DPA 2017 Microphone

Shotgun Microphone for Long Distance
Directional pattern: Supercardioid @1 kHz
Operating principle: Pressure gradient
Capsule type: Pre-polarized condenser
Frequency range: 20 Hz - 20 kHz
Effective frequency range, ±2 dB, at 60 cm: 70 Hz to 18 kHz,
with typical 2 dB soft boost at 15 kHz
Sensitivity, nominal, ±2 dB at 1 kHz: 25 mV/Pa; -32 dB / 1 V/pa
Equivalent noise level, A-weighted: typical 13 dB(A) / 20 µPa (max. 15 dB(A))
Distortion, THD < 1%: 140 dB SPL, 143 dB SPL peak
Dynamic range: typical 130 dB
Max. SPL, THD 10%: 148 dB SPL peak
Nominal output impedance: 60 ohms
Minimum load impedance: 2 ohms
Cable drive capability: 100 m
Output balancing principle: Impedance balancing with active drive
Common Mode Rejection Ratio (CMRR): > 60 dB
Power supply (for full performance): P48 (Phantom Power)
Current consumption: 1.8 mA
Connector: XLR-3M. Pin 1: screen, Pin 2: signal + phase, Pin 3: - phase
Weight: 115 g
Microphone diameter: 19 mm
Capsule diameter: 17 mm
Microphone length: 184 mm
Maximum output voltage, RMS: 8.7 V (21 dBu)
Polarity: +V at pin 2 for positive sound pressure
Temperature range: -40°C to 45°C
Relative Humidity (RH): up to 90%
Colour: Black