Neutrik NAC3M-TRUE1-L Power Connector
Pay in instalments with ESTO
Couldn't load pickup availability
Description
Description
Neutrik NAC3M-TRUE1-L Power Connector
This male powerCON TRUE1 cable connector uses a twist lock and is rated at 16 A / 250 V AC in Europe.
The L version accepts a 10–16 mm outside cable diameter. Conductors are secured by screw terminals using a T8 tool.
The polyamide housing resists UV exposure. IP65 and IP67 protection applies when mated or closed with a suitable protective cap; the cap is an optional accessory.
The connector has CBC breaking capacity. Installation requires a qualified person, and equipment must be de-energized before plugging in the male contact. A special tool is required to open the cable bushing.
Main Features
- The twist lock retains the connector in its intended mated position.
- The cable-retention system fits a 10–16 mm diameter, so the full cable outside diameter determines L-version fit.
- The PA 66 housing and F1 UV resistance suit demanding environments.
- The 2 + PE arrangement includes a protective-earth contact.
Technical Specifications
- Model: NAC3M-TRUE1-L, powerCON TRUE1
- Type: Male cable power connector with twist lock
- Contacts: 2 + PE
- European rating: 16 A / 250 V AC to EN IEC 60320-1
- North American rating: 20 A / 250 V AC to UL 60320-1, CSA C22.2 No. 60320-1 and UL 498
- Breaking capacity: CBC
- Contact resistance: ≤ 2 mΩ
- Dielectric strength: 4 kV DC / 2.8 kV AC
- Insulation resistance: > 0.1 GΩ after the damp and heat test to IEC 68-2-30
- Cable outside diameter: 10–16 mm
- Wire cross-section: 1.5–2.5 mm², 14–12 AWG
- Termination: Screw terminals, T8
- Mating cycles: > 5000
- Contact material: Copper alloy, 2 µm silver plating
- Shell, insert and locking element: Polyamide PA 66
- Cable-retention material: Polyketone
- Flammability: UL 94 V-0
- Protection: IP65 / IP67 when mated or closed with a suitable cap
- UV resistance: F1
- Temperature to IEC 61984: -30 to +80 °C
- Temperature to IEC 60320-1: -5 to +40 °C, 24-hour average no higher than +35 °C
- Certification: ENEC / VDE: IEC 60320-1 and EN IEC 60320-1; UL / CSA: UL 60320-1 and CSA C22.2 No. 60320-1; UL 498
- Dimensions: 79–82.5 mm long, 26.8 mm diameter
- Approved EU cable: H07RN-F 3G2.5 mm²
- Compatible chassis sockets: NAC3FPX-TRUE1 and NAC3PX-TRUE1, IP65 / IP67
With the earlier NAC3FPX-TOP and NAC3PX-TOP sockets, the connection is rated IP65.
What’s Included
- 1 × Neutrik NAC3M-TRUE1-L power connector
Who Is It For
For power cables in audio, lighting and stage systems using a compatible powerCON TRUE1 interface. Check cable diameter, wire cross-section and mating compatibility against the manufacturer’s instructions.
Can’t find the Neutrik product you are looking for?
Contact us: info@stageiq.lt or +370 636 55536.




