Blackstar Dept. 10 AMPED 3 Guitar Amplifier
Pay in instalments with ESTO
Couldn't load pickup availability
Description
Description
Blackstar Dept. 10 AMPED 3 Guitar Amplifier
Three channels, six amp voices and a 100 W power stage fit into a pedal-format enclosure. AMPED 3 covers clean sounds, driven rhythm tones and high-gain leads in one amplifier.
The Clean channel offers Clean Warm and Clean Bright, Crunch provides Crunch and Super Crunch, and Overdrive has OD 1 and OD 2 voices. Bass, Middle and Treble work with ISF to move between American and British EQ characteristics.
In Patch mode, three channel footswitches recall stored settings. Manual mode follows the physical controls instead. EL84, EL34 and 6L6 Response options change power-stage dynamics and break-up.
Place Boost before the preamp for extra saturation, or after it for a solo level increase. Dark and Light reverb voices have a dedicated footswitch; holding it activates Freeze to extend the decay.
CabRig offers 23 cabinet and 6 microphone models through the free Architect software, with mic-axis selection, room ambience, stereo width and EQ. Three CabRig presets can be stored in the amplifier.
USB-C provides 4 recording channels: CabRig left and right, the preamp output and a dry guitar signal. Stereo playback from the computer can be monitored through the CabRig outputs.
Main Features
- Pre Boost adds up to 12 dB and Post Boost up to 6 dB. Boost level and position are saved with a patch, while its on/off state remains global.
- Reverb time and tone can be refined in Architect. Presence adjusts the high-frequency character of the power-stage response.
- The effects loop has a +4 dBu / −10 dBV level switch. Architect selects series or parallel operation and its position relative to reverb.
- MIDI In and Thru support amplifier control and pass incoming MIDI commands to other devices.
Technical Specifications
- Output Power: 100 W RMS; selectable 100 W, 20 W or 1 W
- Channels / Voices: 3 / 6
- Controls: Gain, Bass, Middle, Treble, ISF, Channel Volume, Boost, Reverb, Presence, Master
- Instrument Input / Out: 6.35 mm input and output to another amplifier
- Speaker Outputs: 8 Ω or 16 Ω; use one output only
- Effects Loop: separate 6.35 mm Send and Return
- CabRig Outputs: balanced mono XLR, 6.35 mm TRS stereo Line Out / Headphones, USB-C
- MIDI: 3.5 mm TRS MIDI In and Thru
- Pedal Power: 2 × 9 V DC outputs, 500 mA maximum combined current; isolated, centre negative
- Power Supply: 100–240 V AC, 50/60 Hz
- Color: black
- Weight: 1.98 kg
- Dimensions (W × H × D): 285 × 80 × 150 mm
CabRig Level attenuates the XLR, Line Out and third USB recording channel by up to 20 dB.
The Out signal is taken after Presence and Master, without Response power-stage modelling.
Connect one 8 Ω or 16 Ω cabinet to the matching output only. Never use both speaker outputs together. For recording without a cabinet, remove the speaker cable at the amplifier end so that its load protection can operate.
What’s Included
- 1 × Blackstar Dept. 10 AMPED 3 Guitar Amplifier
- Region-appropriate mains cable
- USB-C cable
- TRS to 5-pin MIDI adapter
Who Is It For
For guitarists who need three footswitch-recallable sounds and an independent solo Boost. Use a matching speaker cabinet on stage, or CabRig for direct-to-mixer performances and recording.
Can’t find the Blackstar product you are looking for?
Contact us: info@stageiq.lt or +370 636 55536.





