{"product_id":"se-electronics-se8","title":"sE Electronics sE8 Condenser Microphone","description":"\u003ch2\u003esE Electronics sE8 Condenser Microphone\u003c\/h2\u003e\n\u003cp\u003eThe sE Electronics sE8 is a small-diaphragm cardioid true-condenser microphone for recording or reinforcing instruments, choirs and ensembles. The manufacturer recommends it for acoustic guitar, piano, strings, woodwinds, drums, percussion, cymbals and drum overheads.\u003c\/p\u003e\n\u003cp\u003eIts hand-built and individually tuned 1\/2-inch capsule uses a 3-micrometre gold-sputtered diaphragm. The cardioid polar pattern concentrates pickup at the front and reduces sound arriving from behind, allowing the microphone to be aimed precisely at the selected source. Transformerless Class A circuitry is designed for wide dynamic range and fast transient response.\u003c\/p\u003e\n\u003cp\u003eThe two-stage pad provides -10 dB and -20 dB settings, allowing close placement on loud brass, snare drum and other high-SPL sources. The 80 Hz and 160 Hz low-cut settings reduce floor vibration, rumble or excessive proximity-effect bass. An all-metal housing and gold-plated XLR connector are suited to studio and stage use. The microphone requires 48 V phantom power.\u003c\/p\u003e\n\u003ch3\u003eMain Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHand-built and individually tuned 1\/2-inch true-condenser capsule.\u003c\/li\u003e\n\u003cli\u003e3 µm gold-sputtered diaphragm for capturing fast transients.\u003c\/li\u003e\n\u003cli\u003e-10 dB and -20 dB attenuation settings for loud sources and close placement.\u003c\/li\u003e\n\u003cli\u003e80 Hz and 160 Hz, 6 dB\/octave low-cut filter settings.\u003c\/li\u003e\n\u003cli\u003eTransformerless Class A circuitry, all-metal housing and gold-plated XLR connector.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eCapsule:\u003c\/strong\u003e hand-built 1\/2-inch true condenser\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePolar pattern:\u003c\/strong\u003e cardioid\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFrequency range:\u003c\/strong\u003e 20 Hz to 20 kHz\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSensitivity:\u003c\/strong\u003e 25 mV\/Pa (-32 dBV)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMaximum SPL:\u003c\/strong\u003e 139 \/ 149 \/ 159 dB SPL, 0 \/ -10 \/ -20 dB pad, 0.5% THD at 1 kHz\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eEquivalent noise level:\u003c\/strong\u003e 13 dB\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDynamic range:\u003c\/strong\u003e 126 \/ 136 \/ 146 dB, 0 \/ -10 \/ -20 dB pad\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSignal-to-noise ratio:\u003c\/strong\u003e 81 dB\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eElectrical impedance:\u003c\/strong\u003e 110 ohms\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eRecommended load impedance:\u003c\/strong\u003e \u0026gt;1 kilohm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eLow-cut filter:\u003c\/strong\u003e 80 \/ 160 Hz, 6 dB\/octave, switchable\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAttenuation pad:\u003c\/strong\u003e -10 \/ -20 dB, switchable\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePower:\u003c\/strong\u003e 48 V phantom, 2.7 mA\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eConnector:\u003c\/strong\u003e 3-pin male XLR\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e 23 × 120 mm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 141 g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat’s Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003esE Electronics sE8 microphone\u003c\/li\u003e\n\u003cli\u003eMicrophone clip with stand thread adapter\u003c\/li\u003e\n\u003cli\u003eFoam windscreen\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho Is It For\u003c\/h3\u003e\n\u003cp\u003eThe sE8 suits detailed capture of acoustic instruments, drums, cymbals, choirs and ensembles in the studio or on stage. One microphone captures a mono signal; a stereo setup requires two microphones or the separate factory-matched Matched Pair package. A stand, an XLR cable and an input providing 48 V phantom power are required.\u003c\/p\u003e\n\u003ch3\u003eCan’t find the sE Electronics product you are looking for?\u003c\/h3\u003e\n\u003cp\u003eContact us: info@stageiq.lt or +370 636 55536.\u003c\/p\u003e","brand":"sE Electronics","offers":[{"title":"Default Title","offer_id":56192663978370,"sku":"1312880","price":185.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9736\/9730\/files\/se-electronics-se8-01_29fae05c-4d52-4b23-a629-673dcf0a6167.jpg?v=1789576912","url":"https:\/\/stageiq.lt\/en\/products\/se-electronics-se8","provider":"STAGE IQ","version":"1.0","type":"link"}