Samson Servo 120a Power Amplifier
Pay in instalments with ESTO
Couldn't load pickup availability
Description
Description
Samson Servo 120a Power Amplifier
This power amplifier drives passive speakers in stereo or combines its two channels into one bridged output. Rated output is 2 × 60 W into 4 Ω in stereo, or 120 W into 8 Ω in bridge mode.
Convection cooling eliminates the need for a fan. This makes the amplifier useful in studios and other quiet listening spaces where fan noise would be distracting.
Balanced 6.35 mm TRS and unbalanced RCA inputs accept a mixer, preamplifier or other line-level source. Rear binding posts connect to the speakers.
The front headphone output allows private listening to the signal. Inserting headphones does not automatically mute the speaker outputs: use the Speaker switch to turn them off.
Main Features
- The 1U chassis fits a 19-inch rack using the included rack ears.
- Independent 41-position level controls adjust the left and right channels separately.
- 10-segment LED meters display channel output levels, with Peak indication for clipping.
- Bridge mode uses the left input and an 8 Ω speaker; stereo operation requires at least 4 Ω per channel.
- A bipolar amplifier circuit and toroidal power transformer.
- Protection circuitry disconnects the speakers in the event of overheating, short circuits or dangerous DC at the output.
- A startup delay and relay protection reduce power-on and power-off thumps at the speakers.
- A steel chassis and aluminum heat sink suit fixed installations and rack mounting.
Technical Specifications
- Stereo Output Power: 2 × 60 W into 4 Ω; 2 × 50 W into 8 Ω (1 kHz, <0.05% THD+N)
- Bridged Output Power: 120 W into 8 Ω (1 kHz, <0.05% THD+N)
- Output at 1% THD+N: Stereo: 2 × 80 W into 4 Ω or 2 × 55 W into 8 Ω; bridged: 150 W into 8 Ω (1 kHz)
- Speaker Impedance: Stereo: 4 Ω minimum per channel; bridge mode: 8 Ω
- Frequency Response: 10 Hz - 20 kHz (+0/−0.5 dB); 3 Hz - 65 kHz (+0/−3 dB)
- Typical THD+N: 0.01% (80 kHz LPF, 1 kHz, rated output)
- Typical IMD: 0.03% (SMPTE 4:1, 60 Hz and 7 kHz, rated output)
- Signal-to-Noise Ratio: 105 dB (22 Hz - 22 kHz, referenced to rated output)
- Input Sensitivity: RCA: −10 dBV; TRS: +4 dBu for rated output, level controls at maximum
- Channel Crosstalk: −75 dB at 1 kHz
- DC Output Offset: ±50 mV, DC servo controlled
- Headphone Output Power: 400 mW into 100 Ω (1% THD+N)
- Connections: 2 × balanced 6.35 mm TRS inputs, 2 × unbalanced RCA inputs, speaker binding posts, 6.35 mm headphone output, IEC mains input
- Power Supply: 115 / 230 V AC, 50/60 Hz, depending on regional version
- Dimensions (W × H × D): 444 × 44 × 292 mm
- Weight: 7 kg
What’s Included
- 1 × Servo 120a power amplifier
- 19-inch rack ears
- Region-appropriate IEC mains cable
Who Is It For
For passive studio or stage speakers and fixed sound installations. Particularly useful where quiet cooling and headphone listening with separately switched speaker outputs are important.
Can’t find the Samson product you are looking for?
Contact us: info@stageiq.lt or +370 636 55536.




