Blackstar DA100 Ruby Guitar Amplifier
Pay in instalments with ESTO
Couldn't load pickup availability
Description
Description
Blackstar DA100 Ruby Guitar Amplifier
Developed with Doug Aldrich, the 100 W RMS valve head uses four EL34 output valves. Three channels and six voices cover clean sounds through to high-gain rock tones, housed in a Ruby red enclosure.
The Clean channel offers a bright American voice with a firm low end or a more responsive British voice with warmer mids. OD 1 and OD 2 have independent Gain and Volume controls with shared Bass, Middle, Treble and ISF. Doug’s hot-rodded Plexi character and revised midrange distinguish this design from the standard HT Venue range.
The FS-14-DA selects channels and voices, engages a 4 dB boost and switches the effects loop. Each channel recalls its last selected Voice. Architect can reassign the Boost or Loop button to Reverb. Adjustable effects loop tails preserve the repeats of external delay effects after the loop is switched off.
CabRig includes three presets developed with Doug: Doug’s Ruby Reds, Doug’s Classic Cabs and Doug’s L.A. Studio. Free Architect software provides two virtual cabinet and microphone combinations, EQ, mic axis, room and stereo-width editing. Power Amp Drive adjusts the virtual power stage; the physical Master control does not change the CabRig outputs.
USB-C carries 4 simultaneous recording channels: stereo CabRig left and right, preamp output and dry guitar. A stereo return from the computer plays through the CabRig outputs. XLR and Line Out / Phones stay active in Standby for silent recording and practice with headphones.
Main Features
- 100 W / 10 W modes bring power-stage drive to lower-volume applications.
- ISF shifts the EQ between American and British responses; reducing guitar volume cleans up the overdrive.
- Dark reverb uses a Room character and Light uses Plate. Architect allows separate reverb decay settings for each channel.
- The series Send / Return effects loop has selectable +4 dBu / −10 dBV operating levels for external effects.
- Presence and Resonance adjust the overall high- and low-frequency response. The 2-Way TRS socket also supports external switching.
Technical Specifications
- Output power: 100 W RMS; 10 W reduced-power mode
- Valves: 2 × ECC83, 4 × EL34
- Channels: Clean, OD 1, OD 2; 2 Voice settings each
- Clean controls: Volume, Bass, Treble, Voice
- Overdrive controls: independent Gain, Volume and Voice; shared Bass, Middle, Treble, ISF
- Master controls: Reverb, Resonance, Presence, Master Volume, Standby
- Speaker connections: 1 × 16 Ω; 1 × 8 Ω or 2 × 16 Ω; 1 × 4 Ω or 2 × 8 Ω
- CabRig outputs: balanced mono XLR, 6.35 mm TRS stereo Line Out / Phones, USB-C
- Footswitch connections: 5-Way FS-14-DA and 2-Way FS-15 / TRS
- Weight: 17.8 kg
- Dimensions (W × H × D): 591 × 245 × 225 mm
- Power supply: AC mains matching the voltage and frequency stated on the rear panel
Do not use different speaker output groups together. An active power stage requires a guitar cabinet with a suitable power rating and impedance. When feeding Return without using the preamp, Input must still be occupied or the power stage enters standby.
The amplifier can be adapted for 6L6 valves, but valve replacement and re-biasing must be carried out by qualified service personnel.
What’s Included
- 1 × Blackstar DA100 Ruby Guitar Amplifier
- FS-14-DA five-button footcontroller
- Footcontroller cable
- Region-appropriate mains cable
A guitar cabinet, optional FS-15 and USB-C cable are not included.
Who Is It For
For rehearsals, live performance and direct recording when three valve channels and footswitchable effects loop control are required. Playing through speakers requires a separate, correctly matched guitar cabinet.
Can’t find the Blackstar product you are looking for?
Contact us: info@stageiq.lt or +370 636 55536.





