Turbosound iX12 Two-Way Powered Loudspeaker

Turbosound iX12 Two-Way Powered Loudspeaker

The Turbosound iX12 is a 1,000 W two-way powered loudspeaker with KLARK TEKNIK DSP, Bluetooth audio streaming and remote control, designed for portable and fixed music and speech sound reinforcement systems.

The loudspeaker combines a 12-inch low-frequency driver with a low-mass voice coil and a 1-inch titanium-dome compression driver. Its nominal 80° horizontal by 60° vertical dispersion pattern helps direct sound across the intended audience area.

The 1,000 W amplification system uses a Class-D amplifier for the low-frequency driver and a Class-AB amplifier for the high-frequency driver. KLARK TEKNIK digital signal processing provides positioning, sound mode, phase, equalisation and high-pass crossover settings. Factory presets allow the loudspeaker response to be configured for stand-mounted operation or floor-monitor applications.

The integrated 3-channel digital mixer can be operated locally through the backlit LCD screen and rotary push encoder or controlled remotely from an iPhone or iPad. Bluetooth connectivity also supports wireless stereo audio streaming. When two compatible iX loudspeakers are used, master–slave pairing distributes the left and right channels to create a stereo system.

Two combination XLR / 6.3 mm input connectors accept microphone and line-level signals, while the balanced XLR output can route the signal to another powered loudspeaker or audio device. The lightweight polypropylene enclosure, perforated steel grille, carrying handles and dual-angle 35 mm pole socket support portable use and fixed sound reinforcement applications.

Main Features

• Two-way powered loudspeaker for portable and fixed sound reinforcement systems
• 1,000 W amplification system combines Class-D low-frequency and Class-AB high-frequency amplifiers
• 12-inch low-frequency driver with a low-mass voice coil supports improved transient response
• 1-inch titanium-dome compression driver extends high-frequency reproduction
• KLARK TEKNIK DSP provides positioning, sound mode, phase and frequency-response controls
• Integrated 3-channel digital mixer manages the analogue inputs and Bluetooth audio signal
• Backlit LCD screen and rotary push encoder provide direct access to system parameters
• Remote control from an iPhone or iPad allows settings to be adjusted from the stage or listening area
• Bluetooth stereo audio streaming enables wireless music playback without an additional signal cable
• Master–slave pairing allows two compatible iX loudspeakers to operate as a wireless stereo system
• Two combination XLR / 6.3 mm inputs accommodate microphone and line-level sources
• Balanced XLR output allows the signal to be routed to an additional powered loudspeaker
• Dual-angle 35 mm pole socket helps optimise the loudspeaker angle for audience coverage
• Lightweight polypropylene enclosure and carrying handles simplify transportation

Technical Specifications

• Product type: powered loudspeaker
• System: two-way
• Maximum output power: 1,000 W
• Low-frequency amplifier: Class-D
• High-frequency amplifier: Class-AB
• Frequency response: 50 Hz–20 kHz, ±3 dB
• Frequency range: 42 Hz–20 kHz, –10 dB
• Maximum SPL: 125 dB
• Nominal dispersion: 80° horizontal × 60° vertical at –6 dB
• Low-frequency driver: 1 × 12-inch (308.5 mm)
• High-frequency driver: 1 × 1-inch (25.4 mm) compression driver
• Crossover type: active
• Limiters: independent HF and LF
• Amplifier protection: short-circuit, open-circuit and thermal protection
• Digital mixer: 3-channel
• Audio inputs: 2 × combination XLR / 6.3 mm connectors
• Input sensitivity: +4 dBu with the volume control set to 0 dB
• Input impedance: 16 kΩ unbalanced, 33 kΩ balanced
• Maximum input level: +22 dBu
• Audio output: balanced XLR
• Output impedance: 220 Ω unbalanced, 600 Ω balanced
• DSP settings: positioning, sound mode and phase
• Equalisation: bass and treble controls
• High-pass crossover: Linkwitz-Riley, 24 dB/octave
• Display: 128 × 32 LCD with blue backlight
• Hardware control: rotary push encoder
• Settings protection: lock-out function for all parameters
• Remote control: iOS interface via Bluetooth
• Bluetooth version: Bluetooth 4.0 dual mode
• Bluetooth frequency range: 2402–2480 MHz
• Bluetooth channel count: 79
• Bluetooth output power: 8 dBm
• Bluetooth compatibility: A2DP 1.2 and BLE
• Maximum wireless range: 35 m without interference
• Stereo connectivity: master–slave loudspeaker pairing
• Mains connection: IEC connector with integrated power switch
• Power supply: 220–240 V~, 50/60 Hz
• Power consumption: 80 W at 1/8 maximum power
• Pole socket: dual-angle 35 mm
• Enclosure: injection-moulded polypropylene
• Finish: black
• Grille: powder-coated perforated steel
• Dimensions (H × W × D): 609 × 370 × 370 mm
• Net weight: 19.4 kg

In the Box

• Turbosound iX12 powered loudspeaker
• Mains power cable

Who Is It For

The Turbosound iX12 is designed for portable and fixed music and speech sound reinforcement systems. It is suitable for musicians, DJs, event sound engineers, presentations, and small to medium-sized venues requiring a powered loudspeaker with integrated DSP, a digital mixer, wireless audio streaming and remote control.

Can’t find the Turbosound product you are looking for?

Contact us: info@stageiq.lt or +370 636 55536.