Turbosound iQ10 2-Way 10-Inch Powered Loudspeaker

Turbosound iQ10 2-Way 10-Inch Powered Loudspeaker

The Turbosound iQ10 is a 2-way 10-inch powered loudspeaker designed for portable and fixed-installation music and speech sound reinforcement applications.

The system combines a 10-inch low-frequency driver with a low-mass voice coil and a high-temperature 1-inch compression driver. A two-channel Klark Teknik Class-D amplifier delivers up to 2,500 W of output power, while independent HF, LF, peak and RMS limiting helps protect the loudspeaker system.

Integrated Klark Teknik DSP provides dynamic EQ, loudspeaker modelling, Spatial Contour Control, subwoofer integration and Feedback Control. The rear-panel LCD interface gives direct access to processing parameters, while the built-in USB port enables computer-based remote control and firmware updates.

Two mic/line inputs with independent gain controls allow microphones and line-level sources to be connected directly. Separate linked outputs, a balanced Mix Out and ULTRANET digital audio networking support flexible integration with mixers, personal monitoring systems and other compatible equipment. The enclosure includes a dual-angle pole socket and three M10 rigging points for portable or installed use.

Main Features

• 2-way powered loudspeaker for portable and fixed sound reinforcement applications
• 10-inch low-frequency driver with a low-mass voice coil supports accurate transient reproduction
• High-temperature 1-inch compression driver extends high-frequency reproduction
• Klark Teknik Class-D amplification provides up to 2,500 W of output power
• Integrated Klark Teknik DSP provides system control, dynamic EQ and transparent limiting
• Speaker modelling presets reproduce the characteristics of selected loudspeaker systems
• Spatial Contour Control compensates the frequency response for stand, floor, wall or ceiling placement
• Two mic/line inputs with independent gain controls accommodate microphones and line-level sources
• ULTRANET networking carries multichannel digital audio over CAT5 cable
• USB connectivity enables computer-based remote control and firmware updates
• Dual-angle pole socket helps optimise coverage for different audience areas
• Three M10 rigging points support permanent installation applications

Technical Specifications

• System type: 2-way powered loudspeaker
• Low-frequency driver: 1 × 10-inch (256 mm)
• High-frequency driver: 1 × 1-inch (25.4 mm) compression driver
• Frequency response: 55 Hz – 18 kHz, ±3 dB
• Frequency range: 50 Hz – 20 kHz, -10 dB
• Nominal dispersion: 90° horizontal × 60° vertical at -6 dB
• Maximum SPL: 129 dB peak
• Crossover type: Active
• Limiter: Independent HF, LF, peak and RMS
• Maximum output power: 2,500 W
• Amplifier type: Class-D
• Amplifier protection: Short-circuit, open-circuit and thermal protection
• Analogue inputs: 2 × XLR/TRS combo
• Input sensitivity: Line +4 dBu; microphone -22 dBu, switchable
• Input impedance: 20 kΩ unbalanced; 40 kΩ balanced
• Maximum input level: +21 dBu
• Linked outputs: 2 × XLR
• Mix output: 1 × balanced XLR
• Output impedance: 100 Ω unbalanced; 200 Ω balanced
• ULTRANET connections: 2 × RJ45 input/link
• DSP controls: Rotary push encoder; PROCESS, SETUP, EXIT and ENTER buttons
• Mixer controls: 2 × gain controls and 2 × Line/Mic switches
• DSP functions: Positioning, Sound Mode, Speaker Modelling and FBQ
• Display: 128 × 32 pixel blue-backlit LCD
• Delay: 0–300 ms
• Equalisation: High- and low-shelving EQ; 2 × parametric EQ
• Presets: 20 total, including 19 user-definable presets
• High-pass filter: Linkwitz-Riley, 24 dB/octave
• Settings protection: Lock-out function
• Power connections: Neutrik powerCON input and link output
• Power consumption: 150 W at 1/8 maximum power
• Enclosure: Injection-moulded polypropylene
• Finish: Black painted
• Grille: Powder-coated perforated steel
• Mounting: Dual-angle pole socket and 3 × M10 rigging points
• Dimensions (H × W × D): 526 × 324 × 316 mm
• Net weight: 17.2 kg

In the Box

• Turbosound iQ10 powered loudspeaker

Who Is It For

The Turbosound iQ10 is intended for musicians, DJs, sound engineers, venues and installation professionals who require a compact powered loudspeaker for portable music systems, speech reinforcement, stage monitoring or permanent installations.

Can’t find the Turbosound product you are looking for?

Contact us: info@stageiq.lt or +370 636 55536.