Blackstar JJN 50 Guitar Amplifier
Pay in instalments with ESTO
Couldn't load pickup availability
Description
Description
Blackstar JJN 50 Guitar Amplifier
A 50 W RMS power stage with two EL34 valves and a cabinet weighing just 7.7 kg combine valve tone with portability. Developed with Jared James Nichols, the JJN 50 is a guitar amplifier head without a built-in speaker.
Channel I draws on mid-1960s American clean tones, with bright highs, solid lows and controlled mids. Channel II has early-1960s British character, ranging from warm cleans to responsive crunch.
Channel II’s BLUES POWER circuit adds a 10 dB clean boost before the valve preamp. It drives the preamp harder while retaining the channel’s basic character. This channel runs the power stage open loop for a looser, more resonant response.
An internal reactive load and CabRig support recording or headphone playing without a cabinet. STBY 0 disconnects the speaker outputs and routes the valve power-stage signal into the internal load.
Main Features
- Use 50 W for greater clean headroom or 2 W for quieter playing. Sag changes dynamic compression and attack feel, rather than selecting another fixed wattage.
- Volume I, Gain II and Volume II balance the channels. Bass, Middle and Treble operate independent circuits tailored to each channel through shared knobs; Channel II has active mid cut and boost.
- Reverb sets the reverb level. Master affects every output, including XLR, headphones and USB, because CabRig receives the signal after the real valve power stage.
- Select three stored CabRig settings on the rear panel, with Jared’s own choices preloaded. Architect edits cabinet, microphone and room settings and blends two virtual cabinet channels.
- The included FS-19 footswitch selects Channel I / Channel II and BLUES POWER. Connecting it disables the corresponding panel switches, while the indicators continue to show their status.
Technical Specifications
- Power: 50 W RMS; 50 W / Sag / 2 W settings
- Valves: 2 × ECC83 preamp, 2 × EL34 power valves
- Channels: Channel I, Channel II with 10 dB BLUES POWER boost
- Speaker Loads: 1 × 16 Ω on its own socket, or 1 × 8 Ω / 2 × 16 Ω on the other socket group
- Effects Loop: Mono Send / Return; +4 dBu / −10 dBV level switch
- CabRig Outputs: Balanced mono XLR and 6.35 mm TRS stereo Line Out / Phones
- USB-B Recording: 4 channels: 1–2 main CabRig stereo mix, 3 CAB 1 cabinet and microphone, 4 CAB 2; channels 3–4 have no EQ, mix or room processing
- Finish: British Racing Green covering, biscuit grille cloth and illuminated Blackstar logo
- Dimensions (W × H × D): 495 × 241 × 228 mm
- Weight: 7.7 kg
- Power Supply: 100–240 V AC, 50/60 Hz
Do not use the separate 16 Ω output together with the 8 Ω / 2 × 16 Ω group. Protection senses the amplifier’s output sockets: disconnect the speaker cable at the amplifier for silent recording, rather than only at the cabinet. With no cable in the guitar input, the amplifier enters a silent low-consumption mode.
USB uses standard computer audio drivers; no specific driver is required. CAB 1 and CAB 2 recording channels are not simply the dry guitar input.
What’s Included
- Blackstar JJN 50 Guitar Amplifier
- FS-19 two-button footswitch
- Region-appropriate mains cable
The USB-B cable is not included. A guitar cabinet is selected separately.
Who Is It For
For blues and rock guitarists who value touch response and a lighter head to carry. Both channels work as pedal platforms, while the reactive load and CabRig bring the same valve amplifier into silent recording setups.
Can’t find the Blackstar product you are looking for?
Contact us: info@stageiq.lt or +370 636 55536.





