Peavey PVXp 12 Bluetooth Powered Loudspeaker

Peavey PVXp 12 Bluetooth Powered Loudspeaker

Peavey PVXp 12 Bluetooth is a powered loudspeaker with a built-in three-channel mixer. The two-way system pairs a 12-inch woofer with an RX14 titanium-diaphragm compression driver.

Separate amplifier sections drive the low- and high-frequency units. The stated 980 W total is peak power, comprising 840 W for the woofer and 140 W for the high-frequency driver. Continuous sine-wave ratings are listed separately in the specifications.

Two mic/line channels use combo XLR / 1/4-inch inputs. The third accepts Bluetooth or auxiliary audio, allowing microphones and a music source to connect without a separate small mixer.

Three-band EQ and level controls on each channel balance connected sources. The built-in DSP provides an LCD, selectable presets and DDT limiting to manage overload.

The trapezoidal enclosure works on a stand or on its angled side as a floor monitor. A 36 mm pole socket and mounting points provide installation options, with suitable mounting accessories selected separately.

Main Features

• The three-channel mixer combines microphones and recorded music.
• Two PVXp Bluetooth loudspeakers can link wirelessly for stereo or dual-mono playback.
• Two Mic/Line inputs accept microphone or line-level signals.
• Normal, Live, Club and Speech presets tailor the sound to the programme.
• An asymmetrical high-frequency horn directs sound towards the listening area.
• Loudspeaker parameters can be controlled through the LCD or the manufacturer’s iOS app.
• DDT limiting reduces the effects of amplifier overload.
• An XLR mix output sends the signal to additional audio equipment.
• The angled enclosure supports floor-monitor placement.
• Built-in handles make the loudspeaker easier to carry.

Technical Specifications

• System: powered two-way with separate LF and HF amplification
• Drivers: 12-inch woofer; RX14 with 1.4-inch titanium diaphragm
• Peak Power: 980 W, 840 W LF + 140 W HF
• Continuous Sine-Wave Power: 375 W LF + 50 W HF, below 1% THD before limiting
• Maximum SPL: 127 dB peak at 1 m
• Coverage: 100° horizontal x 50° vertical; horn aimed 10° downwards
• Mixer: three channels; two Mic/Line, Bluetooth / auxiliary
• Connections: two combo XLR / 1/4-inch inputs; auxiliary; XLR mix output
• Pole Socket: 36 mm
• Dimensions (H x W x D): 622 x 409 x 381 mm, at the front of the enclosure
• Weight: 19.1 kg
• Frequency Response (±3 dB): 63 Hz-20 kHz; at 1 m in anechoic conditions
• Low-Frequency Limit (-10 dB): 56 Hz, anechoic
• DSP Presets: Normal, Live, Club, Speech; Pole, Bracket and Monitor locations
• Delay: 0-10 m in 1 m steps; up to approximately 29 ms
• Channel 1 and 2 High-Pass Filter: 20-400 Hz
• DSP: 48 kHz / 24-bit input and output; 56-bit internal processing
• Mounting Points: M10 top and bottom; M8 top, bottom and right side
• Microphone Phantom Power: not provided
• Power: 220-240 V AC, 50/60 Hz

What’s Included

• Peavey PVXp 12 Bluetooth Powered Loudspeaker (1 unit)
• Region-appropriate power cord

Who Is It For

For live music, speech reinforcement and stage monitoring. The onboard mixer suits a compact setup with microphones and a music source connected to one loudspeaker.

Can’t find the Peavey product you are looking for?

Contact us: info@stageiq.lt or +370 636 55536.