Blackstar St. James 50 EL34H Guitar Amplifier
Pay in instalments with ESTO
Couldn't load pickup availability
Description
Description
Blackstar St. James 50 EL34H Guitar Amplifier
The 50-watt valve power stage offers full-power, 2-watt and Sag settings. Sag reduces clean headroom and softens the attack through dynamic power-supply compression, giving a more vintage response.
Channel I has a mid-1960s American Clean voice with solid lows and controlled mids, while Channel II covers British clean and crunch tones. Its Boost switch adds 10 dB at the input to drive the preamp harder. On this EL34 model, Channel II also has an active Middle control for midrange cut and boost.
CabRig processes the signal after the power valves and output transformer. Architect software provides two virtual cabinets, microphone choices, EQ and room settings. Three stored configurations can be recalled from the rear panel, with direct XLR and headphone outputs for recording or sending the sound to a PA without a cabinet microphone.
The Fawn candlenut-plywood enclosure weighs 6.7 kg. This is a separate amplifier head with no built-in speaker, designed to drive a compatible guitar cabinet.
Main Features
- One set of Bass, Middle and Treble knobs operates electrically independent EQ circuits for the two channels.
- Digital reverb and a Series effects loop with a +4 dBu / −10 dBV level switch.
- STBY 0 disconnects the speaker outputs and engages the internal reactive load, allowing silent CabRig use without an external speaker load.
- USB-B carries 4 simultaneous audio channels: 1–2 provide the complete stereo CabRig mix, while 3–4 carry CAB 1 and CAB 2 cabinet-and-microphone signals without EQ, mix controls or room processing.
- CabRig DI mode sends the power-stage signal to external IR processing. Cabinet and microphone simulation runs inside the amplifier, so saved configurations work without a connected computer.
- The supplied FS-19 footswitch selects the channel and Channel II Boost. Connecting it overrides the corresponding front-panel switches.
- The front Blackstar logo is illuminated when the amplifier is powered on.
Technical Specifications
- Design: All-valve head without a built-in speaker
- Power: 50 W RMS
- Power Modes: 50 W, Sag, 2 W
- Preamp Valves: 2 × ECC83
- Power Valves: 2 × EL34
- Channels: 2; Clean and British crunch with 10 dB Boost
- Controls: Volume I, Gain II, Volume II, Bass, Middle, Treble, Reverb, Master, channel and Boost switches, power-mode, STBY and mains switches
- Instrument Input: 6.35 mm
- Speaker Loads: 1 × 16 Ω or 1 × 8 Ω or 2 × 16 Ω
- CabRig Outputs: Balanced mono XLR and 6.35 mm TRS stereo Line Out / headphones
- USB: USB-B, 4 audio channels; PC and Mac, no specific drivers required
- CabRig Editing: Architect; 23 cabinet models, 6 microphone types, dual-cabinet EQ and room settings
- Effects Loop: Series, Send / Return, +4 dBu / −10 dBV
- Master: Controls speaker, XLR, Line Out / headphone and USB output levels
- CabRig Microphones and Room: On-axis / off-axis; Small / Medium / Large rooms, Mono / Stereo / Wide width
- CabRig EQ: 120 Hz, 400 Hz, 1 kHz and 4 kHz bands, ±10 dB; Low-Cut and Hi-Cut filters
- Enclosure: Candlenut plywood, Fawn finish
- Dimensions (W × H × D): 402 × 222 × 214 mm
- Weight: 6.7 kg
- Mains Supply: 100–240 V AC, 50/60 Hz
Do not use the separate 16 Ω and 8 Ω socket groups simultaneously. When disconnecting a cabinet, remove the cable at the amplifier end: the protection system senses connections at the amplifier output sockets.
What’s Included
- Blackstar St. James 50 EL34H Guitar Amplifier
- FS-19 footswitch
- Detachable mains cable
USB-B cable is not included. A guitar cabinet is available separately.
Who Is It For
For live use with a cabinet, direct CabRig recording and silent headphone practice. The 2 W mode reduces output power, while 50 W mode provides the greatest clean headroom.
Can’t find the Blackstar product you are looking for?
Contact us: info@stageiq.lt or +370 636 55536.





