Turbosound iP82 Passive 2-Way 8-Inch Loudspeaker

Turbosound iP82 Passive 2-Way Loudspeaker

The Turbosound iP82 is a compact passive 2-way loudspeaker for portable and small fixed sound systems used for music and speech reinforcement.

An 8-inch low-frequency driver and a 1-inch compression driver operate through an internal passive crossover. The high-frequency waveguide provides 70° horizontal by 70° vertical dispersion for consistent coverage across small and medium listening areas.

The iP82 is designed to serve as a satellite loudspeaker with Turbosound iP12B or iP15B powered subwoofers. It can also be deployed for stage-lip, side-fill, balcony and delay-line coverage.

The 15 mm birch plywood bass-reflex enclosure is protected by a powder-coated perforated steel grille with acoustic foam backing. An integrated handle, 35 mm pole socket and 9.3 kg net weight support efficient transport and setup.

Main Features

• The passive 2-way design is suitable for both music and speech reproduction.
• 150 W continuous and 600 W peak power handling supports compact sound reinforcement systems.
• The 8-inch low-frequency driver uses a low-mass voice coil for improved transient response.
• A 1-inch compression driver is coupled to a low-distortion high-frequency waveguide.
• 70° x 70° dispersion provides equal horizontal and vertical coverage.
• An internal passive crossover distributes the amplified signal between both drivers.
• The 4 Ω impedance is suitable for power amplifiers rated for this load.
• A Neutrik speakON NL4 connector provides a secure loudspeaker cable connection.
• The 35 mm socket supports mounting on a standard loudspeaker stand or pole.
• The birch plywood cabinet, steel grille and integrated handle suit portable operation.

Technical Specifications

• Product type: passive 2-way loudspeaker
• System: 2-way, bass-reflex enclosure
• Low-frequency driver: 1 x 8-inch (203 mm)
• High-frequency driver: 1 x 1-inch (25 mm) compression driver
• Frequency response: 70–18,000 Hz (±3 dB), 58–20,000 Hz (-10 dB)
• Power handling (IEC): 150 W continuous, 600 W peak
• Sensitivity: 91 dB (1 W / 1 m)
• Maximum SPL: 113 dB continuous, 119 dB peak
• Impedance: 4 Ω
• Nominal dispersion: 70° H x 70° V at -6 dB points
• Connector: 1 x Neutrik speakON NL4
• Connector wiring: pins 1+ / 1- input, pins 2+ / 2- not connected
• Pole socket: 35 mm
• Enclosure: 15 mm birch plywood with semi-matt black finish
• Grille: powder-coated perforated steel
• Dimensions: 455 x 280 x 235 mm (H x W x D)
• Net weight: 9.3 kg

The loudspeaker is sold individually. A power amplifier, speakON cable, stand and mounting pole are not included.

Who Is It For

The iP82 is suitable for concerts, events, conferences and small fixed sound systems. It can serve as the main loudspeaker in a compact system with an iP Series subwoofer or provide stage-lip, side-fill and delay coverage.

Can’t find the Turbosound product you are looking for?

Contact us: info@stageiq.lt or +370 636 55536.