FBT MIURA 8008I Power Amplifier

FBT MIURA 8008I Power Amplifier

FBT MIURA 8008I is an 8-channel Class D power amplifier with integrated DSP.

It drives low-impedance passive loudspeakers or 70 / 100 V lines. The chassis fits a standard 19-inch equipment rack.

Asymmetric loading enables power distribution according to channel demand. The switch-mode supply with PFC manages mains current and supports sustained peak output.

INFINITO for Windows provides DSP control and signal routing, groups and scenes, sensor and level monitoring, global mute and device firmware updates.

Main Features

• Dante: 4 inputs and 4 outputs, 24-bit audio at 48–96 kHz.
• 2 × EtherCON network ports support TCP/IP, AES70 control and daisy-chain connections.
• OLED display with push encoder: channel levels, sources, MUTE, speaker presets, SNAPSHOT, IP settings and menu lock.
• 4 balanced analogue inputs, 8 amplifier outputs and AES3 with LINK use screw-terminal Euroblock connectors.
• Separate RJ45 IN/OUT ports relay the four analogue channels to another amplifier. These are distinct from the Ethernet ports.
• 8 GPIO channels can act as analogue or digital inputs or digital outputs; fault relay contacts are provided.
• Auto-Standby and Auto-Wake reduce idle use when enabled and resume operation when an input signal returns.

Cooling uses a variable-speed fan with front-to-rear airflow. Allow at least 60 × 330 mm behind the amplifier and 100 mm above the rack. Secure the rear in mobile racks.

SE operates individual channels. Configure BTL, PTL and PBTL in INFINITO on a Windows PC before wiring. Minimum loads: BTL 8 Ω, PTL 2 Ω, PBTL 4 Ω. PTL and PBTL require copper jumpers of at least 1.5 mm².

Technical Specifications

• Power, all channels driven (4 / 8 / 16 Ω): 8 × 1000 / 750 / 600 W
• Power, one channel driven (4 / 8 / 16 Ω): 1500 / 1200 / 600 W
• 70 V / 100 V line power: 8 × 900 W / 4 × 2000 W (BTL)
• Maximum unloaded voltage (SE / BTL): 140 / 280 Vp
• Frequency Response: 20 Hz - 20 kHz (−0.5 dB, 3 dB below rated power)
• Signal-to-Noise Ratio: >106 dB (A-weighted)
• THD+N: <0.05% (20 Hz - 20 kHz, 8 Ω, 3 dB below rated power)
• Protection: short circuit, DC, undervoltage, temperature and overload
• Power Supply: 100–240 V AC, 50/60 Hz, switch-mode with PFC
• Consumption (standby / idle / 1/8 power): 19 / 50 / 1350 W
• Operating Temperature: 0–40 °C
• Chassis Dimensions (W × H × D): 482 × 88 × 485 mm, 2U
• Weight: 9 kg

What’s Included

• 1 × FBT MIURA 8008I power amplifier
• 1 × input connector block
• 2 × output connector blocks
• 2 × GPIO connectors
• 2 × AES connectors
• 1 × power cable

For EU use, the supplied power cable connector must be adapted to local requirements by qualified personnel.

Who Is It For

For fixed sound systems in theatres, conference rooms, clubs, pubs and gyms requiring network control.

Can’t find the FBT product you are looking for?

Contact us: info@stageiq.lt or +370 636 55536.