Showtec Easy 16 DMX Lighting Controller

Showtec Easy 16 DMX Lighting Controller

Sixteen channel faders control 32 DMX channels across two selectable pages.

Page A addresses channels 1–16 and Page B assigns the same faders to channels 17–32. The controller stores 12 lighting scenes, which can also be used as steps in an automatically running chase.

Manual mode provides direct channel control. In Chase mode, the last four faders adjust chase direction, overall output level, speed and fade time as the stored scenes play in sequence.

The rear panel provides 3-pin XLR DMX input and output connectors. A detachable frame allows the metal-housed controller to be installed in a 19-inch rack, occupying 3U.

Main Features

• The PAGE button switches channel pages, with A/B LEDs identifying the active page.
• Twelve programmable scenes store prepared lighting settings.
• The built-in chase plays previously stored scenes automatically.
• Step hold time is adjustable from 0.1 second to 10 minutes.
• The fade setting adjusts scene transitions from 0 to 100%.
• Chase direction and overall chase output level from 0 to 100% are adjustable.
• Blackout temporarily disables DMX output without moving the faders.
• Manual and Chase LEDs identify the selected operating mode.

Technical Specifications

• Control protocol: DMX-512
• DMX channels: 32, two pages of 16 channels
• Controls: 16 faders, 20 buttons
• Scenes and chases: 12 scenes, 1 chase
• Modes: Manual, Chase
• DMX input: 3-pin male XLR
• DMX output: 3-pin female XLR
• Console power input: 9 V DC, 500 mA, low-voltage DC connector
• Power adapter: 230 V AC, 50/60 Hz input; 9 V DC output
• Power consumption: 4.5 W
• Dimensions (W × H × D): 535 × 100 × 195 mm
• Weight: 2.8 kg
• Mounting: 19-inch rack, 3U, detachable frame
• Housing: Metal
• Colour: Grey
• IP rating: IP20, indoor use only
• Ambient temperature: 0–40 °C
• LED indicators: Signal, page and mode

What’s Included

• Showtec Easy 16 DMX lighting controller, 1 pc
• DC power adapter with 1.75 m cable, 1 pc

A DMX cable is not included.

Who Is It For

For small lighting shows and test setups requiring up to 32 DMX channels and 12 stored scenes. Knowledge of DMX is required to connect and operate the system correctly.

Can’t find the Showtec product you are looking for?

Contact us: info@stageiq.lt or +370 636 55536.