KRK ROKIT 5 Generation Five Active Studio Monitor

KRK ROKIT 5 Generation Five Active Studio Monitor

The KRK ROKIT 5 Generation Five active studio monitor is designed for music production, recording, mixing, mastering, and critical listening in nearfield monitoring environments.

Integrated digital signal processing provides three distinct voicing modes. Mix mode delivers a flat frequency and phase response for mixing, mastering, and critical listening. Create mode is intended for writing, producing, and casual listening, while the midrange-focused Focus mode helps analyse the frequency range where vocals and many instruments contain most of their energy.

The monitor offers 25 boundary and tuning EQ combinations to help adapt its response to the room and monitor placement. Settings are controlled using the rear-panel display and rotary control. The free KRK Audio Tools app provides a real-time room analyser and EQ recommendation tool to assist with monitor setup.

The two-way bass reflex system features a 5-inch low-frequency driver with a woven Kevlar® aramid-fibre cone and a 1-inch silk-dome high-frequency driver. A front-firing bass reflex port and low-diffraction baffle design support low-frequency performance, reduced distortion, and improved stereo imaging.

Separate Class D amplifiers provide 35 W for the low-frequency driver and 20 W for the high-frequency driver. Total rated power is 55 W, total dynamic power reaches 130 W, and the maximum SPL is 104 dB. A balanced XLR / 1/4-inch TRS combination input accommodates audio interfaces, mixing consoles, and monitor controllers.

Main Features

• Mix, Focus, and Create voicing modes adapt the monitor to different stages of music production and sound evaluation
• Mix mode provides a flat frequency and phase response for mixing, mastering, and critical listening
• Focus mode emphasises the midrange to assist with the analysis of vocals and instruments
• Create mode is designed for writing, producing, and casual listening
• 25 boundary and tuning EQ combinations help adapt the response to room acoustics and monitor placement
• 5-inch low-frequency driver with a woven Kevlar® aramid-fibre cone provides controlled diaphragm performance
• 1-inch silk-dome high-frequency driver extends the frequency range up to 40 kHz
• Separate Class D amplifiers efficiently drive the low- and high-frequency transducers
• Front-firing bass reflex port provides greater flexibility when positioning the monitor in the room
• Low-diffraction baffle design helps reduce distortion and improve stereo imaging
• Acoustic foam isolation wedge helps reduce vibration transfer and allows the monitor angle to be adjusted
• Two interchangeable magnetic faceplates allow the monitor to be used with or without protective grilles
• Integrated mounting points accommodate separately available KRK mounting brackets

Technical Specifications

• Product type: active studio monitor
• System: two-way bass reflex
• Voicing modes: Mix, Focus, Create
• Boundary and tuning EQ combinations: 25
• Low-frequency driver: 5-inch woven Kevlar® aramid-fibre cone, ferrite magnet
• High-frequency driver: 1-inch silk dome, copper cap, ferrite magnet
• Frequency response (±3 dB): 54 Hz–30 kHz
• Extended frequency range (+3/-10 dB): 43 Hz–40 kHz
• Crossover frequency: 2.27 kHz
• Amplifier configuration: bi-amplified, Class D
• Low-frequency amplifier power: 35 W
• High-frequency amplifier power: 20 W
• Total rated power: 55 W
• Total dynamic power: 130 W
• Maximum SPL: 104 dB
• Coverage angles: 155° horizontal × 126° vertical
• Analogue input: balanced XLR / 1/4-inch TRS combination input
• Input impedance: 5.12 kΩ balanced
• Signal-to-noise ratio: >101.5 dB with low-sensitivity balanced input setting; >94 dB with high-sensitivity unbalanced input setting
• AC input voltage: 100–240 V AC (±10%), 50/60 Hz
• Fuse: 5 × 20 mm T1A/250 V
• Enclosure construction: PVC vinyl-wrapped MDF
• Baffle construction: structurally reinforced high-impact polystyrene
• Mounting points: 4 × M6
• Dimensions: 288 × 191 × 242 mm (H × W × D)
• Weight: 4.95 kg
• Packaged dimensions: 400 × 260 × 320 mm (H × W × D)
• Packaged weight: 6.5 kg

What’s Included

• KRK ROKIT 5 Generation Five active studio monitor
• Magnetic faceplate with protective grilles
• Magnetic faceplate without grilles
• Acoustic foam isolation wedge
• AC power cable

One monitor is included. A stereo monitoring system requires two separately purchased KRK ROKIT 5 Generation Five monitors.

Who Is It For

The KRK ROKIT 5 Generation Five is designed for musicians, producers, and audio engineers who need a compact nearfield monitor for music production, recording, mixing, mastering, and critical listening. Its three voicing modes allow the same monitor to support different stages of the creative workflow.

Can’t find the KRK product you are looking for?

Contact us: info@stageiq.lt or +370 636 55536.