DPA 4017ES Shotgun Microphone

DPA 4017ES Shotgun Microphone

DPA 4017ES is a condenser shotgun microphone with an active cable.

Its interference design focuses pickup toward a chosen source. It suits film or broadcast recording where sound from the sides must be reduced.

The 3 m cable exits from the side of the capsule interface and can run along a nearby surface. The 4017ER has rear entry instead.

A 3-pin XLR connector at the cable end carries P48 phantom power. DPA specifies a 125 mm microphone section, shorter than the 4017B body, a 121 g configuration weight and a typical 13 dB(A) equivalent noise level.

Main Features

• Side cable entry routes the lead laterally when the microphone is close to a surface.
• Narrow pickup helps reduce surrounding sound during film or broadcast work.
• The active cable links the capsule to an XLR connector carrying phantom power.
• The 3 m cable provides a defined reach to audio equipment.
• The 125 mm microphone section is shorter than the 4017B body with a directly attached preamp.

Technical Specifications

• Directional Pattern: supercardioid, lobar
• Frequency Response: 20 Hz to 20 kHz
• Equivalent Noise Level: typ. 13 dB(A)
• Maximum SPL: 138 dB SPL peak at 10% THD
• Cable: 3 m, side entry
• Power: P48 phantom
• Connector: 3-pin XLR male
• Microphone Length: 125 mm
• Weight: 121 g

What’s Included

• 1 × DPA 4017ES shotgun microphone with active cable

Who Is It For

For television, film and ENG sound capture when the microphone is mounted near a surface or in a confined position and side cable routing is useful.

Can’t find the DPA product you are looking for?

Contact us: info@stageiq.lt or +370 636 55536.