Blackstar Dept. 10 AMPED 2 Guitar Amplifier
Pay in instalments with ESTO
Couldn't load pickup availability
Description
Description
Blackstar Dept. 10 AMPED 2 Guitar Amplifier
A 100 W amplifier and four effects sections share one pedal-format enclosure. AMPED 2 can drive a guitar cabinet, feed a mixer directly and act as a USB audio interface.
USA, UK and Classic preamp voices cover bright American cleans, British Class A character and a more saturated British sound for chords and rhythm playing. EL84, EL34 and 6L6 Response settings change the simulated power stage’s dynamics and compression.
Drive, Modulation, Delay and Reverb each have a dedicated footswitch. Tap sets the delay tempo and can also synchronise modulation. An OLED display provides a chromatic tuner that mutes the output while active.
CabRig offers 23 cabinet and 6 microphone models through the free Architect software, with mic-axis selection, room ambience, stereo width and EQ. Three CabRig presets can be stored in the amplifier.
USB-C provides 4 recording channels: CabRig left and right, the preamp output and a dry guitar signal. Stereo playback from the computer can be monitored through the CabRig outputs.
Main Features
- Drive offers Boost, Drive and Fuzz. Modulation covers Chorus/Flanger, Tremolo and Phaser, including standard and harmonic Tremolo.
- Delay types are Linear, Analogue and Shimmer; Reverb offers Room, Spring and Plate. Holding Delay or Reverb activates Freeze, while holding Modulation adds an Emphasis effect.
- Hold: Shift accesses Fuzz Bias, rhythmic subdivisions and Presence. Architect edits pre/post routing for modulation and delay, delay trails and effects-loop settings.
- Complete amp settings saved as local Architect patches remain on the computer and require the software to load them. AMPED 2 does not store these as footswitch-recallable amp presets.
Technical Specifications
- Output Power: 100 W RMS; selectable 100 W, 20 W or 1 W
- Preamp Voices: USA, UK, Classic
- Response: EL84, EL34, 6L6
- Main Controls: Gain, Bass, Middle, Treble, Master; effect level and character controls
- Instrument Input / Out: 6.35 mm input and output to another amplifier
- Speaker Outputs: 8 Ω or 16 Ω; use one output only
- Effects Loop: 6.35 mm Send and Return; +4 dBu / −10 dBV, series or parallel
- CabRig Outputs: balanced mono XLR, 6.35 mm TRS stereo Line Out / Headphones, USB-C
- MIDI: 3.5 mm TRS MIDI In and Thru
- Pedal Power: 2 × 9 V DC outputs, 500 mA maximum combined current; isolated, centre negative
- Power Supply: 100–240 V AC, 50/60 Hz
- Color: red
- Weight: 1.76 kg
- Dimensions (W × H × D): 285 × 80 × 150 mm
CabRig Level attenuates the XLR, Line Out and third USB recording channel by up to 20 dB.
The Out signal is taken after Presence and Master, without Response power-stage modelling.
Connect one 8 Ω or 16 Ω cabinet to the matching output only. Never use both speaker outputs together. For recording without a cabinet, remove the speaker cable at the amplifier end so that its load protection can operate.
What’s Included
- 1 × Blackstar Dept. 10 AMPED 2 Guitar Amplifier
- Region-appropriate mains cable
- USB-C cable
- TRS to 5-pin MIDI adapter
Who Is It For
For live and rehearsal setups that need amplification, essential effects and a tuner in one unit. Dedicated footswitches make individual effects accessible during a performance, while CabRig and USB carry the same sounds into direct recording.
Can’t find the Blackstar product you are looking for?
Contact us: info@stageiq.lt or +370 636 55536.





