FBT X-PRO 110A Active Speaker

FBT X-PRO 110A Active Speaker

FBT X-PRO 110A is a 2-way active loudspeaker.

Separate Class D amplifiers power the low- and high-frequency drivers. It suits portable and fixed sound systems and can also be used as a floor stage monitor.

A 15 mm birch plywood cabinet with internal reinforcement has a scratch-resistant coating. Steel front grilles protect the drivers. The finish is black.

The built-in 3-channel mixer provides independent source level controls. CH1 and CH2 have XLR inputs with MIC/LINE switches for microphones or line-level signals. CH2 also provides two 6.3 mm L/mono and R sockets for a keyboard or another stereo source.

The third channel receives Bluetooth 5.0 audio from a phone or tablet, with volume also controllable from the source device. A single speaker also works with older Bluetooth devices.

Main Features

• 4 DSP presets: ORIGINAL / LIVE for live sound, FLOOR / VOCAL for monitoring and speech, and CLUB or DJ for music playback.
• DSP adjusts frequency response and dynamic processing; low-frequency dynamic EQ and energy control vary with the selected preset.
• The HPF attenuates signals below approximately 100 Hz at 18 dB/oct, for use with a separate subwoofer.
• Balanced XLR OUT: MIX carries the sum of channels 1, 2 and 3; LINK passes the direct CH1 input signal to another speaker or device.
• An 80° × 50° rotatable constant-directivity horn allows coverage to be adapted when using the speaker in a horizontal position.
• The cabinet can be placed on the floor as a stage monitor at 35°.
• 4 M10 rigging points and a 35 mm stand socket support suspended or stand-mounted installations. Built-in handles assist transport.
• A variable-speed fan cools the amplifier. The PRT/LMT indicator shows limiter activity and protection against overheating or overload.

Simultaneous playback through two speakers requires an Android source with Bluetooth 5.0 or later and simultaneous audio streaming to two devices. Bluetooth version alone is insufficient. Both speakers reproduce the same summed L+R mono signal. Pair them again after power-off.

Technical Specifications

• Drivers: 1 × 10-inch LF with a 2.5-inch voice coil; 1 × 1-inch HF compression driver with a 1.4-inch voice coil
• Maximum Amplifier Power (LF / HF): 1200 / 300 W
• Frequency Response: 58 Hz - 20 kHz (−6 dB)
• Maximum SPL, Continuous / Peak: 123 / 127 dB
• Input Impedance: 22 kΩ
• Power Supply: 100–240 V AC, 50/60 Hz; switch-mode supply, IEC mains inlet
• Power Consumption: 500 W
• Power Cable Length: 5 m
• Dimensions (W × H × D): 314 × 550 × 315 mm
• Weight: 14.6 kg

What’s Included

• 1 × FBT X-PRO 110A active speaker
• Region-appropriate 5 m power cable

The XP-UH 10 horizontal wall bracket and XP-C 10 protective cover are optional accessories, sold separately.

Other compatible optional accessories are the WMA 560BK wall bracket and FMS 220BK, MSA 220BKS or MSA 300BK stands.

Suspended installation must be carried out by qualified personnel using original FBT accessories. Do not suspend the speaker by its handles.

Who Is It For

For live music and speech, mobile DJs, theatres, conference rooms and fixed installations.

Can’t find the FBT product you are looking for?

Contact us: info@stageiq.lt or +370 636 55536.