FBT STAGEMAXX 12MA W Active Loudspeaker, White

FBT STAGEMAXX 12MA W Active Loudspeaker, White

The FBT STAGEMAXX 12MA W is a two-way active loudspeaker designed for use as a stage monitor. This version has a white enclosure.

A 12-inch LF driver and a 1-inch compression driver share a coaxial axis and provide 90° conical coverage. The enclosure can be placed on the floor at a 35° or 55° monitoring angle.

Separate Class D amplifier sections drive the two speakers. FBT specifies 350 / 80 W RMS continuous and 400 / 100 W RMS MAX power; peak SPL reaches 130 dB. The built-in DSP has four EQ presets for floor monitoring and front-of-house use.

The rear panel provides an XLR signal input, an XLR link output, level control and a high-pass filter. The polypropylene enclosure has three integrated handles and two M10 mounting points; mounting accessories are sold separately.

Main Features

• The coaxial driver layout provides symmetrical 90° conical dispersion.
• The 35° and 55° cabinet positions aim sound at one performer or a wider stage area.
• Four DSP presets cover floor monitoring, reduced high or low frequencies, and FOH operation.
• The XLR link output passes the input signal to another active loudspeaker.
• The high-pass filter supports integration with a subwoofer system.
• Three integrated handles make the monitor easier to lift and carry.
• Two M10 points support installation with suitable optional mounting hardware.
• The steel front grille protects the coaxial drivers.

Technical Specifications

• Manufacturer code: 36712
• Colour: white
• System: two-way active loudspeaker, bass reflex
• LF driver: 12 in B&C, 2.5 in voice coil
• HF driver: 1 in B&C, 1.7 in voice coil
• Continuous amplifier power: 350 / 80 W RMS
• MAX amplifier power: 400 / 100 W RMS
• Peak amplifier power: 800 / 200 W
• Frequency response: 60–20,000 Hz (-6 dB)
• Maximum SPL: 124 dB continuous / 130 dB peak
• Dispersion: 90° conical
• Crossover frequency: 1.8 kHz
• DSP: 4 EQ presets
• Connections: XLR input and XLR link output
• Input impedance: 22 kΩ
• Controls: level, DSP preset selection, high-pass filter
• Floor monitor angles: 35° and 55°
• Mounting: 2 M10 points
• AC power requirement: 450 VA
• Power cord length: 5 m
• Enclosure: polypropylene, steel front grille
• Dimensions (W × H × D): 550 × 289 × 392 mm
• Product net weight: 14.6 kg

What’s Included

• 1 × FBT STAGEMAXX 12MA W active stage monitor
• 1 × power cable

Who Is It For

Suitable for stage monitoring at concerts and in theatres. With its FOH DSP preset and suitable optional mounting hardware, it can also serve in main or installed sound systems.

Can’t find the FBT product you are looking for?

Contact us: info@stageiq.lt or +370 636 55536.