FBT TALOS 20K4 T Power Amplifier

FBT TALOS 20K4 T Power Amplifier

FBT TALOS 20K4 T is a 4-channel Class D power amplifier.

Total rated output is 20,000 W RMS. The 40-bit DSP operates at 96 kHz and manages passive PA loudspeakers, subwoofers and line arrays.

System Engineer controls the amplifier over Ethernet TCP/IP. DHCP, static IP and Auto-IP support direct computer connections.

Dante is not fitted to the T version. Sources connect through 4 balanced analogue XLR inputs with LINK or the AES3 digital input.

Main Features

• LIR linear-phase and Hardman crossover filters, plus FIR high-frequency shelving EQ, shape loudspeaker response.
• VX protects passive two-way loudspeakers. Tmax manages thermal load, Xmax uses a sliding HPF for excursion control, and a peak limiter handles transients.
• Drive Modules and Component Presets organize processing around loudspeaker components. There are 12 independent overlays of EQ, Delay and Gain for group adjustments.
• EBP limits mains current draw according to the selected external breaker rating.
• A graphical display, 2 encoders and illuminated buttons provide local control. A panel lock is available; Snapshot recall works locally, in software or via AUX.
• AUX contact inputs recall settings and mute the system. A fault relay communicates status to external control equipment.
• Standby and Deep Sleep have automatic timers. Wake-up is possible through the front panel, network, contact input or audio detection.
• System Engineer logs up to 3 days of operation, including current, voltage, driver impedance, thermal capacity and protection activity, with diagnostic export.

Variable-speed fans provide front-to-back airflow through washable filters. The 19-inch, 2U chassis requires rear support in a mobile rack; the ZA1182 kit is sold separately.

Technical Specifications

• RMS Power per Channel (2 / 4 / 8 Ω): 5000 / 3000 / 1500 W; crest factors 12 / 9 / 6 dB; all channels, continuous program material, 40 °C
• Bridged RMS Power: 10,000 W per channel pair, 4 Ω
• 25 / 70 / 100 V Line Power per Channel: 1250 / 3500 / 5000 W RMS, crest factor 12 dB
• Frequency Response: 5 Hz - 20 kHz (±0.5 dB, 4 Ω); <3 Hz to >30 kHz (−2.5 dB, 4 Ω)
• Dynamic Range, Analogue / AES3 Input: >113 / 114 dB (A-weighted)
• THD: <0.05% typical (1 kHz, AES17, 4 Ω)
• Inter-Channel Crosstalk: better than −85 dBr at 1 kHz and −75 dBr at 10 kHz
• Analogue Inputs: 20 kΩ, maximum level +20 dBu, full-output sensitivity 0–20 dBu
• AES3: 24–192 kHz, transformer-isolated input, regenerated LINK with automatic direct bypass when unpowered
• DSP Latency: 1.53 ms without LIR / FIR filters; filters can increase latency, LIR up to 30 ms; input and output latency is additional
• Loudspeaker and Mains Connectors: Neutrik Speakon, 32 A PowerCON
• Power Supply: 85–240 V AC, 47–63 Hz, switch-mode
• Maximum Ambient Temperature at Full Power: 40 °C
• Dimensions (W × H × Depth behind rack ears): 482 × 88 × 360 mm; front projection 37 mm
• Weight: 12.5 kg

What’s Included

• 1 × FBT TALOS 20K4 T power amplifier

Rear support and signal cables are selected separately to suit the system configuration.

Who Is It For

For touring PA, line arrays and fixed sound systems requiring high output, centralized loudspeaker processing and monitoring.

Can’t find the FBT product you are looking for?

Contact us: info@stageiq.lt or +370 636 55536.