Peavey PVXp 10 Bluetooth Powered Loudspeaker

Peavey PVXp 10 Bluetooth Powered Loudspeaker

Peavey PVXp 10 Bluetooth is a powered two-way loudspeaker with a 10-inch woofer and a RX10 compression driver with a 1 inch titanium diaphragm. Its internal amplifiers provide 520 W of total peak dynamic power; this is not a continuous RMS rating.

A built-in three-channel mixer combines microphones, line sources and music. The first two channels have combination XLR/1/4-inch inputs and Mic/Line selection. The third accepts Bluetooth audio or a 3.5 mm AUX source.

The DSP display and a single push encoder adjust channel levels, three-band EQ and system settings. Factory presets adapt the speaker to different placements, while filtering, compression and limiting manage the signal sent to the drivers.

The horn provides 100-degree horizontal and 60-degree vertical coverage, with its main vertical axis tilted down by 10 degrees. The enclosure supports a suitable speaker stand or angled stage-monitor placement.

An XLR output feeds a full-range signal to another powered speaker, powered subwoofer or suitable audio device. Microphone inputs have no phantom power, so microphones requiring it need a separate compatible powering solution.

Main Features

• 520 W total peak dynamic amplifier power.
• 10-inch woofer and titanium-diaphragm high-frequency driver.
• Three-channel mixer with DSP control.
• Two combination microphone/line inputs.
• Bluetooth and 3.5 mm AUX on channel three.
• Channel level and three-band EQ settings.
• DSP filters, compression and limiting.
• XLR output for full-range signal distribution.
• The enclosure supports speaker-stand and stage-monitor placement.

Technical Specifications

• System: powered two-way loudspeaker
• Peak Power: 520 W, dynamic, total
• Woofer: 10 inches
• High-Frequency Driver: RX10, 1 inch titanium diaphragm
• Frequency Response: 65 Hz to 20 kHz, ±3 dB
• Coverage: 100 degrees horizontal x 60 degrees vertical
• Maximum SPL: 123 dB peak, music signal
• Mixer: three-channel, with DSP and EQ
• Inputs: two combination XLR/1/4-inch, 3.5 mm AUX, Bluetooth
• Phantom Power: unavailable
• Output: XLR, full-range signal
• Product Weight: 12.4 kg

What’s Included

• Peavey PVXp 10 Bluetooth Powered Loudspeaker (1 unit)

Who Is It For

For sound engineers and musicians using mobile sound systems. The built-in mixer operates a compact setup at the speaker, while the XLR output distributes signal to additional powered audio equipment.

Can’t find the Peavey product you are looking for?

Contact us: info@stageiq.lt or +370 636 55536.