Technics SL-1000R Turntable

Technics SL-1000R Turntable

A twin-rotor, double-coil coreless direct drive motor turns a platter weighing approximately 7.9 kg. Its 12-pole, 18-coil construction offsets the coils on opposite sides by 60° to reduce fine vibration and self-inductance.

The platter combines die-cast aluminium, a 10 mm brass layer and damping rubber. Tungsten weights around its outer edge increase rotational inertia. Reinforced thrust bearings with engineering-plastic components and two stainless-steel weights beneath the chassis increase rigidity and lower the centre of gravity.

A separate control unit houses the switching power supply and noise-reduction circuit, limiting interference reaching the main unit. It allows speed settings to two decimal places within a ±16% range, with the setting shown on an OLED display.

The S-shaped magnesium tonearm has precision suspension bearings and OFC internal wiring. Its base is rigidly integrated with the turntable mechanism to maintain the relationship between the bearings and stylus position. Hand assembly and adjustment complement the rigid five-layer cabinet and vibration-damping feet.

Main Features

• The coreless motor and low centre of gravity help maintain steady rotation and reduce mechanical noise.
• A three-layer platter with tungsten weights combines substantial rotating mass and resonance damping.
• Separate main and control units reduce the effect of power and control interference on the cartridge signal.
• 33 1/3, 45 and 78 rpm playback supports different record formats when used with a suitable cartridge.
• The OLED display shows speed to two decimal places so adjustments are clearly visible.
• A 15 mm tonearm height range and three auxiliary weights accommodate a wider choice of cartridges.
• Optional bases accept compatible SME or Ortofon tonearms, with up to three arms including the standard arm.
• PHONO output requires a separately purchased cable with a straight 5-pin DIN connector.

Technical Specifications

• Type: manual direct drive turntable
• Motor: twin-rotor, double-coil coreless brushless DC motor
• Speeds and adjustment: 33 1/3, 45 and 78 rpm; ±16%
• Starting torque: 0.39 N·m / 4.0 kg·cm
• Wow and flutter: 0.015% W.R.M.S.
• Platter: brass and die-cast aluminium; 323 mm; approx. 7.9 kg including mat
• Tonearm: S-shaped magnesium, static balance; effective length 254 mm, pivot-to-spindle distance 239 mm; overhang 15 mm
• Tracking error angle: within 1° 48′ at the outer groove and 0° 30′ at the inner groove of a 30 cm record
• Offset angle: 21°
• Tonearm adjustment: height 0–15 mm; stylus pressure 0–4 g
• Cartridge weight including headshell: 15.9–19.7 g without auxiliary weight; 18.8–23.6 g with small, 22.5–26.3 g with medium or 26.0–31.0 g with large auxiliary weight
• Output: PHONO 5-pin DIN terminal; straight cable connector only
• Power supply: 110–240 V AC, 50/60 Hz
• Power consumption: 10 W; approx. 0.05 W in standby
• Dimensions (W × H × D): main unit 531 × 188 × 399 mm; control unit 110 × 84 × 350 mm
• Weight: main unit approx. 40.2 kg; control unit approx. 2.1 kg
• Operating conditions: 0 °C to +40 °C; 35–80% relative humidity, no condensation

What’s Included

• Technics SL-1000R Turntable with control unit, 1 pc.
• Platter and mat
• Dust cover
• 45 rpm record adaptor
• Balance weight and three auxiliary weights
• Overhang gauge
• Platter fixing screw set
• Detachable platter handles and hex wrench
• Insulator attachments
• Region-appropriate mains lead
• Flight case

Cartridge, headshell and PHONO cable are not included. Remove the dust cover for playback; it cannot be used with a second tonearm fitted.

Who Is It For

For a component Hi-Fi system where you select the cartridge, headshell and phono stage separately. The heavy main unit needs a stable support, and cartridge alignment and tonearm settings must be completed before the first listening session.

Can’t find the Technics product you are looking for?

Contact us: info@stageiq.lt or +370 636 55536.