Showtec Photon Wash Linear LED Bar

Showtec Photon Wash Linear LED Bar

The Showtec Photon Wash is an IP65 linear fixture with sixteen individually controlled 20 W RGBM LEDs. It provides coloured lighting for stages and scenery indoors and at temporary outdoor events.

Standard optics produce a 10° horizontal by 33° vertical beam. Separately available beam shapers allow the distribution to be adapted to the installation.

DMX and RDM control is complemented by colour and program selection on the OLED display for stand-alone use. Precise low-end dimming helps produce smooth fades at low brightness.

Sliding mounting parts underneath the housing allow bracket positions to be adjusted around truss bracing. Two supplied standard brackets support floor or suspended installation; additional mounting configurations require optional accessories.

Main Features

• 16 individually controlled 20 W RGBM LEDs.
• 10° × 33° optics with optional beam shapers.
• 4-, 7-, 10-, 32-, 64- or 74-channel DMX personalities.
• RDM, automatic programs, manual colour and master/slave operation.
• Selectable 1, 3, 6 or 12 kHz PWM frequency.
• Dimmer curves, pixel direction reversal and DMX failure settings.
• Fanless convection cooling.
• IP65 Power Pro True and 5-pin DMX inputs and outputs.

Technical Specifications

• Function: Linear LED fixture for professional stage lighting
• Light Source: 16 × 20 W, RGBM
• Colour Mixing: RGBM
• LED Control: 16 individually controlled LEDs
• Refresh Rate: 1000 Hz
• Selectable PWM Frequency: 1 / 3 / 6 / 12 kHz
• Luminous Flux: 16543 lm
• Colour Rendering Index: 61
• Colour Temperature: 4300 K
• Beam Angle (H × V): 10° × 33°
• Control Modes: DMX, RDM, built-in programs, manual colour, master/slave
• DMX Channels: 4, 7, 10, 32, 64, 74
• Control Display: OLED
• Dimming and Strobe: 0–100 %; 0–20 Hz
• Additional Settings: Dimmer curves and response speed, pixel direction reversal and DMX failure behaviour
• Power Supply and Consumption: 100-240 V AC 50/60 Hz; 350 W
• Power Input / Output: Power Pro True IN / OUT
• Data Connections: 5-pin XLR IN / OUT (IP65)
• Optional Beam Shapers: 15°, 30° or 60° × 10°; sold separately
• Optional Accessories: Barndoors, vertical bracket and baseplate sold separately
• Dimensions (L × W × H): 1009 × 140 × 201 mm (with brackets, drawing position)
• Weight: 10.3 kg
• Ingress Protection: IP65, indoor and outdoor use subject to manual conditions
• Duty Limitation: Not designed for permanent operation; outdoor connections must maintain IP65 protection
• Housing and Cooling: Black aluminium housing, fanless passive cooling
• Mounting: Adjustable brackets for floor or suspended installation; clamps and safety cable sold separately
• Operating Temperature: −5 to 45 °C

What’s Included

• 1 × Showtec Photon Wash Linear LED Bar
• 1.5 m Schuko to Power Pro True power cable
• 2 standard mounting brackets

Beam shapers, barndoors, the vertical bracket and baseplate are sold separately. The fixture is intended for temporary outdoor use and is not designed for permanent operation. All connections must retain IP65 protection.

Who Is It For

For concert stages, scenery and temporary outdoor lighting systems that require individual LED colour control and flexible mounting arrangements.

Can’t find the Showtec product you are looking for?

Contact us: info@stageiq.lt or +370 636 55536.