Pioneer DJ VM-70 Studio Monitor

Pioneer DJ VM-70 Studio Monitor

Pioneer DJ VM-70 is an active two-way studio monitor.

Flat voicing supports critical listening during music production in a home or professional studio. The monitor also suits DJ practice, with a fast, punchy bass response. Rear-panel LOW EQ and HIGH EQ controls adapt the response to the room and speaker placement.

Separate Class D amplifiers with 96 kHz DSP drive the 165 mm aramid-fibre woofer and 25 mm soft-dome tweeter. A 4 mm aluminum front baffle suppresses vibrations, while the constant-directivity horn provides broad, even mid- and high-frequency coverage.

An audio interface, DJ mixer or other analog equipment connects through the balanced XLR/TRS input or unbalanced RCA input. Each monitor has its own rear-panel volume control.

Main Features

• Vortex Bass Accelerator ribs guide airflow through the port to reduce unwanted vibrations.
• The aramid cones are 30% lighter than conventional paper-lined aramid cones.
• LOW EQ and HIGH EQ each have 4 positions, giving 16 combinations. FLAT settings retain the neutral response.
• CLUB BASS emphasises the low end; BRIGHT TREBLE brings out high-frequency instrument detail.
• A tweeter guard helps protect the high-frequency diaphragm from damage.
• XLR/TRS and RCA input signals are mixed, so match the levels of connected sources.
• Auto standby activates after approximately 20 minutes without a signal and wakes the monitor when audio returns. The AUTO STANDBY function can be disabled.
• Connect each monitor to the mains with its supplied power cord. Sold as 1 unit; a stereo pair requires two.
• The supplied bottom cushions help prevent the monitor from sliding.

Technical Specifications

• Sales unit: 1 unit
• Amplifier output: LF 70 W / 4 Ω, HF 30 W / 4 Ω
• Woofer: 1 × 165 mm (6.5-inch), aramid fibre
• Tweeter: 1 × 25 mm (1-inch), soft dome
• Enclosure: MDF with vinyl laminate, bass reflex design
• Inputs: 1 × balanced XLR / 6.35 mm TRS combo, 1 × unbalanced RCA
• Power supply: AC 110–240 V, 50/60 Hz
• Power consumption: 45 W; standby 0.3 W; power off 0.1 W
• Dimensions (W × H × D): 229 × 341 × 312 mm
• Weight: 7.7 kg
• Frequency range: 37 Hz - 36 kHz
• Maximum SPL: 112 dB
• Input impedance: 10 kΩ
• LOW EQ L1 ROOM 1: 6 dB high-pass filter at 63 Hz
• LOW EQ L2 FLAT: flat response
• LOW EQ L3 ROOM 2: +2.5 dB bell EQ at 50 Hz
• LOW EQ L4 CLUB BASS: +5 dB at 50 Hz and +2 dB at 200 Hz
• HIGH EQ H1 ROOM 1: -3 dB high-shelf EQ, 3.5–12 kHz
• HIGH EQ H2 FLAT: flat response
• HIGH EQ H3 ROOM 2: +3 dB high-shelf EQ at 7 kHz
• HIGH EQ H4 BRIGHT TREBLE: +1.5 dB at 4 kHz and +3.5 dB at 8 kHz

Colour: black.

Leave at least 15 cm of ventilation clearance above, behind and on both sides.

What’s Included

• Pioneer DJ VM-70 studio monitor (1 unit)
• Power cord (1)
• Bottom cushions: 1 sheet of 4

Who Is It For

For monitoring during music production in a home or professional studio, as well as DJ practice. EQ adjustments help adapt the monitors to a particular room.

Can’t find the Pioneer DJ product you are looking for?

Contact us: info@stageiq.lt or +370 636 55536.