sE Electronics V PACK ARENA (Black) Drum Microphone Kit

sE Electronics V PACK ARENA (Black) Drum Microphone Kit

Seven microphones cover kick, three toms, snare and stereo overheads. This black-finish kit is designed for live performance, rehearsals and studio recording.

Two rear Classic/Modern switches on the V KICK independently shape its overall voicing and high-frequency response. Their four combinations range from a warmer, rounded tone to emphasized lows and a clear, pronounced attack.

The low-profile V BEAT microphones place their XLR connectors parallel to the mounting points. V CLAMP rim mounts provide height and angle adjustment, leaving more space around the toms and allowing precise aiming at the drumhead.

The factory-matched sE8 pair provides consistent stereo imaging. Its attenuation pads help prevent input overload, while low-cut filters reduce rumble and excess bass caused by proximity effect.

The robust plastic V CASE keeps the microphones and accessories in dedicated positions, with an extra slot for a small-diaphragm microphone.

Main Features

• V KICK swivel mount allows placement inside or outside the kick drum.
• V KICK and V BEAT combine balanced midrange with defined transients and deep lows.
• V7 X captures smooth highs and an extended, powerful low-frequency response.
• Supercardioid dynamic microphones reduce pickup of adjacent instruments; internal capsule suspension isolates mechanical vibration.
• The dynamic microphones use zinc-alloy bodies, steel grilles, gold-plated XLR contacts, aluminum voice coils and neodymium magnets. Red internal windscreens reduce wind noise.
• sE8 microphones feature handcrafted capsules with 3 µm gold-sputtered diaphragms and transformerless Class A circuitry without integrated circuits. Metal bodies shield electrical interference.

Technical Specifications

• V KICK: dynamic, supercardioid; 20–19000 Hz; impedance 300 Ω
• V KICK Sensitivity: 0.2 / 0.4 mV/Pa
• V KICK Dimensions and Weight: Ø 60 mm × 135 mm; 468 g
• V BEAT: dynamic, supercardioid; 30–19000 Hz; impedance 300 Ω
• V BEAT Sensitivity: 2 mV/Pa
• V BEAT Dimensions and Weight: Ø 61 mm × 110 mm; 347 g
• V7 X: dynamic, supercardioid; 30–19000 Hz; impedance 300 Ω
• V7 X Sensitivity: 2 mV/Pa
• V7 X Dimensions and Weight: Ø 47 mm × 176 mm; 269 g
• sE8: 1/2-inch condenser, cardioid; 20–20000 Hz; impedance 110 Ω
• sE8 Sensitivity and Load: 25 mV/Pa (-32 dBV); recommended load >1 kΩ
• sE8 Maximum SPL: 139 / 149 / 159 dB at 0 / -10 / -20 dB attenuation (0.5% THD, 1 kHz)
• sE8 Noise and Dynamics: equivalent noise level 13 dB(A); S/N 81 dB; dynamic range 126 / 136 / 146 dB (0 / -10 / -20 dB)
• sE8 Filters and Pads: 80 / 160 Hz, 6 dB/oct.; -10 / -20 dB
• sE8 Power: 48 V phantom (IEC 61938), 2.7 mA each
• sE8 Dimensions and Weight: Ø 23 mm × 120 mm; 141 g
• All Microphone Outputs: 3-pin XLR (male)

What’s Included

• 1 × seven-microphone kit: V KICK Black, 3 × V BEAT Black, V7 X Black and a matched pair of 2 × sE8
• 3 × V CLAMP drum-rim mounts
• 1 × V7 X and 2 × sE8 microphone clips
• 7 × microphone stand thread adapters
• 3 × knurled nuts for LP Mic Claw mounts
• 1 × V CASE plastic flight case

The extra microphone is not included. Individual microphone pouches and spare internal windscreens are not supplied in this pack.

Who Is It For

Use the kit to reinforce or record acoustic drums with individual kick, tom and snare signals plus a stereo overhead image. The V7 X can also capture guitar cabinets or brass instruments.

Can’t find the sE Electronics product you are looking for?

Contact us: info@stageiq.lt or +370 636 55536.