB): 55 Hz–18 kHz
• Frequency range (-10 dB): 50 Hz–20 kHz
• Dispersion: 90° horizontal x 60° vertical
• Maximum SPL: 126 dB peak
• Bass EQ: ±6 dB at 80 Hz
• Treble EQ: ±6 dB at 12 kHz
• Low-cut filter: switchable, 100 Hz
• Sound modes: Speech and Music
• Inputs: 2 x combination XLR / 6.3 mm mic/line inputs
• Output: 1 x balanced 3-pin XLR Mix Out
• Microphone input sensitivity: -32 dBu
• Line input sensitivity: -2 dBu
• Microphone input impedance: 560 Ω unbalanced, 1 kΩ balanced
• Line input impedance: 20 kΩ unbalanced, 40 kΩ balanced
• Controls: input level, mic/line selection, bass and treble EQ, low-cut filter, Speech/Music mode, front LED and mains power
• Indicators: power, signal, limit and input clip LEDs
• Amplifier protection: short circuit, open circuit and thermal protection
• European mains voltage: 220–240 V AC
• Fuse: T 3.15 A H 250 V
• Power consumption: 80 W at 1/8 maximum power
• Mains connector: IEC connector with integrated fuseholder
• Enclosure: injection-moulded polypropylene with recessed carrying handles
• Protective grille: powder-coated perforated steel with foam backing
• Pole-mount socket: 35 mm, dual-angle
• Rigging points: 6 x internal M10 threads
• Dimensions (H x W x D): 522 x 329 x 294 mm
• Net weight: 13.3 kg

In the Box

• Turbosound Milan M10 powered PA loudspeaker

Who Is It For

The Turbosound Milan M10 is designed for portable PA systems, music and speech reproduction, small live sound systems, stage monitoring and permanent sound installations. Its two mic/line inputs also allow it to be used in simple setups without a separate mixing console.

Can’t find the Turbosound product you are looking for?

Contact us: info@stageiq.lt or +370 636 55536.