sE Electronics V PACK CLUB STANDARD Drum Microphone Kit

sE Electronics V PACK CLUB STANDARD Drum Microphone Kit

Four dynamic microphones cover kick, two toms and snare, while a matched pair of sE7 condensers captures the overall stereo sound. This six-microphone kit is designed for live performance and studio recording.

Two rear Classic/Modern switches on the V KICK independently shape its overall voicing and high-frequency response. Their four combinations range from a warmer, rounded tone to emphasized lows and a clear, pronounced attack.

The low-profile V BEAT microphones place their XLR connectors parallel to the mounting points. V CLAMP mounts grip drum rims with rubber jaws and provide height and angle adjustment, leaving more space around the toms and allowing precise aiming at the drumhead.

The factory-matched sE7 pair provides consistent stereo imaging. Switchable -20 dB pads accommodate loud sources, while 80 Hz low-cut filters reduce rumble and excess bass caused by proximity effect.

The plastic V CASE keeps the microphones and accessories in dedicated positions. Spare slots accommodate an extra V BEAT with V CLAMP and a hi-hat microphone.

Main Features

• V KICK swivel mount allows placement inside or outside the kick drum.
• V KICK and V BEAT combine balanced midrange with defined transients and deep lows.
• V7 X captures smooth highs and an extended, powerful low-frequency response.
• Supercardioid dynamic microphones reduce pickup of adjacent instruments; internal capsule suspension isolates mechanical vibration.
• The dynamic microphones use zinc-alloy bodies, steel grilles, gold-plated XLR contacts, aluminum voice coils and neodymium magnets. Red internal windscreens reduce wind noise.
• Beveled grille edges prevent the V KICK and V7 X from rolling when placed on a flat surface.
• The sE7 thin diaphragm captures fast transients. Discrete Class A circuitry has a short signal path and a transformerless output, while metal bodies with gold-plated XLR contacts shield electrical interference.

Technical Specifications

• V KICK: dynamic, supercardioid; 20–19000 Hz; impedance 300 Ω
• V KICK Sensitivity: 0.2 / 0.4 mV/Pa
• V KICK Dimensions and Weight: Ø 60 mm × 135 mm; 468 g
• V BEAT: dynamic, supercardioid; 30–19000 Hz; impedance 300 Ω
• V BEAT Sensitivity: 2 mV/Pa
• V BEAT Dimensions and Weight: Ø 61 mm × 110 mm; 347 g
• V7 X: dynamic, supercardioid; 30–19000 Hz; impedance 300 Ω
• V7 X Sensitivity: 2 mV/Pa
• V7 X Dimensions and Weight: Ø 47 mm × 176 mm; 269 g
• sE7: 1/2-inch back-electret condenser, cardioid; 20–20000 Hz; impedance <200 Ω
• sE7 Sensitivity and Load: 19 mV/Pa; recommended load >1 kΩ
• sE7 Maximum SPL: 136 / 156 dB at 0 / -20 dB attenuation (0.5% THD, 1 kHz)
• sE7 Noise and Dynamics: equivalent noise level 16 dB(A); S/N 78 dB; dynamic range 120 / 140 dB (0 / -20 dB)
• sE7 Filter and Pad: 80 Hz, 6 dB/oct.; -20 dB
• sE7 Power: 48 V phantom (IEC 61938), 3 mA each
• sE7 Dimensions and Weight: Ø 23 mm × 120 mm; 128 g
• All Microphone Outputs: 3-pin XLR (male)

What’s Included

• 1 × six-microphone kit: V KICK, 2 × V BEAT, V7 X and a matched pair of 2 × sE7
• 2 × V CLAMP drum-rim mounts
• 1 × V7 X and 2 × sE7 microphone clips
• 6 × microphone stand thread adapters
• 2 × knurled nuts for LP Mic Claw mounts
• 1 × V CASE plastic flight case

The extra microphones and V CLAMP are not included. Individual microphone pouches and spare internal windscreens are not supplied in this pack.

Who Is It For

Use the kit to reinforce or record acoustic drums with individual kick, tom and snare signals plus a stereo overhead image. The V7 X can also capture guitar cabinets or brass instruments.

Can’t find the sE Electronics product you are looking for?

Contact us: info@stageiq.lt or +370 636 55536.