Blackstar HT-5RH MKIII Guitar Amplifier
Pay in instalments with ESTO
Couldn't load pickup availability
Description
Description
Blackstar HT-5RH MKIII Guitar Amplifier
The 5 W RMS valve power stage uses a 12BH7 in a push-pull circuit. With no built-in speaker, this head needs a separate guitar cabinet with a matched impedance for amplified sound. Reducing the output to 0.5 W allows power-stage saturation at a lower volume.
The American Clean voice is bright with a tight bass response. Its British alternative brings warmer mids, looser bass and a more dynamic response. A dedicated Tone control adjusts the balance of bass and treble together on the Clean channel.
Overdrive offers a classic hot-rodded sound or a modern voice with extra midrange boost. Gain and OD Volume balance saturation and level, while Bass, Middle, Treble and ISF shape the response between American and British characters. Rolling back the guitar volume reduces the overdrive.
CabRig models the power stage, speaker, cabinet, microphone and room. Free Architect software edits the simulation, stores 3 presets and adjusts reverb decay separately for the Clean and OD channels. USB-C captures a 2-channel stereo guitar signal with CabRig and reverb in recording software.
Stereo Line In accepts a phone or music player for playing along. Its signal stays stereo at Line Out / Phones and is summed to mono at the other outputs. Clean Volume and OD Volume balance the two channel levels.
Main Features
- A balanced XLR CabRig output feeds a mixing desk, while the 6.35 mm TRS unbalanced stereo Line Out / Phones connection suits headphones and recording equipment.
- The serial Send / Return effects loop offers selectable +4 dBu / −10 dBV levels for external effects.
- The included FS-16 footswitch selects Clean, Overdrive and their Voice settings. It disables the front-panel channel and Voice switches; external switching is also supported through the TRS socket.
- With no speaker cabinet connected, the power stage automatically enters standby while CabRig stays active for silent headphone use and recording. Leaving the Input socket unused also enables standby.
Technical Specifications
- Output Power: 5 W RMS; 0.5 W reduced-power mode
- Valves: 1 × ECC83 preamp valve, 1 × 12BH7 power valve
- Channels and Voices: Clean and Overdrive, each with 2 Voice settings; 4 in total
- Clean Controls: Volume, Voice, Tone
- Overdrive Controls: Gain, Voice, Volume, Bass, Middle, Treble, ISF
- Global Controls: Reverb, 5 W / 0.5 W and Power switches
- Speaker Outputs: 1 × 16 Ω; 1 × 8 Ω or 2 × 16 Ω
- Audio Connections: 6.35 mm guitar input; XLR CabRig; 6.35 mm TRS Line Out / Phones; 3.5 mm stereo Line In; Send / Return
- USB and Footswitch: USB-C stereo recording and Architect; 6.35 mm TRS FS-16 / FS-22 socket
- Colour: Black
- Weight: 6.8 kg
- Dimensions (W × H × D): 396 × 217.5 × 220 mm
- Power Supply: Mains electricity at the voltage and frequency marked on the rear panel
Connect a 16 Ω cabinet to the 1 × 16 Ω output. Use the 1 × 8 Ω or 2 × 16 Ω group for one 8 Ω cabinet or two 16 Ω cabinets. Do not use different impedance output groups at the same time. A matched speaker load is required whenever the power stage is operating.
Windows requires the Blackstar USB Audio Driver; additional drivers are not required on macOS.
What’s Included
- 1 × Blackstar HT-5RH MKIII Guitar Amplifier
- FS-16 two-button footswitch
- Region-appropriate mains cable
The USB-C cable and optional FS-22 footswitch are not included. A guitar cabinet is sold separately.
Who Is It For
For practice, rehearsals and direct recording when you want to choose a separate guitar cabinet and need Clean and Overdrive channels with an effects loop. The 0.5 W setting suits lower-volume playing, while CabRig supports recording and headphones without a connected cabinet.
Can’t find the Blackstar product you are looking for?
Contact us: info@stageiq.lt or +370 636 55536.





