Tannoy GOLD 7 Active Studio Monitor

Tannoy GOLD 7 Active Studio Monitor

Tannoy GOLD 7 is an active studio monitor designed for accurate sound reproduction at close listening distances.

Its 6.5-inch Dual Concentric driver places the high-frequency driver in the centre of the low-frequency driver. This point-source arrangement provides controlled dispersion and a broad optimal listening area.

The low- and high-frequency drivers are powered separately by an integrated Class-AB bi-amplification system with 300 W maximum output power. A front-firing bass reflex port allows placement closer to a wall, while the high- and low-frequency controls help adapt the response to the room.

The balanced XLR and 1/4-inch TRS inputs remain active simultaneously, allowing two audio sources to be connected. A stereo signal enters through the 3.5 mm input and passes to a second monitor through the Monitor Link output, while a rear-panel switch assigns the left or right channel. Automatic standby can be switched on or off.

Main Features

• The 6.5-inch Dual Concentric design aligns the low- and high-frequency drivers on the same axis so that sound radiates from a single point.
• A 25.4 mm titanium high-frequency driver with a Tulip waveguide provides symmetrical 90° conical dispersion.
• The Class-AB bi-amplification system drives each transducer separately and delivers 300 W maximum output power.
• The front-firing bass reflex port allows the monitor to be positioned closer to a wall.
• Input level, high-frequency and bass controls allow the response to be adjusted for the listening environment.
• Simultaneously active balanced XLR and 1/4-inch TRS inputs support connection of two analogue sources.
• The 3.5 mm stereo input and Monitor Link output simplify connection of a two-monitor stereo system.
• Independent low- and high-frequency limiters help protect the transducers, while short-circuit and thermal protection safeguard the amplifier.
• Selectable automatic standby reduces power consumption when the monitor is not in use.

Technical Specifications

• Product type: active two-way nearfield studio monitor
• Frequency response: 65 Hz - 20 kHz, ±3 dB; 46 Hz - 20 kHz, -10 dB
• Maximum SPL: 110 dB
• Nominal dispersion: 90° conical at the -6 dB point
• Crossover: active, 1.5 kHz
• Low-frequency driver: 1 x 165 mm (6.5 in)
• High-frequency driver: 1 x 25.4 mm (1 in), titanium
• Amplification: Class-AB bi-amplification
• Maximum output power: 300 W
• Limiters: independent low- and high-frequency limiters
• Protection: short-circuit and thermal
• Inputs: 1 x balanced XLR, 1 x balanced 1/4-inch TRS, 1 x 3.5 mm stereo mini-jack
• Output: 1 x 3.5 mm stereo Monitor Link
• Input impedance: 5 kΩ unbalanced, 10 kΩ balanced
• Nominal sensitivity: 0 dBu
• Maximum input level: +20 dBu
• User controls: power, input trim, HF trim, bass adjustment, automatic standby
• Power consumption: 70 W at 1/8 maximum power
• Power supply: 100-240 V~, 50/60 Hz
• Dimensions: 357 x 221 x 288 mm
• Net weight: 9.4 kg

What’s Included

• Tannoy GOLD 7 studio monitor, 1 unit
• Region-appropriate IEC mains cable
• 5 m 3.5 mm stereo mini-jack cable

Who Is It For

Tannoy GOLD 7 is suitable for recording studios and workspaces where audio is monitored during recording, editing and mixing. It can also be used in broadcast and audio post-production systems.

Can’t find the Tannoy product you are looking for?

Contact us: info@stageiq.lt or +370 636 55536.