Samson EarAmp ER100 K Wireless Receiver
Pay in instalments with ESTO
Couldn't load pickup availability
Description
Description
Samson EarAmp ER100 K Wireless Receiver
The ER100 receives a monitor feed from an ET100 transmitter and delivers it through a 3.5 mm stereo headphone output. Clip it to a belt or instrument strap and adjust listening level on stage. This K-band version operates at 470–502 MHz.
Choose stereo or mono operation and adjust left/right balance. When the mixer sends vocals and instruments to separate ET100 channels, mono mode lets the performer change their relative level without altering the feed at the mixer.
Automatic scanning searches by group or channel. Infrared synchronisation transfers frequency settings from receiver to transmitter or in the opposite direction. Both units must be set to the same operating frequency.
The display shows battery condition, RF and audio levels, group and channel. Adjustable brightness and a custom name make the unit easier to identify. The rotary volume control also switches the receiver on and off.
Main Features
- Several ER100 receivers can share one ET100, allowing more performers to hear the same transmitted programme.
- High-frequency boost adds clarity when the earphone mix sounds dull.
- The selectable limiter helps control louder signal peaks.
- Additional 0 dB, +3 dB or +6 dB volume boost accommodates different headphones.
- User groups store selected frequencies, while control locking protects settings from accidental changes.
- Adjustable squelch mutes radio noise when a valid signal is absent.
Technical Specifications
- Compatible Transmitter: Samson EarAmp ET100 in the same K band
- Frequency Band: 470–502 MHz
- Channel Plan: 10 factory groups of 18 channels; 5 user groups of 10 channels
- Operating Range with ET100: up to 90 m, line of sight; environment dependent
- Frequency Response with ET100: 25 Hz - 15 kHz ±3 dB
- System Signal-to-Noise Ratio: >100 dB
- System THD: <0.9% (1 kHz)
- Tuning Bandwidth: 32 MHz
- MPX Pilot Tone: 19 kHz
- Headphone Output: 3.5 mm TRS, stereo
- Output Power: 2 × 150 mW (1 kHz, THD 3%)
- Stereo Separation: ≥55 dB (1 kHz)
- High-Frequency Boost: +8 dB at 10 kHz
- Limiter: off, -6 dB, -12 dB, -18 dB
- Power Supply: 2 AA batteries
- Battery Life: up to 8 hours
- Dimensions (L × W × H): 65 × 23 × 90 mm
- Weight: 0.1 kg
What’s Included
- 1 × Samson EarAmp ER100 K wireless receiver with belt clip
This is a separately sold receiver. Operation requires a compatible ET100 transmitter and headphones connected to the receiver.
Who Is It For
For expanding an existing EarAmp setup or replacing a receiver. Several performers can share one ET100 feed while setting their own volume and balance. Adding a receiver does not create an independent extra monitor mix at the mixer.
Can’t find the Samson product you are looking for?
Contact us: info@stageiq.lt or +370 636 55536.





