DPA MMP-C Microphone Preamp
Pay in instalments with ESTO
Couldn't load pickup availability
Description
Description
DPA MMP-C Microphone Preamp
DPA MMP-C is a compact preamp for the modular pencil microphone series.
It combines with a DPA capsule from the series. The capsule determines the pickup pattern, while the MMP-C supplies a 3-pin XLR output. The connected equipment must provide P48 phantom power.
The preamp is 41 mm long, 19 mm in diameter and weighs 40 g, making it suitable for installations with little mounting space. DPA describes its character as slightly softer than that of the other preamps in the series.
Its active drive provides an impedance-balanced output. DPA specifies cable drive capability up to 100 m. The dynamic-range and shorted-input noise figures below describe the preamp itself; the acoustic performance of a complete microphone also depends on the capsule.
Main Features
- The 41 mm housing fits microphone positions with limited mounting space.
- One preamp can be combined with different compatible DPA modular capsules.
- The balanced XLR output connects to equipment supplying P48 phantom power.
- DPA specifies up to 100 m cable drive capability for its active output.
Technical Specifications
- Compatibility: DPA modular pencil microphone capsules
- Output Connector: 3-pin male XLR
- XLR Pinout: pin 1 shield, pin 2 signal +, pin 3 signal −
- Output Type: active impedance-balanced output
- Output Impedance: less than 200 Ω
- Power Supply: P48 phantom, 48 V ±4 V for full specifications
- Current Consumption: 2.8 mA
- Common Mode Rejection Ratio (CMRR): greater than 50 dB
- Low-Cut Frequency (−3 dB): 15 Hz
- Noise with Shorted Input (A-weighted): 0.6 µV
- Distortion (THD, 1 V RMS, 1 kHz): less than 0.2%
- Dynamic Range: 136 dB
- Cable Drive Capability: 100 m
- Dimensions: 41 mm length, 19 mm diameter
- Weight: 40 g
- Color: matte black
- Operating Temperature: −40 °C to 45 °C
- Relative Humidity: up to 90%
What’s Included
- 1 × DPA MMP-C preamp
Who Is It For
For a modular DPA microphone where a short preamp body and XLR output are needed. The capsule and pickup pattern are selected separately.
Can’t find the DPA product you are looking for?
Contact us: info@stageiq.lt or +370 636 55536.




