{"product_id":"se-electronics-se7","title":"sE Electronics sE7 Condenser Microphone","description":"\u003ch2\u003esE Electronics sE7 Condenser Microphone\u003c\/h2\u003e\n\u003cp\u003eThe sE Electronics sE7 is a small-diaphragm cardioid condenser microphone for recording or reinforcing instruments, choirs and ensembles. The manufacturer recommends it for acoustic guitar, piano, strings, woodwinds, drums, percussion, cymbals and drum overheads.\u003c\/p\u003e\n\u003cp\u003eIts 1\/2-inch back-electret capsule uses a thin diaphragm to capture fast changes in the source. The cardioid polar pattern concentrates pickup at the front and reduces sound arriving from behind, allowing the microphone to be aimed at a selected instrument. Discrete Class A circuitry and a transformerless output provide a short signal path.\u003c\/p\u003e\n\u003cp\u003eA switchable -20 dB pad allows close placement on loud brass or snare drum and raises maximum sound-pressure handling to 156 dB SPL. The 80 Hz low-cut filter reduces floor vibration, rumble and excessive proximity-effect bass. An all-metal housing and gold-plated XLR connector are suited to studio and stage use. The microphone requires 48 V phantom power.\u003c\/p\u003e\n\u003ch3\u003eMain Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1\/2-inch back-electret condenser capsule for instruments and ensembles.\u003c\/li\u003e\n\u003cli\u003eCardioid polar pattern helps isolate the selected sound source.\u003c\/li\u003e\n\u003cli\u003e-20 dB pad for loud sources and close microphone placement.\u003c\/li\u003e\n\u003cli\u003e80 Hz, 6 dB\/octave low-cut filter reduces low-frequency noise.\u003c\/li\u003e\n\u003cli\u003eDiscrete Class A circuitry, transformerless output and all-metal housing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eCapsule:\u003c\/strong\u003e 1\/2-inch back-electret condenser\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePolar pattern:\u003c\/strong\u003e cardioid\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFrequency range:\u003c\/strong\u003e 20 Hz to 20 kHz\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSensitivity:\u003c\/strong\u003e 19 mV\/Pa (-35 dBV)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMaximum SPL:\u003c\/strong\u003e 136 \/ 156 dB SPL, 0 \/ -20 dB pad\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eEquivalent noise level:\u003c\/strong\u003e 16 dB\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDynamic range:\u003c\/strong\u003e 120 \/ 140 dB, 0 \/ -20 dB pad\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSignal-to-noise ratio:\u003c\/strong\u003e 78 dB\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eElectrical impedance:\u003c\/strong\u003e \u0026lt;200 ohms\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eRecommended load impedance:\u003c\/strong\u003e \u0026gt;1 kilohm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eLow-cut filter:\u003c\/strong\u003e 80 Hz, 6 dB\/octave, switchable\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAttenuation pad:\u003c\/strong\u003e -20 dB, switchable\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePower:\u003c\/strong\u003e 48 V phantom, 3.0 mA\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eConnector:\u003c\/strong\u003e 3-pin male XLR\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e 23 × 120 mm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 128 g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat’s Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003esE Electronics sE7 microphone\u003c\/li\u003e\n\u003cli\u003eMicrophone clip with stand thread adapter\u003c\/li\u003e\n\u003cli\u003eFoam windscreen\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho Is It For\u003c\/h3\u003e\n\u003cp\u003eThe sE7 is suitable for recording or reinforcing an individual acoustic instrument, drums, cymbals, a choir or a small ensemble. One microphone captures a mono signal; a stereo setup requires two microphones or the factory-matched Matched Pair package. A stand, an XLR cable and an input providing 48 V phantom power are required.\u003c\/p\u003e\n\u003ch3\u003eCan’t find the sE Electronics product you are looking for?\u003c\/h3\u003e\n\u003cp\u003eContact us: info@stageiq.lt or +370 636 55536.\u003c\/p\u003e","brand":"sE Electronics","offers":[{"title":"Default Title","offer_id":56192663290242,"sku":"1312770","price":95.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9736\/9730\/files\/se-electronics-se7-01_57f36589-ee39-4c1d-b7a8-358414079633.jpg?v=1789576854","url":"https:\/\/stageiq.lt\/en\/products\/se-electronics-se7","provider":"STAGE IQ","version":"1.0","type":"link"}