Showtec ACT Fresnel 50 WW Fresnel Spotlight
Pay in instalments with ESTO
Couldn't load pickup availability
Description
Description
Showtec ACT Fresnel 50 WW Fresnel Spotlight
A 50 W warm white COB LED and Fresnel lens produce a soft, even field of light.
The beam can be adjusted mechanically from 10° to 58°, covering focused accents and wider stage areas without changing the lens. The supplied barndoor helps keep spill away from adjacent areas.
With a 3200 K colour temperature and CRI 98, the fixture is suited to lighting faces, costumes and exhibits where accurate colour rendering matters. Brightness can be set with the rear dimmer control or a DMX desk, without an external voltage dimmer.
Choose a 1-channel or 2-channel DMX personality. Selectable dimmer curves and LED or Halogen response let the fixture follow different lighting transitions. The IP20 housing is for indoor use only.
Main Features
- Fresnel optics give the illuminated area a soft edge.
- Adjust the 10–58° beam on the housing without swapping lenses.
- The included barndoor limits spill outside the intended area.
- CRI 98 helps preserve the appearance of illuminated colours.
- A rotary dimmer allows stand-alone operation without a DMX desk.
- The 2-channel DMX mode adds separate strobe control.
- Four dimmer curves and Halogen response adapt the light to different transitions.
- On DMX loss, retain the last state, recall a defined level or black out the output.
Technical Specifications
- Light Source: 1 × 50 W warm white COB LED
- Light Colour: warm white (WW)
- Colour Temperature: 3200 K
- CRI: 98
- Luminous Flux: 1841 lm
- Illuminance: 379 lx at 2 m
- LED Refresh Rate: 1100 Hz
- Beam Angle: 10–58°, manually adjustable
- Control: DMX and direct dimmer control
- DMX Channels: 1 or 2
- Dimming: 0–100 %
- Dimmer Curves: 4: Linear, Square Law, Inverse Square Law and S-Curve
- Dimmer Response: LED or Halogen
- DMX Signal Loss: Manually Defined, Hold or Blackout
- Strobe: yes
- Power Supply and Consumption: 100–240 V AC, 50/60 Hz; 57 W
- Connections: Power Pro power input/output, 3-pin XLR DMX input/output
- Display: OLED
- Housing: black aluminium housing
- Mounting: adjustable bracket
- Cooling: fan cooling
- IP Rating: IP20, indoor use only
- Maximum Ambient Temperature: 40 °C
- Dimensions (W × H × D): 165 × 239 × 245 mm
- Weight: 1.8 kg without accessories
What’s Included
- 1 × Showtec ACT Fresnel 50 WW Fresnel Spotlight
- Barndoor
- Colour filter frame
- 1.5 m Schuko to Power Pro power cable
Who Is It For
For small stages, theatre rehearsals and displays needing warm white light and an adjustable coverage area. The fixture uses fan cooling and is intended for indoor installation only.
Can’t find the Showtec product you are looking for?
Contact us: info@stageiq.lt or +370 636 55536.




