Samson EarAmp EWM100 K Wireless In-Ear Monitor System
Pay in instalments with ESTO
Couldn't load pickup availability
Description
Description
Samson EarAmp EWM100 K Wireless In-Ear Monitor System
The ET100 transmitter sends a stereo or mono monitor feed from your mixer to the belt-worn ER100 receiver. Zi150 earphones let the performer hear the mix while moving around the stage. This K-band version operates at 470–502 MHz.
Two balanced XLR / 6.35 mm TRS combo inputs accept the mixer feed. A pair of loop outputs passes the same signal to other audio equipment, while a front-panel 6.35 mm headphone socket lets the engineer check the transmitted audio.
The performer controls volume and left/right balance on the ER100. If the mixer routes vocals and instruments to separate channels, mono mode allows their relative level to be adjusted at the receiver. One ET100 can feed several ER100 receivers.
Automatic frequency scanning and bidirectional infrared synchronisation help match the transmitter and receiver. Their displays show group, channel, frequency and signal level. Custom device names help identify units when several systems are used.
Main Features
- High-frequency boost, a limiter and additional volume boost tailor ER100 playback to the earphones and monitor mix.
- User preset groups store selected frequencies for quick recall.
- Control locking prevents accidental setting changes during a performance.
- The detachable antenna connects to the front or rear BNC socket to suit the transmitter installation.
- The half-rack transmitter mounts alone or beside a second unit in a 19-inch rack using the supplied hardware.
- Zi150 earphones isolate outside noise, with foam and silicone tips for a secure fit. Samson also highlights their strong bass response.
Technical Specifications
- Frequency Band: K, 470–502 MHz; 32 MHz tuning bandwidth
- Channel Plan: 10 factory groups of 18 channels; 5 user groups of 10 channels
- Operating Range: up to 90 m, line of sight; environment dependent
- Audio Frequency Response: 25 Hz - 15 kHz ±3 dB
- Signal-to-Noise Ratio: >100 dB
- THD: <0.9% (1 kHz)
- ER100 Headphone Output: 3.5 mm TRS, stereo
- ER100 Output Power: 2 × 150 mW (1 kHz, THD 3%)
- Stereo Separation: ≥55 dB (1 kHz)
- High-Frequency Boost: +8 dB at 10 kHz
- Limiter: off, -6 dB, -12 dB, -18 dB
- Volume Boost: 0 dB, +3 dB, +6 dB
- ET100 Inputs: 2 balanced XLR / 6.35 mm TRS combo
- ET100 Outputs: 2 balanced 6.35 mm TRS loop; 6.35 mm stereo headphones
- ET100 Antenna Connections: 2 BNC, front and rear
- MPX Pilot Tone: 19 kHz
- ET100 Power Supply: 12 V DC
- ER100 Power and Battery Life: 2 AA batteries; up to 8 hours
- ET100 Dimensions (L × W × H): 206 × 199 × 44 mm
- ER100 Dimensions (L × W × H): 65 × 23 × 90 mm
- RF Noise Muting: adjustable squelch
- ET100 Weight: 0.96 kg
- ER100 Weight: 0.1 kg
What’s Included
- 1 × Samson EarAmp EWM100 system: ET100 transmitter and ER100 receiver
- Zi150 earphones with small, medium and large foam and silicone tips
- Transmitter power adapter
- Detachable BNC antenna
- 19-inch rack mounting hardware
Who Is It For
For concerts, theatre and other performances requiring personal monitoring through earphones. Additional ER100 receivers must use the same band. Multiple receivers on one transmitter share its feed; independent mixes require suitable mixer outputs and additional transmitters.
Can’t find the Samson product you are looking for?
Contact us: info@stageiq.lt or +370 636 55536.






