KLARK TEKNIK DN200 Audio Signal Balancer

Klark Teknik DN200 V2 2-Channel Active DI Box

Klark Teknik DN200 V2 is a two-channel active DI box with SUM and SPLIT signal-routing options.

It sends instrument, line-level, and consumer stereo sources to a mixing console through two balanced XLR outputs. The unit uses +48 V phantom power, independently switchable for each channel.

Two Combo XLR/TRS inputs and two 1/4-inch TRS link sockets accommodate instruments and line-level devices. A 1/8-inch stereo TRS input connects portable players, computers, and other stereo sources. SUM routes both inputs to both outputs, while SPLIT routes the left-channel input to both outputs.

The 20 dB pad accommodates higher-level sources. A ground-lift switch helps reduce ground-loop noise, and transformer isolation electrically separates connected stage equipment from the sound system. The aluminium enclosure is protected by rubber corners.

Main Features

• Two active DI channels for a stereo source or two independent mono signals.
• SUM and SPLIT switches adapt signal routing to different system requirements.
• Two Combo XLR/TRS inputs accept balanced and unbalanced instrument or line-level signals.
• 1/8-inch stereo TRS input for portable players, computers, and other stereo sources.
• Two 1/4-inch TRS link sockets pass signal on to other equipment.
• Transformer isolation electrically separates stage equipment from the sound system.
• 20 dB input pad accommodates higher-level sources.
• Ground-lift switch helps reduce noise caused by ground loops.
• +48 V phantom power is switched independently for each channel.
• Aluminium enclosure with rubber corners for transport and event use.

Technical Specifications

• Type: 2-channel active DI box
• Inputs: 2 x Combo XLR/TRS, 2 x 1/4-inch TRS link sockets, 1 x 1/8-inch stereo TRS
• Input Impedance: 1 MΩ via Combo and TRS link sockets, 20 kΩ with Combo XLR only, 500 kΩ via the 1/8-inch stereo TRS input
• Maximum Input Level: +28 dBu via Combo XLR and 1/4-inch TRS sockets, +21 dBu via the 1/8-inch TRS input, with pad enabled
• Input Pad: 20 dB
• Outputs: 2 x 3-pin XLR
• Output Impedance: 50 Ω
• Maximum Output Level: +13 dBu into a 10 kΩ load; +10 dBu into a 600 Ω load
• Minimum Load: 600 Ω
• Frequency Response: 20–20,000 Hz, ±1 dB into a 10 kΩ load
• THD+N: typically < 0.005% at 1 kHz, +10 dBu
• Noise: -103 dBu, 22–22,000 Hz unweighted, with input terminated by a 10 kΩ resistor
• Crosstalk: < -100 dB at 1 kHz, inputs terminated
• Power: +48 V phantom power
• Current Consumption: < 10 mA per channel
• Dimensions: 118 x 63 x 142 mm
• Weight: 0.65 kg

What’s Included

• 1 x Klark Teknik DN200 V2 2-channel active DI box

Who Is It For

Suitable for connecting stereo keyboards, playback devices, computers, two instruments, or other line-level sources to a mixing console. It can be used for concerts, rehearsals, conferences, broadcasts, and recording studios where the console provides +48 V phantom power.

Can’t find the Klark Teknik product you are looking for?

Contact us: info@stageiq.lt or +370 636 55536.