Fender Acoustic Junior GO Acoustic Guitar Amplifier
Pay in instalments with ESTO
Couldn't load pickup availability
Description
Description
Fender Acoustic Junior GO Acoustic Guitar Amplifier
The built-in lithium-ion battery gives you the option to play without a mains socket. Fender rates it for up to 12 hours at moderate volume or 5 hours at full volume.
Give your acoustic-electric guitar and vocal microphone a channel each. Both channels have independent volume, three-band EQ and effects, so you can use hall reverb for the vocal and a delay setting for the guitar. If you get acoustic feedback, try reversing the polarity of the affected channel.
The built-in looper lets a solo player record up to 90 seconds of accompaniment, then play or record another part over it. Use REC/DUB to start a recording or add a layer, PLAY/STOP to control playback and UNDO to remove the last layer.
Send a stereo mix to a mixer through the two balanced XLR outputs. The mono setting can feed a combined mix or route guitar and voice to separate mixer channels for independent level control. Recording to a computer via micro-USB captures the stereo mix of both channels, including AUX and Bluetooth audio.
Main Features
- A fully depleted battery takes about 4 hours to recharge. A colour indicator shows its status.
- Use the fold-out kickstand to tilt the cabinet upwards on the floor so you can hear your playing more clearly.
- The looper combines both channels into a single mono recording, which is cleared when the amp is powered off.
- Play a backing track from a phone or tablet over Bluetooth, or plug a player into the stereo AUX input. Set the playback level on the source device.
- The optional MGT-4 footswitch gives you hands-free control of effects and loops, tap tempo and the tuner.
Technical Specifications
- Type: digital amp for acoustic-electric guitar and vocals, two channels
- Power output: 100 W into 4 Ω
- Speakers: 1 × 8-inch low-frequency driver and 1 × compression tweeter, 4 Ω system
- EQ and controls: ±12 dB at 80 Hz, 700 Hz, and 5 kHz on each channel, plus independent volume, effect level, and polarity controls
- Effects per channel: Room reverb, Hall reverb, Echo, Delay, Chorus, Vibratone, Delay + Chorus, and Delay + Reverb
- Channel inputs: 2 × XLR / 6.35 mm combo jacks. 16 V phantom power on XLR. Input impedance 4.7 MΩ instrument, 18.2 kΩ microphone
- AUX and headphones: 3.5 mm stereo AUX (18 kΩ), 3.5 mm stereo headphone output (140 mW per channel into 16 Ω). Connecting headphones mutes the speakers
- Line outputs: 2 × balanced XLR, stereo or mono with summed or separate channels. Ground Lift, 600 Ω, +4 dBu nominal, +19.8 dBu maximum
- USB recording: micro-USB to a computer
- Footswitch jack: 6.35 mm for optional four-button MGT-4, part number 0994071000
- Power: 230 V, 50 Hz (EU version), IEC power inlet and built-in rechargeable lithium-ion battery
- Cabinet: lightweight plywood with brown vinyl, top handle, and tilt-back kickstand
- Dimensions (W × H × D): 39.9 × 30.5 × 23.9 cm
- Weight: 7.7 kg
Fender advises against connecting ribbon microphones to the XLR inputs because they supply phantom power.
What’s Included
- 1 × Fender Acoustic Junior GO Acoustic Guitar Amplifier
- Regional IEC power cord
- Magnetic control overlay for the MGT-4 footswitch
The MGT-4 footswitch and micro-USB cable are not included.
Who Is It For
For solo acoustic sets and duos that want one amp for guitar and voice or two instruments. Use it as the sound source in a small room or connect it to the venue’s PA.
Can’t find the Fender product you are looking for?
Contact us: info@stageiq.lt or +370 636 55536.




