{"product_id":"electro-harmonix-lpb-3-linear-booster-equalizer","title":"Electro-Harmonix LPB-3 Effects Pedal","description":"\u003ch2\u003eElectro-Harmonix LPB-3 Effects Pedal\u003c\/h2\u003e\n\u003cp\u003eThe analog circuit can boost a mono signal by up to 33 dB. An active three-band EQ with parametric midrange control is housed in a compact Nano enclosure.\u003c\/p\u003e\n\u003cp\u003eBass and treble can be boosted or cut independently. For the midrange, you can select the center frequency, level and bandwidth, shaping the tone before increasing the overall volume.\u003c\/p\u003e\n\u003cp\u003eUse the pedal for a clean boost, to drive an amplifier harder, or to raise an instrument signal to line level in a recording setup. Connect the instrument to INPUT and route OUTPUT to a suitable amplifier or mixer input.\u003c\/p\u003e\n\u003cp\u003eInternal ±15 V power rails provide more headroom before clipping. This is an internal operating voltage and must not be supplied to the external power connector.\u003c\/p\u003e\n\u003ch3\u003eMain Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePRE-GAIN adjusts input gain over 0–20 dB before the EQ, while BOOST sets the overall output volume.\u003c\/li\u003e\n\u003cli\u003eMAX selects either 20 dB or 33 dB of maximum gain from input to output. The 20 dB setting allows greater dynamics; 33 dB can drive an amplifier harder.\u003c\/li\u003e\n\u003cli\u003eMID FREQ sets the midrange center frequency from 240 Hz to 3.3 kHz. MID LVL boosts or cuts this band, with a flat response at its center position.\u003c\/li\u003e\n\u003cli\u003eThe LOW setting of Q affects a broader frequency band. HIGH focuses the midrange adjustment on a narrower range.\u003c\/li\u003e\n\u003cli\u003eTREBLE boosts or cuts high frequencies above 3.2 kHz, with a flat response at the center position.\u003c\/li\u003e\n\u003cli\u003eBASS adjusts low frequencies below 240 Hz. Its center position leaves the bass response flat.\u003c\/li\u003e\n\u003cli\u003eWhen boosting EQ bands, reducing PRE-GAIN helps prevent clipping. When cutting bands, increasing PRE-GAIN can restore volume.\u003c\/li\u003e\n\u003cli\u003eA switch under the bottom cover selects TRUE bypass or BUFFERED bypass through an op-amp buffer. The factory TRUE position connects INPUT directly to OUTPUT, bypassing the circuitry.\u003c\/li\u003e\n\u003cli\u003eThe footswitch engages or bypasses the effect. The LED lights when the effect is active and goes out in bypass.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput Impedance:\u003c\/strong\u003e 1 MΩ\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Input Level:\u003c\/strong\u003e +20 dBu\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput Impedance:\u003c\/strong\u003e 660 Ω\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Output Level:\u003c\/strong\u003e +22 dBu\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e 9 V DC, center negative\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent Draw:\u003c\/strong\u003e 120 mA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Power Adapter Rating:\u003c\/strong\u003e at least 150 mA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Permitted Voltage:\u003c\/strong\u003e 12 V DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Power Adapter Output:\u003c\/strong\u003e 9.6 V DC, 200 mA (Electro-Harmonix 9.6DC-200)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (W × H × D):\u003c\/strong\u003e 69.85 × 53.34 × 114.3 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis model does not use batteries. An external power adapter is required.\u003c\/p\u003e\n\u003ch3\u003eWhat’s Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 × Electro-Harmonix LPB-3 Effects Pedal\u003c\/li\u003e\n\u003cli\u003eRegion-appropriate power adapter\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho Is It For\u003c\/h3\u003e\n\u003cp\u003eFor setups that need an instrument level boost together with focused tonal adjustment. Highlight a solo, drive an amplifier harder or adapt the signal level for recording, using the parametric midrange band to target the part of the tone you want to change.\u003c\/p\u003e\n\u003ch3\u003eCan’t find the Electro-Harmonix product you are looking for?\u003c\/h3\u003e\n\u003cp\u003eContact us: info@stageiq.lt or +370 636 55536.\u003c\/p\u003e","brand":"Electro Harmonix","offers":[{"title":"Default Title","offer_id":56192693535106,"sku":"5198358","price":99.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9736\/9730\/files\/electro-harmonix-lpb-3-01.jpg?v=1795088999","url":"https:\/\/stageiq.lt\/en\/products\/electro-harmonix-lpb-3-linear-booster-equalizer","provider":"STAGE IQ","version":"1.0","type":"link"}