{"title":"Turbosound","description":"\u003cp\u003eTurbosound – Didžiosios Britanijos profesionalios garso įrangos gamintojas, kurio sprendimai naudojami koncertuose, renginiuose, klubuose, kultūros erdvėse ir stacionariose įgarsinimo sistemose. Gamintojas žinomas dėl efektyvių garsiakalbių konstrukcijų, tolygios garso sklaidos ir profesionaliam naudojimui pritaikytų sistemų. Stage IQ kolekcijoje rasite Turbosound garso kolonėles, žemųjų dažnių kolonėles ir aktyvias garso sistemas.\u003c\/p\u003e","products":[{"product_id":"turbosound-milan-m18b","title":"TURBOSOUND MILAN M18B Powered Subwoofer","description":"\u003ch2\u003eTurbosound Milan M18B 18-Inch Powered Subwoofer\u003c\/h2\u003e\n\u003cp\u003eThe Turbosound Milan M18B is a 2,200 W powered 18-inch subwoofer designed for portable PA systems and permanent sound installations.\u003c\/p\u003e\n\u003cp\u003eIts bandpass enclosure provides efficient low-frequency reproduction and extends the frequency range of a Milan sound system. Steep cut-off slopes help the subwoofer integrate effectively with Milan Series full-range loudspeakers. A single M18B can provide low-frequency extension for one or two Milan Series top cabinets.\u003c\/p\u003e\n\u003cp\u003eThe integrated 2,200 W Class-D power amplifier and switch-mode power supply operate together with Klark Teknik digital signal processing. Dynamic equalisation and limiting manage system performance, while the high-excursion 18-inch low-frequency driver features a 4-inch voice coil and double suspension.\u003c\/p\u003e\n\u003cp\u003eThe onboard control panel provides level, polarity, bass boost and boost frequency controls. Two combination XLR \/ 6.3 mm inputs accept balanced or unbalanced signals, while two balanced XLR Thru outputs pass full-range signals to powered loudspeakers or additional powered subwoofers.\u003c\/p\u003e\n\u003cp\u003eThe screwed and glued birch plywood enclosure has a hard-wearing semi-matt black finish. A powder-coated perforated steel grille protects the driver, while the 36 mm pole-mount socket supports a satellite loudspeaker. Supplied plated steel castors with rubber tyres make the 48 kg cabinet easier to transport.\u003c\/p\u003e\n\u003ch3\u003eMain Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePowered 18-inch subwoofer extends the low-frequency performance of portable and permanently installed PA systems\u003c\/li\u003e\n\u003cli\u003e2,200 W Class-D power amplifier combines high output power with efficient operation\u003c\/li\u003e\n\u003cli\u003eKlark Teknik DSP with dynamic equalisation and limiting manages system performance\u003c\/li\u003e\n\u003cli\u003eBandpass enclosure provides efficient reproduction within a defined low-frequency range\u003c\/li\u003e\n\u003cli\u003eHigh-excursion 18-inch driver with a 4-inch voice coil and double suspension is designed for demanding low-frequency reproduction\u003c\/li\u003e\n\u003cli\u003eAdjustable +6 dB bass boost allows the centre frequency to be selected between 40 and 90 Hz\u003c\/li\u003e\n\u003cli\u003ePolarity switch helps align the subwoofer with the other loudspeakers in the system\u003c\/li\u003e\n\u003cli\u003eTwo combination XLR \/ 6.3 mm inputs accept balanced and unbalanced line-level signals\u003c\/li\u003e\n\u003cli\u003eTwo balanced XLR Thru outputs allow connection to powered full-range loudspeakers or additional subwoofers\u003c\/li\u003e\n\u003cli\u003eBirch plywood enclosure and perforated steel grille are suited to portable and permanent applications\u003c\/li\u003e\n\u003cli\u003e36 mm pole-mount socket supports a satellite loudspeaker above the subwoofer\u003c\/li\u003e\n\u003cli\u003ePlated steel castors with rubber tyres simplify transportation of the 48 kg cabinet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eType:\u003c\/strong\u003e powered bandpass subwoofer\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDriver:\u003c\/strong\u003e 1 x 18-inch low-frequency driver\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDriver diameter:\u003c\/strong\u003e 457 mm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eVoice coil:\u003c\/strong\u003e 4 inches\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMaximum output power:\u003c\/strong\u003e 2,200 W\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAmplifier class:\u003c\/strong\u003e Class-D\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSignal processing:\u003c\/strong\u003e Klark Teknik DSP with dynamic equalisation and limiting\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFrequency range (±3 dB):\u003c\/strong\u003e 40 Hz–100 Hz\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFrequency range (-10 dB):\u003c\/strong\u003e 30 Hz–150 Hz\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMaximum SPL:\u003c\/strong\u003e 134 dB peak, measured in half-space\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eBass boost:\u003c\/strong\u003e +6 dB, continuously adjustable from 40 to 90 Hz, Q = 1\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eControls:\u003c\/strong\u003e level, polarity, boost, boost frequency and mains power\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eInputs:\u003c\/strong\u003e 2 x combination XLR \/ 6.3 mm connectors, balanced or unbalanced\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eThru outputs:\u003c\/strong\u003e 2 x balanced 3-pin XLR connectors\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eInput sensitivity:\u003c\/strong\u003e +4 dBu with the level control at the centre position\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eInput impedance:\u003c\/strong\u003e 10 kΩ unbalanced, 20 kΩ balanced\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eIndicators:\u003c\/strong\u003e blue power, green signal and red limit LEDs\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAmplifier protection:\u003c\/strong\u003e short circuit, thermal, overcurrent and DC protection\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eEuropean mains voltage:\u003c\/strong\u003e 220–240 V AC\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFuse:\u003c\/strong\u003e T 6.3 A H 250 V\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePower consumption:\u003c\/strong\u003e 280 W at 1\/8 maximum power\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMains connector:\u003c\/strong\u003e IEC connector with integrated fuseholder\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eEnclosure:\u003c\/strong\u003e screwed and glued birch plywood\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFinish:\u003c\/strong\u003e semi-matt black paint\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eProtective grille:\u003c\/strong\u003e powder-coated perforated steel\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePole-mount socket:\u003c\/strong\u003e 36 mm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDimensions (H x W x D):\u003c\/strong\u003e 590 x 640 x 530 mm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eNet weight:\u003c\/strong\u003e 48 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIn the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTurbosound Milan M18B powered subwoofer\u003c\/li\u003e\n\u003cli\u003ePlated steel transport castors with rubber tyres\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho Is It For\u003c\/h3\u003e\n\u003cp\u003eThe Turbosound Milan M18B is designed for travelling musicians, houses of worship, banquet facilities, nightclubs and other venues requiring additional low-frequency output in a portable or permanently installed PA system.\u003c\/p\u003e\n\u003ch3\u003eCan’t find the Turbosound product you are looking for?\u003c\/h3\u003e\n\u003cp\u003eContact us: info@stageiq.lt or +370 636 55536.\u003c\/p\u003e","brand":"Turbosound","offers":[{"title":"Default Title","offer_id":55787386306946,"sku":"4033653022347","price":761.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9736\/9730\/files\/TurbosoundMilanM18B-img4.jpg?v=1784624435"},{"product_id":"turbosound-ip2000-v2","title":"Turbosound iP2000 V2 Powered Column Loudspeaker","description":"\u003ch2\u003eTurbosound iP2000 V2 Powered Column Loudspeaker\u003c\/h2\u003e\n\u003cp\u003eThe Turbosound iP2000 V2 is a modular powered column loudspeaker with a 12-inch subwoofer. Its built-in digital mixer, effects processor and Bluetooth connectivity support speech, live music and recorded audio in one system.\u003c\/p\u003e\n\u003cp\u003eThe column combines 16 neodymium midrange drivers with a high-frequency compression driver. A 120° horizontal dispersion pattern provides broad coverage for small to medium-sized venues.\u003c\/p\u003e\n\u003cp\u003eThe Klark Teknik Class-D amplifier delivers a maximum output of 1000 W. DSP presets adapt the response to the application and speaker placement, while onboard reverb adds ambience to vocals or instrument signals.\u003c\/p\u003e\n\u003cp\u003eTwo combination XLR and 6.35 mm inputs accept dynamic microphones or line-level sources. A rotary push encoder, buttons and an LCD display provide access to settings. Remote adjustment is also supported from a compatible iPhone or iPad.\u003c\/p\u003e\n\u003cp\u003eThe two-piece column fits directly into the base. Built-in connectors link the sections without additional speaker cables, while the modular assembly and base handles make the system easier to transport.\u003c\/p\u003e\n\u003ch3\u003eMain Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eA 12-inch subwoofer extends the column's reproduction into the low frequencies.\u003c\/li\u003e\n\u003cli\u003e120° horizontal dispersion covers a wide listening area.\u003c\/li\u003e\n\u003cli\u003eA three-channel digital mixer combines wired sources with Bluetooth audio.\u003c\/li\u003e\n\u003cli\u003eBuilt-in reverb adds ambience without an external effects processor.\u003c\/li\u003e\n\u003cli\u003eThree-band EQ and DSP presets allow adjustment of the system's sound.\u003c\/li\u003e\n\u003cli\u003eBluetooth streaming supports music playback from a compatible phone or tablet.\u003c\/li\u003e\n\u003cli\u003eRemote control allows settings to be adjusted from the audience area.\u003c\/li\u003e\n\u003cli\u003eThe modular column mounts without a separate speaker stand.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eType:\u003c\/strong\u003e modular powered column loudspeaker\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMaximum Output Power:\u003c\/strong\u003e 1000 W, independent of limiters and driver protection circuits\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAmplifier:\u003c\/strong\u003e Class-D, 3 channels\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFrequency Response:\u003c\/strong\u003e 45 Hz to 20 kHz (±3 dB); 38 Hz to 20 kHz (-10 dB)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMaximum SPL:\u003c\/strong\u003e 123 dB\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHorizontal Dispersion:\u003c\/strong\u003e 120° at -6 dB\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDrivers:\u003c\/strong\u003e 1 × 12-inch (305 mm) LF driver, 16 × 2.75-inch (70 mm) MF drivers, 1 × 1-inch (25 mm) HF compression driver\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eInputs:\u003c\/strong\u003e 2 × combination XLR \/ 6.35 mm jack\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eLink Outputs:\u003c\/strong\u003e XLR\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDSP:\u003c\/strong\u003e EQ, reverb, application and positioning presets, independent HF and LF limiters\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eEuropean Mains Supply:\u003c\/strong\u003e 220–240 V AC, 50\/60 Hz\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePower Consumption:\u003c\/strong\u003e 110 W at 1\/8 maximum power\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAssembled Dimensions (H × W × D):\u003c\/strong\u003e 2063 × 420 × 500 mm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eBase Dimensions (H × W × D):\u003c\/strong\u003e 485 × 420 × 500 mm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 30.9 kg\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eConstruction:\u003c\/strong\u003e 15 mm birch plywood base, aluminium alloy column, steel grille\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFinish:\u003c\/strong\u003e semi-matte black\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat’s Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 × Turbosound iP2000 V2 system, comprising a subwoofer base and a two-piece column.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe protective cover and column transport bag are sold separately.\u003c\/p\u003e\n\u003ch3\u003eWho Is It For\u003c\/h3\u003e\n\u003cp\u003eSuitable for small live music events, speech reinforcement, presentations and music playback in small to medium-sized indoor venues.\u003c\/p\u003e\n\u003ch3\u003eCan’t find the Turbosound product you are looking for?\u003c\/h3\u003e\n\u003cp\u003eContact us: info@stageiq.lt or +370 636 55536.\u003c\/p\u003e","brand":"Turbosound","offers":[{"title":"Default Title","offer_id":55789937885570,"sku":"4033653108218","price":944.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9736\/9730\/files\/Turbosound-iP2000-V2-front.jpg?v=1788518574"},{"product_id":"turbosound-milan-m10","title":"TURBOSOUND MILAN M10 Powered PA Loudspeaker","description":"\u003ch2\u003eTurbosound Milan M10 10-Inch Two-Way Powered PA Loudspeaker\u003c\/h2\u003e\n\u003cp\u003eThe Turbosound Milan M10 is a 600 W powered 10-inch two-way PA loudspeaker designed for portable sound systems, stage monitoring and permanent installations.\u003c\/p\u003e\n\u003cp\u003eThe M10 combines a high-excursion 10-inch low-frequency driver with a 1-inch high-frequency compression driver. Its elliptical waveguide controls sound dispersion and provides 90° horizontal by 60° vertical coverage.\u003c\/p\u003e\n\u003cp\u003eThe integrated 600 W Class-D amplification system operates together with Klark Teknik digital signal processing. Separate low- and high-frequency amplification, an active crossover, dynamic equalisation and limiting manage the loudspeaker across its operating frequency range.\u003c\/p\u003e\n\u003cp\u003eTwo independent input channels feature combination XLR \/ 6.3 mm connectors, selectable microphone or line-level sensitivity and individual level controls. The integrated two-band EQ adjusts bass and treble, while the Speech and Music modes optimise the frequency response for spoken-word or music applications. A balanced XLR Mix Out sends the combined input signal to another powered loudspeaker.\u003c\/p\u003e\n\u003cp\u003eThe switchable 100 Hz low-cut filter helps integrate the M10 with a subwoofer or configure it as a stage monitor. Its lightweight polypropylene enclosure includes recessed carrying handles, a dual-angle pole-mount socket and internal M10 rigging points for permanent installations.\u003c\/p\u003e\n\u003ch3\u003eMain Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePowered two-way 10-inch PA loudspeaker for portable systems, stage monitoring and permanent installations\u003c\/li\u003e\n\u003cli\u003e600 W Class-D amplification provides separate power for the low- and high-frequency sections\u003c\/li\u003e\n\u003cli\u003eKlark Teknik DSP with active crossover, dynamic equalisation and limiting manages system performance\u003c\/li\u003e\n\u003cli\u003eHigh-excursion 10-inch low-frequency driver with a low-mass voice coil supports accurate transient reproduction\u003c\/li\u003e\n\u003cli\u003e1-inch high-temperature compression driver extends high-frequency reproduction\u003c\/li\u003e\n\u003cli\u003eElliptical waveguide provides 90° x 60° dispersion and controlled audience coverage\u003c\/li\u003e\n\u003cli\u003eTwo independent mic\/line inputs allow direct connection of different audio sources\u003c\/li\u003e\n\u003cli\u003eIndividual input level controls help balance the volume of two connected sources\u003c\/li\u003e\n\u003cli\u003eTwo-band master EQ provides bass and treble adjustment\u003c\/li\u003e\n\u003cli\u003eSpeech and Music modes optimise the frequency response for voice or music applications\u003c\/li\u003e\n\u003cli\u003eSwitchable 100 Hz low-cut filter supports subwoofer integration and stage monitor use\u003c\/li\u003e\n\u003cli\u003eBalanced XLR Mix Out sends the combined input signal to an additional powered loudspeaker\u003c\/li\u003e\n\u003cli\u003eDual-angle pole-mount socket helps optimise loudspeaker positioning and audience coverage\u003c\/li\u003e\n\u003cli\u003eSix internal M10 rigging points support permanent installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eType:\u003c\/strong\u003e powered two-way full-range PA loudspeaker\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eLow-frequency driver:\u003c\/strong\u003e 1 x 10-inch\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHigh-frequency driver:\u003c\/strong\u003e 1 x 1-inch compression driver\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMaximum output power:\u003c\/strong\u003e 600 W\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eLow-frequency amplifier power:\u003c\/strong\u003e 500 W\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHigh-frequency amplifier power:\u003c\/strong\u003e 100 W\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAmplifier class:\u003c\/strong\u003e Class-D\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSignal processing:\u003c\/strong\u003e Klark Teknik DSP\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFrequency range (±3 dB):\u003c\/strong\u003e 55 Hz–18 kHz\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFrequency range (-10 dB):\u003c\/strong\u003e 50 Hz–20 kHz\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDispersion:\u003c\/strong\u003e 90° horizontal x 60° vertical\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMaximum SPL:\u003c\/strong\u003e 126 dB peak\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eBass EQ:\u003c\/strong\u003e ±6 dB at 80 Hz\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTreble EQ:\u003c\/strong\u003e ±6 dB at 12 kHz\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eLow-cut filter:\u003c\/strong\u003e switchable, 100 Hz\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSound modes:\u003c\/strong\u003e Speech and Music\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eInputs:\u003c\/strong\u003e 2 x combination XLR \/ 6.3 mm mic\/line inputs\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOutput:\u003c\/strong\u003e 1 x balanced 3-pin XLR Mix Out\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMicrophone input sensitivity:\u003c\/strong\u003e -32 dBu\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eLine input sensitivity:\u003c\/strong\u003e -2 dBu\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMicrophone input impedance:\u003c\/strong\u003e 560 Ω unbalanced, 1 kΩ balanced\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eLine input impedance:\u003c\/strong\u003e 20 kΩ unbalanced, 40 kΩ balanced\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eControls:\u003c\/strong\u003e input level, mic\/line selection, bass and treble EQ, low-cut filter, Speech\/Music mode, front LED and mains power\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eIndicators:\u003c\/strong\u003e power, signal, limit and input clip LEDs\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAmplifier protection:\u003c\/strong\u003e short circuit, open circuit and thermal protection\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eEuropean mains voltage:\u003c\/strong\u003e 220–240 V AC\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFuse:\u003c\/strong\u003e T 3.15 A H 250 V\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePower consumption:\u003c\/strong\u003e 80 W at 1\/8 maximum power\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMains connector:\u003c\/strong\u003e IEC connector with integrated fuseholder\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eEnclosure:\u003c\/strong\u003e injection-moulded polypropylene with recessed carrying handles\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eProtective grille:\u003c\/strong\u003e powder-coated perforated steel with foam backing\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePole-mount socket:\u003c\/strong\u003e 35 mm, dual-angle\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eRigging points:\u003c\/strong\u003e 6 x internal M10 threads\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDimensions (H x W x D):\u003c\/strong\u003e 522 x 329 x 294 mm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eNet weight:\u003c\/strong\u003e 13.3 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIn the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTurbosound Milan M10 powered PA loudspeaker\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho Is It For\u003c\/h3\u003e\n\u003cp\u003eThe Turbosound Milan M10 is designed for portable PA systems, music and speech reproduction, small live sound systems, stage monitoring and permanent sound installations. Its two mic\/line inputs also allow it to be used in simple setups without a separate mixing console.\u003c\/p\u003e\n\u003ch3\u003eCan’t find the Turbosound product you are looking for?\u003c\/h3\u003e\n\u003cp\u003eContact us: info@stageiq.lt or +370 636 55536.\u003c\/p\u003e","brand":"Turbosound","offers":[{"title":"Default Title","offer_id":55789966197122,"sku":"4033653022316","price":303.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9736\/9730\/files\/imgi_4_turbosound-m10-600w-10-inch-powered-speaker-musicmajlis-1.jpg?v=1784625318"},{"product_id":"turbosound-milan-m12","title":"TURBOSOUND MILAN M12 Powered PA Loudspeaker","description":"\u003ch2\u003eTurbosound Milan M12 12-Inch Two-Way Powered PA Loudspeaker\u003c\/h2\u003e\n\u003cp\u003eThe Turbosound Milan M12 is a 1,100 W powered 12-inch two-way PA loudspeaker designed for portable sound systems, stage monitoring and permanent installations.\u003c\/p\u003e\n\u003cp\u003eThe M12 combines a high-excursion 12-inch low-frequency driver with a 1-inch high-frequency compression driver. Its elliptical waveguide controls sound dispersion and provides 90° horizontal by 60° vertical coverage.\u003c\/p\u003e\n\u003cp\u003eThe integrated 1,100 W Class-D amplification system operates together with Klark Teknik digital signal processing. Separate low- and high-frequency amplification, an active crossover, dynamic equalisation and limiting manage the loudspeaker across its operating frequency range.\u003c\/p\u003e\n\u003cp\u003eTwo independent input channels feature combination XLR \/ 6.3 mm connectors, selectable microphone or line-level sensitivity and individual level controls. The integrated two-band EQ adjusts bass and treble, while the Speech and Music modes optimise the frequency response for spoken-word or music applications. A balanced XLR Mix Out sends the combined input signal to another powered loudspeaker.\u003c\/p\u003e\n\u003cp\u003eThe switchable 100 Hz low-cut filter helps integrate the M12 with a subwoofer or configure it as a stage monitor. Its polypropylene enclosure includes recessed carrying handles, a dual-angle pole-mount socket and internal M10 rigging points for permanent installations.\u003c\/p\u003e\n\u003ch3\u003eMain Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePowered two-way 12-inch PA loudspeaker for portable systems, stage monitoring and permanent installations\u003c\/li\u003e\n\u003cli\u003e1,100 W Class-D amplification provides separate power for the low- and high-frequency sections\u003c\/li\u003e\n\u003cli\u003eKlark Teknik DSP with active crossover, dynamic equalisation and limiting manages system performance\u003c\/li\u003e\n\u003cli\u003eHigh-excursion 12-inch low-frequency driver with a low-mass voice coil supports accurate transient reproduction\u003c\/li\u003e\n\u003cli\u003e1-inch high-temperature compression driver extends high-frequency reproduction\u003c\/li\u003e\n\u003cli\u003eElliptical waveguide provides 90° x 60° dispersion and controlled audience coverage\u003c\/li\u003e\n\u003cli\u003eTwo independent mic\/line inputs allow direct connection of different audio sources\u003c\/li\u003e\n\u003cli\u003eIndividual input level controls help balance the volume of two connected sources\u003c\/li\u003e\n\u003cli\u003eTwo-band master EQ provides bass and treble adjustment\u003c\/li\u003e\n\u003cli\u003eSpeech and Music modes optimise the frequency response for voice or music applications\u003c\/li\u003e\n\u003cli\u003eSwitchable 100 Hz low-cut filter supports subwoofer integration and stage monitor use\u003c\/li\u003e\n\u003cli\u003eBalanced XLR Mix Out sends the combined input signal to an additional powered loudspeaker\u003c\/li\u003e\n\u003cli\u003eDual-angle pole-mount socket helps optimise loudspeaker positioning and audience coverage\u003c\/li\u003e\n\u003cli\u003eSix internal M10 rigging points support permanent installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eType:\u003c\/strong\u003e powered two-way full-range PA loudspeaker\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eLow-frequency driver:\u003c\/strong\u003e 1 x 12-inch\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eLow-frequency driver diameter:\u003c\/strong\u003e 305 mm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHigh-frequency driver:\u003c\/strong\u003e 1 x 1-inch compression driver\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHigh-frequency diaphragm:\u003c\/strong\u003e aluminium\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMaximum output power:\u003c\/strong\u003e 1,100 W\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eLow-frequency amplifier power:\u003c\/strong\u003e 1,000 W\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHigh-frequency amplifier power:\u003c\/strong\u003e 100 W\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAmplifier class:\u003c\/strong\u003e Class-D\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSignal processing:\u003c\/strong\u003e Klark Teknik DSP\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFrequency range (±3 dB):\u003c\/strong\u003e 50 Hz–18 kHz\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFrequency range (-10 dB):\u003c\/strong\u003e 45 Hz–20 kHz\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDispersion:\u003c\/strong\u003e 90° horizontal x 60° vertical\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMaximum SPL:\u003c\/strong\u003e 128 dB peak\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eBass EQ:\u003c\/strong\u003e ±6 dB at 80 Hz\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTreble EQ:\u003c\/strong\u003e ±6 dB at 12 kHz\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eLow-cut filter:\u003c\/strong\u003e switchable, 100 Hz\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSound modes:\u003c\/strong\u003e Speech and Music\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eInputs:\u003c\/strong\u003e 2 x combination XLR \/ 6.3 mm mic\/line inputs\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOutput:\u003c\/strong\u003e 1 x balanced 3-pin XLR Mix Out\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMicrophone input sensitivity:\u003c\/strong\u003e -32 dBu\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eLine input sensitivity:\u003c\/strong\u003e -2 dBu\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMicrophone input impedance:\u003c\/strong\u003e 560 Ω unbalanced, 1 kΩ balanced\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eLine input impedance:\u003c\/strong\u003e 20 kΩ unbalanced, 40 kΩ balanced\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eControls:\u003c\/strong\u003e input level, mic\/line selection, bass and treble EQ, low-cut filter, Speech\/Music mode, front LED and mains power\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eIndicators:\u003c\/strong\u003e power, signal, limit and input clip LEDs\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAmplifier protection:\u003c\/strong\u003e short circuit, open circuit and thermal protection\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eEuropean mains voltage:\u003c\/strong\u003e 220–240 V AC\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFuse:\u003c\/strong\u003e T 4 A H 250 V\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePower consumption:\u003c\/strong\u003e 140 W at 1\/8 maximum power\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMains connector:\u003c\/strong\u003e IEC connector with integrated fuseholder\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eEnclosure:\u003c\/strong\u003e injection-moulded polypropylene with recessed carrying handles\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eProtective grille:\u003c\/strong\u003e powder-coated perforated steel with foam backing\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePole-mount socket:\u003c\/strong\u003e 35 mm, dual-angle\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eRigging points:\u003c\/strong\u003e 6 x internal M10 threads\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDimensions (H x W x D):\u003c\/strong\u003e 620 x 394 x 330 mm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eNet weight:\u003c\/strong\u003e 20.5 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIn the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTurbosound Milan M12 powered PA loudspeaker\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho Is It For\u003c\/h3\u003e\n\u003cp\u003eThe Turbosound Milan M12 is designed for portable PA systems, music and speech reproduction, live sound systems, stage monitoring and permanent sound installations. Its two mic\/line inputs also allow it to be used in simple setups without a separate mixing console.\u003c\/p\u003e\n\u003ch3\u003eCan’t find the Turbosound product you are looking for?\u003c\/h3\u003e\n\u003cp\u003eContact us: info@stageiq.lt or +370 636 55536.\u003c\/p\u003e","brand":"Turbosound","offers":[{"title":"Default Title","offer_id":55789966623106,"sku":"4033653022309","price":365.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9736\/9730\/files\/imgi_4_Image_TS_0313-AEU_M12_Front_XL.jpg?v=1784625660"},{"product_id":"turbosound-milan-m15","title":"Turbosound Milan M15 Two-Way Powered PA Loudspeaker","description":"\u003ch2\u003eTurbosound Milan M15 15-Inch Two-Way Powered PA Loudspeaker\u003c\/h2\u003e\n\u003cp\u003eThe Turbosound Milan M15 is a 1,100 W powered 15-inch two-way PA loudspeaker designed for portable sound systems, stage monitoring and permanent installations.\u003c\/p\u003e\n\u003cp\u003eThe M15 combines a high-excursion 15-inch low-frequency driver with a 1-inch high-frequency compression driver. Its elliptical waveguide controls sound dispersion and provides 90° horizontal by 60° vertical coverage.\u003c\/p\u003e\n\u003cp\u003eThe integrated 1,100 W Class-D amplification system operates together with Klark Teknik digital signal processing. Separate low- and high-frequency amplification, an active crossover, dynamic equalisation and limiting manage the loudspeaker across its operating frequency range.\u003c\/p\u003e\n\u003cp\u003eTwo independent input channels feature combination XLR \/ 6.3 mm connectors, selectable microphone or line-level sensitivity and individual level controls. The integrated two-band EQ adjusts bass and treble, while the Speech and Music modes optimise the frequency response for spoken-word or music applications. A balanced XLR Mix Out sends the combined input signal to another powered loudspeaker.\u003c\/p\u003e\n\u003cp\u003eThe switchable 100 Hz low-cut filter helps integrate the M15 with a subwoofer or configure it as a stage monitor. Symmetrical 43° enclosure sides support floor monitor positioning, while the dual-angle pole-mount socket and six internal M10 rigging points provide additional installation options.\u003c\/p\u003e\n\u003ch3\u003eMain Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePowered two-way 15-inch PA loudspeaker for portable systems, stage monitoring and permanent installations\u003c\/li\u003e\n\u003cli\u003e1,100 W Class-D amplification provides separate power for the low- and high-frequency sections\u003c\/li\u003e\n\u003cli\u003eKlark Teknik DSP with active crossover, dynamic equalisation and limiting manages system performance\u003c\/li\u003e\n\u003cli\u003eHigh-excursion 15-inch low-frequency driver with a low-mass voice coil supports accurate transient reproduction\u003c\/li\u003e\n\u003cli\u003e1-inch high-temperature compression driver extends high-frequency reproduction\u003c\/li\u003e\n\u003cli\u003eElliptical waveguide provides 90° x 60° dispersion and controlled audience coverage\u003c\/li\u003e\n\u003cli\u003eTwo independent mic\/line inputs allow direct connection of different audio sources\u003c\/li\u003e\n\u003cli\u003eIndividual input level controls help balance the volume of two connected sources\u003c\/li\u003e\n\u003cli\u003eTwo-band master EQ provides bass and treble adjustment\u003c\/li\u003e\n\u003cli\u003eSpeech and Music modes optimise the frequency response for voice or music applications\u003c\/li\u003e\n\u003cli\u003eSwitchable 100 Hz low-cut filter supports subwoofer integration and stage monitor use\u003c\/li\u003e\n\u003cli\u003eBalanced XLR Mix Out sends the combined input signal to an additional powered loudspeaker\u003c\/li\u003e\n\u003cli\u003eSymmetrical 43° enclosure sides allow the loudspeaker to be used as a floor monitor\u003c\/li\u003e\n\u003cli\u003eDual-angle pole-mount socket helps optimise loudspeaker positioning and audience coverage\u003c\/li\u003e\n\u003cli\u003eSix internal M10 rigging points support vertical or horizontal permanent installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eType:\u003c\/strong\u003e powered full-range PA loudspeaker\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSystem:\u003c\/strong\u003e two-way\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eLow-frequency driver:\u003c\/strong\u003e 1 x 15-inch\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eLow-frequency driver diameter:\u003c\/strong\u003e 381 mm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHigh-frequency driver:\u003c\/strong\u003e 1 x 1-inch compression driver\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHigh-frequency diaphragm:\u003c\/strong\u003e aluminium\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMaximum output power:\u003c\/strong\u003e 1,100 W\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eLow-frequency amplifier power:\u003c\/strong\u003e 1,000 W\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHigh-frequency amplifier power:\u003c\/strong\u003e 100 W\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAmplifier class:\u003c\/strong\u003e Class-D\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSignal processing:\u003c\/strong\u003e Klark Teknik DSP\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFrequency range (±3 dB):\u003c\/strong\u003e 45 Hz–18 kHz\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFrequency range (-10 dB):\u003c\/strong\u003e 40 Hz–20 kHz\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDispersion:\u003c\/strong\u003e 90° horizontal x 60° vertical\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMaximum SPL:\u003c\/strong\u003e 130 dB peak\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eBass EQ:\u003c\/strong\u003e ±6 dB at 80 Hz\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTreble EQ:\u003c\/strong\u003e ±6 dB at 12 kHz\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eLow-cut filter:\u003c\/strong\u003e switchable, 100 Hz\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSound modes:\u003c\/strong\u003e Speech and Music\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eInputs:\u003c\/strong\u003e 2 x combination XLR \/ 6.3 mm mic\/line inputs\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOutput:\u003c\/strong\u003e 1 x balanced 3-pin XLR Mix Out\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMicrophone input sensitivity:\u003c\/strong\u003e -32 dBu\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eLine input sensitivity:\u003c\/strong\u003e -2 dBu\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMicrophone input impedance:\u003c\/strong\u003e 560 Ω unbalanced, 1 kΩ balanced\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eLine input impedance:\u003c\/strong\u003e 20 kΩ unbalanced, 40 kΩ balanced\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eControls:\u003c\/strong\u003e input level, mic\/line selection, bass and treble EQ, low-cut filter, Speech\/Music mode, front LED and mains power\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eIndicators:\u003c\/strong\u003e power, signal, limit and input clip LEDs\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFront badge modes:\u003c\/strong\u003e on, off or limit indication\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAmplifier protection:\u003c\/strong\u003e short circuit, open circuit and thermal protection\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eEuropean mains voltage:\u003c\/strong\u003e 220–240 V AC\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFuse:\u003c\/strong\u003e T 4 A H 250 V\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePower consumption:\u003c\/strong\u003e 140 W at 1\/8 maximum power\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMains connector:\u003c\/strong\u003e IEC connector with integrated fuseholder\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eEnclosure:\u003c\/strong\u003e injection-moulded polypropylene with recessed carrying handle\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eEnclosure side angle:\u003c\/strong\u003e 43°\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eProtective grille:\u003c\/strong\u003e powder-coated perforated steel with foam backing\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePole-mount socket:\u003c\/strong\u003e 35 mm, dual-angle\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eRigging points:\u003c\/strong\u003e 6 x internal M10 threads\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDimensions (H x W x D):\u003c\/strong\u003e 719 x 457 x 368 mm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eNet weight:\u003c\/strong\u003e 27.7 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIn the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTurbosound Milan M15 powered PA loudspeaker\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho Is It For\u003c\/h3\u003e\n\u003cp\u003eThe Turbosound Milan M15 is designed for travelling musicians, houses of worship, banquet facilities, nightclubs, live sound systems, stage monitoring and permanent sound installations. Its two mic\/line inputs also allow it to be used in simple setups without a separate mixing console.\u003c\/p\u003e\n\u003ch3\u003eCan’t find the Turbosound product you are looking for?\u003c\/h3\u003e\n\u003cp\u003eContact us: info@stageiq.lt or +370 636 55536.\u003c\/p\u003e","brand":"Turbosound","offers":[{"title":"Default Title","offer_id":55789966819714,"sku":"4033653022323","price":456.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9736\/9730\/files\/imgi_4_turbosound-m15-1100w-15-full-range-powered-loudspeaker-musicmajlis-1.jpg?v=1784631412"},{"product_id":"turbosound-milan-m15b","title":"Turbosound Milan M15B Powered Subwoofer","description":"\u003ch2\u003eTurbosound Milan M15B 15-Inch Powered Subwoofer\u003c\/h2\u003e\n\u003cp\u003eThe Turbosound Milan M15B is a 2,200 W powered 15-inch subwoofer designed for portable PA systems and permanent sound installations.\u003c\/p\u003e\n\u003cp\u003eIts bandpass enclosure increases the acoustic load presented to the driver for efficient low-frequency reproduction within a defined range. Steep cut-off slopes help the subwoofer integrate effectively with Milan Series full-range loudspeakers. A single M15B can provide low-frequency extension for one or two Milan Series top cabinets.\u003c\/p\u003e\n\u003cp\u003eThe integrated 2,200 W Class-D power amplifier and switch-mode power supply operate together with Klark Teknik digital signal processing. Dynamic equalisation and limiting functions manage system performance, while the custom-engineered high-excursion 15-inch low-frequency driver features a 4-inch voice coil and double suspension.\u003c\/p\u003e\n\u003cp\u003eThe onboard control panel provides level, polarity, bass boost and boost frequency controls. Two combination XLR \/ 6.3 mm inputs accept balanced or unbalanced signals, while two balanced XLR Thru outputs pass full-range signals to powered loudspeakers or additional powered subwoofers.\u003c\/p\u003e\n\u003cp\u003eThe screwed and glued birch plywood enclosure has a hard-wearing semi-matt black finish. A powder-coated perforated steel grille protects the driver, while the 36 mm pole-mount socket supports a satellite loudspeaker. Supplied plated steel castors with rubber tyres make the cabinet easier to transport.\u003c\/p\u003e\n\u003ch3\u003eMain Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePowered 15-inch subwoofer extends the low-frequency performance of portable and permanently installed PA systems\u003c\/li\u003e\n\u003cli\u003e2,200 W Class-D power amplifier combines high output power with efficient operation\u003c\/li\u003e\n\u003cli\u003eKlark Teknik DSP with dynamic equalisation and limiting manages system performance\u003c\/li\u003e\n\u003cli\u003eBandpass enclosure provides efficient low-frequency reproduction within a defined frequency range\u003c\/li\u003e\n\u003cli\u003eHigh-excursion 15-inch driver with a 4-inch voice coil and double suspension is designed for demanding low-frequency reproduction\u003c\/li\u003e\n\u003cli\u003eAdjustable +6 dB bass boost allows the centre frequency to be selected between 40 and 90 Hz\u003c\/li\u003e\n\u003cli\u003ePolarity switch helps align the subwoofer with the other loudspeakers in the system\u003c\/li\u003e\n\u003cli\u003eTwo combination XLR \/ 6.3 mm inputs accept balanced and unbalanced line-level signals\u003c\/li\u003e\n\u003cli\u003eTwo balanced XLR Thru outputs allow connection to powered full-range loudspeakers or additional subwoofers\u003c\/li\u003e\n\u003cli\u003eBirch plywood enclosure and perforated steel grille are suited to portable and permanent applications\u003c\/li\u003e\n\u003cli\u003e36 mm pole-mount socket supports a satellite loudspeaker above the subwoofer\u003c\/li\u003e\n\u003cli\u003ePlated steel castors with rubber tyres simplify transportation of the 37 kg cabinet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eType:\u003c\/strong\u003e powered bandpass subwoofer\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDriver:\u003c\/strong\u003e 1 x 15-inch low-frequency driver\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eVoice coil:\u003c\/strong\u003e 4 inches\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMaximum output power:\u003c\/strong\u003e 2,200 W\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAmplifier class:\u003c\/strong\u003e Class-D\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSignal processing:\u003c\/strong\u003e Klark Teknik DSP with dynamic equalisation and limiting\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFrequency range (±3 dB):\u003c\/strong\u003e 45 Hz–100 Hz\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFrequency range (-10 dB):\u003c\/strong\u003e 35 Hz–150 Hz\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMaximum SPL:\u003c\/strong\u003e 134 dB peak, measured in half-space\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eBass boost:\u003c\/strong\u003e +6 dB, continuously adjustable from 40 to 90 Hz, Q = 1\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eControls:\u003c\/strong\u003e level, polarity, boost, boost frequency and mains power\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eInputs:\u003c\/strong\u003e 2 x combination XLR \/ 6.3 mm connectors, balanced or unbalanced\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eThru outputs:\u003c\/strong\u003e 2 x balanced 3-pin XLR connectors\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eInput sensitivity:\u003c\/strong\u003e +4 dBu with the level control at the centre position\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eInput impedance:\u003c\/strong\u003e 10 kΩ unbalanced, 20 kΩ balanced\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eIndicators:\u003c\/strong\u003e blue power, green signal and red limit LEDs\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAmplifier protection:\u003c\/strong\u003e short circuit, thermal, overcurrent and DC protection\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eEuropean mains voltage:\u003c\/strong\u003e 220–240 V AC\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFuse:\u003c\/strong\u003e T 6.3 A H 250 V\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePower consumption:\u003c\/strong\u003e 280 W at 1\/8 maximum power\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMains connector:\u003c\/strong\u003e IEC connector with integrated fuseholder\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eEnclosure:\u003c\/strong\u003e screwed and glued birch plywood\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFinish:\u003c\/strong\u003e semi-matt black paint\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eProtective grille:\u003c\/strong\u003e powder-coated perforated steel\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePole-mount socket:\u003c\/strong\u003e 36 mm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDimensions (H x W x D):\u003c\/strong\u003e 495 x 530 x 480 mm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eNet weight:\u003c\/strong\u003e 37 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIn the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTurbosound Milan M15B powered subwoofer\u003c\/li\u003e\n\u003cli\u003e4 plated steel transport castors with rubber tyres\u003c\/li\u003e\n\u003cli\u003eCastor mounting screws\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho Is It For\u003c\/h3\u003e\n\u003cp\u003eThe Turbosound Milan M15B is designed for travelling musicians, houses of worship, banquet facilities, nightclubs and other venues requiring additional low-frequency output in a portable or permanently installed PA system.\u003c\/p\u003e\n\u003ch3\u003eCan’t find the Turbosound product you are looking for?\u003c\/h3\u003e\n\u003cp\u003eContact us: info@stageiq.lt or +370 636 55536.\u003c\/p\u003e","brand":"Turbosound","offers":[{"title":"Default Title","offer_id":55789966885250,"sku":"4033653022354","price":565.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9736\/9730\/files\/TurbosoundMilanM15B.jpg?v=1784622789"},{"product_id":"turbosound-ix12","title":"Turbosound iX12 Two-Way Powered Loudspeaker","description":"\u003ch2\u003eTurbosound iX12 Two-Way Powered Loudspeaker\u003c\/h2\u003e\n\u003cp\u003eThe Turbosound iX12 is a 1,000 W two-way powered loudspeaker with KLARK TEKNIK DSP, Bluetooth audio streaming and remote control, designed for portable and fixed music and speech sound reinforcement systems.\u003c\/p\u003e\n\u003cp\u003eThe loudspeaker combines a 12-inch low-frequency driver with a low-mass voice coil and a 1-inch titanium-dome compression driver. Its nominal 80° horizontal by 60° vertical dispersion pattern helps direct sound across the intended audience area.\u003c\/p\u003e\n\u003cp\u003eThe 1,000 W amplification system uses a Class-D amplifier for the low-frequency driver and a Class-AB amplifier for the high-frequency driver. KLARK TEKNIK digital signal processing provides positioning, sound mode, phase, equalisation and high-pass crossover settings. Factory presets allow the loudspeaker response to be configured for stand-mounted operation or floor-monitor applications.\u003c\/p\u003e\n\u003cp\u003eThe integrated 3-channel digital mixer can be operated locally through the backlit LCD screen and rotary push encoder or controlled remotely from an iPhone or iPad. Bluetooth connectivity also supports wireless stereo audio streaming. When two compatible iX loudspeakers are used, master–slave pairing distributes the left and right channels to create a stereo system.\u003c\/p\u003e\n\u003cp\u003eTwo combination XLR \/ 6.3 mm input connectors accept microphone and line-level signals, while the balanced XLR output can route the signal to another powered loudspeaker or audio device. The lightweight polypropylene enclosure, perforated steel grille, carrying handles and dual-angle 35 mm pole socket support portable use and fixed sound reinforcement applications.\u003c\/p\u003e\n\u003ch3\u003eMain Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTwo-way powered loudspeaker for portable and fixed sound reinforcement systems\u003c\/li\u003e\n\u003cli\u003e1,000 W amplification system combines Class-D low-frequency and Class-AB high-frequency amplifiers\u003c\/li\u003e\n\u003cli\u003e12-inch low-frequency driver with a low-mass voice coil supports improved transient response\u003c\/li\u003e\n\u003cli\u003e1-inch titanium-dome compression driver extends high-frequency reproduction\u003c\/li\u003e\n\u003cli\u003eKLARK TEKNIK DSP provides positioning, sound mode, phase and frequency-response controls\u003c\/li\u003e\n\u003cli\u003eIntegrated 3-channel digital mixer manages the analogue inputs and Bluetooth audio signal\u003c\/li\u003e\n\u003cli\u003eBacklit LCD screen and rotary push encoder provide direct access to system parameters\u003c\/li\u003e\n\u003cli\u003eRemote control from an iPhone or iPad allows settings to be adjusted from the stage or listening area\u003c\/li\u003e\n\u003cli\u003eBluetooth stereo audio streaming enables wireless music playback without an additional signal cable\u003c\/li\u003e\n\u003cli\u003eMaster–slave pairing allows two compatible iX loudspeakers to operate as a wireless stereo system\u003c\/li\u003e\n\u003cli\u003eTwo combination XLR \/ 6.3 mm inputs accommodate microphone and line-level sources\u003c\/li\u003e\n\u003cli\u003eBalanced XLR output allows the signal to be routed to an additional powered loudspeaker\u003c\/li\u003e\n\u003cli\u003eDual-angle 35 mm pole socket helps optimise the loudspeaker angle for audience coverage\u003c\/li\u003e\n\u003cli\u003eLightweight polypropylene enclosure and carrying handles simplify transportation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eProduct type:\u003c\/strong\u003e powered loudspeaker\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSystem:\u003c\/strong\u003e two-way\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMaximum output power:\u003c\/strong\u003e 1,000 W\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eLow-frequency amplifier:\u003c\/strong\u003e Class-D\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHigh-frequency amplifier:\u003c\/strong\u003e Class-AB\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFrequency response:\u003c\/strong\u003e 50 Hz–20 kHz, ±3 dB\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFrequency range:\u003c\/strong\u003e 42 Hz–20 kHz, –10 dB\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMaximum SPL:\u003c\/strong\u003e 125 dB\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eNominal dispersion:\u003c\/strong\u003e 80° horizontal × 60° vertical at –6 dB\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eLow-frequency driver:\u003c\/strong\u003e 1 × 12-inch (308.5 mm)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHigh-frequency driver:\u003c\/strong\u003e 1 × 1-inch (25.4 mm) compression driver\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCrossover type:\u003c\/strong\u003e active\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eLimiters:\u003c\/strong\u003e independent HF and LF\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAmplifier protection:\u003c\/strong\u003e short-circuit, open-circuit and thermal protection\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDigital mixer:\u003c\/strong\u003e 3-channel\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAudio inputs:\u003c\/strong\u003e 2 × combination XLR \/ 6.3 mm connectors\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eInput sensitivity:\u003c\/strong\u003e +4 dBu with the volume control set to 0 dB\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eInput impedance:\u003c\/strong\u003e 16 kΩ unbalanced, 33 kΩ balanced\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMaximum input level:\u003c\/strong\u003e +22 dBu\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAudio output:\u003c\/strong\u003e balanced XLR\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOutput impedance:\u003c\/strong\u003e 220 Ω unbalanced, 600 Ω balanced\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDSP settings:\u003c\/strong\u003e positioning, sound mode and phase\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eEqualisation:\u003c\/strong\u003e bass and treble controls\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHigh-pass crossover:\u003c\/strong\u003e Linkwitz-Riley, 24 dB\/octave\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDisplay:\u003c\/strong\u003e 128 × 32 LCD with blue backlight\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHardware control:\u003c\/strong\u003e rotary push encoder\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSettings protection:\u003c\/strong\u003e lock-out function for all parameters\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eRemote control:\u003c\/strong\u003e iOS interface via Bluetooth\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eBluetooth version:\u003c\/strong\u003e Bluetooth 4.0 dual mode\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eBluetooth frequency range:\u003c\/strong\u003e 2402–2480 MHz\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eBluetooth channel count:\u003c\/strong\u003e 79\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eBluetooth output power:\u003c\/strong\u003e 8 dBm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eBluetooth compatibility:\u003c\/strong\u003e A2DP 1.2 and BLE\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMaximum wireless range:\u003c\/strong\u003e 35 m without interference\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eStereo connectivity:\u003c\/strong\u003e master–slave loudspeaker pairing\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMains connection:\u003c\/strong\u003e IEC connector with integrated power switch\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePower supply:\u003c\/strong\u003e 220–240 V~, 50\/60 Hz\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePower consumption:\u003c\/strong\u003e 80 W at 1\/8 maximum power\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePole socket:\u003c\/strong\u003e dual-angle 35 mm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eEnclosure:\u003c\/strong\u003e injection-moulded polypropylene\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFinish:\u003c\/strong\u003e black\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eGrille:\u003c\/strong\u003e powder-coated perforated steel\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDimensions (H × W × D):\u003c\/strong\u003e 609 × 370 × 370 mm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eNet weight:\u003c\/strong\u003e 19.4 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIn the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTurbosound iX12 powered loudspeaker\u003c\/li\u003e\n\u003cli\u003eMains power cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho Is It For\u003c\/h3\u003e\n\u003cp\u003eThe Turbosound iX12 is designed for portable and fixed music and speech sound reinforcement systems. It is suitable for musicians, DJs, event sound engineers, presentations, and small to medium-sized venues requiring a powered loudspeaker with integrated DSP, a digital mixer, wireless audio streaming and remote control.\u003c\/p\u003e\n\u003ch3\u003eCan’t find the Turbosound product you are looking for?\u003c\/h3\u003e\n\u003cp\u003eContact us: info@stageiq.lt or +370 636 55536.\u003c\/p\u003e","brand":"Turbosound","offers":[{"title":"Default Title","offer_id":55789968425346,"sku":"4033653102988","price":417.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9736\/9730\/files\/10545413_800.jpg?v=1762256471"},{"product_id":"turbosound-ix15","title":"Turbosound iX15 Two-Way Powered Loudspeaker","description":"\u003ch2\u003eTurbosound iX15 Two-Way Powered Loudspeaker\u003c\/h2\u003e\n\n\u003cp\u003eThe Turbosound iX15 is a 1,000 W two-way powered loudspeaker with KLARK TEKNIK DSP, an integrated 3-channel digital mixer, Bluetooth audio streaming and remote control, designed for portable and fixed music and speech sound reinforcement systems.\u003c\/p\u003e\n\n\u003cp\u003eThe loudspeaker combines a 15-inch low-frequency driver with a low-mass voice coil and a 1-inch titanium-dome compression driver. Its nominal 75° horizontal by 55° vertical dispersion pattern helps direct sound across the intended audience area.\u003c\/p\u003e\n\n\u003cp\u003eThe 1,000 W amplification system uses a Class-D amplifier for the low-frequency driver and a Class-AB amplifier for the high-frequency driver. KLARK TEKNIK digital signal processing provides positioning, sound mode, phase, equalisation and high-pass crossover settings. Factory presets allow the loudspeaker response to be configured for stand-mounted operation or floor-monitor applications.\u003c\/p\u003e\n\n\u003cp\u003eThe integrated 3-channel digital mixer can be operated locally through the backlit LCD screen and rotary push encoder or controlled remotely from an iPhone or iPad. Bluetooth connectivity also supports wireless stereo audio streaming. When two compatible iX loudspeakers are used, master–slave pairing distributes the left and right channels to create a stereo system.\u003c\/p\u003e\n\n\u003cp\u003eTwo combination XLR \/ 6.3 mm input connectors accept microphone and line-level signals, while the balanced XLR output can route the signal to another powered loudspeaker or audio device. The fibre glass reinforced composite enclosure, perforated steel grille and dual-angle pole socket support transportation, portable use and fixed sound reinforcement applications.\u003c\/p\u003e\n\n\u003ch3\u003eMain Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eTwo-way powered loudspeaker for portable and fixed sound reinforcement systems\u003c\/li\u003e\n  \u003cli\u003e1,000 W amplification system combines Class-D low-frequency and Class-AB high-frequency amplifiers\u003c\/li\u003e\n  \u003cli\u003e15-inch low-frequency driver with a low-mass voice coil supports improved transient response\u003c\/li\u003e\n  \u003cli\u003e1-inch titanium-dome compression driver extends high-frequency reproduction\u003c\/li\u003e\n  \u003cli\u003eKLARK TEKNIK DSP provides positioning, sound mode, phase and frequency-response controls\u003c\/li\u003e\n  \u003cli\u003eIntegrated 3-channel digital mixer manages the analogue inputs and Bluetooth audio signal\u003c\/li\u003e\n  \u003cli\u003eBacklit LCD screen and rotary push encoder provide direct access to system parameters\u003c\/li\u003e\n  \u003cli\u003eRemote control from an iPhone or iPad allows settings to be adjusted from the stage or listening area\u003c\/li\u003e\n  \u003cli\u003eBluetooth stereo audio streaming enables wireless music playback without an additional signal cable\u003c\/li\u003e\n  \u003cli\u003eMaster–slave pairing allows two compatible iX loudspeakers to operate as a wireless stereo system\u003c\/li\u003e\n  \u003cli\u003eTwo combination XLR \/ 6.3 mm inputs accommodate microphone and line-level sources\u003c\/li\u003e\n  \u003cli\u003eBalanced XLR output allows the signal to be routed to an additional powered loudspeaker\u003c\/li\u003e\n  \u003cli\u003eDual-angle pole socket helps optimise the loudspeaker angle for audience coverage\u003c\/li\u003e\n  \u003cli\u003eComposite enclosure and steel grille support portable sound reinforcement applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003cstrong\u003eProduct type:\u003c\/strong\u003e powered loudspeaker\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003eSystem:\u003c\/strong\u003e two-way\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003eMaximum output power:\u003c\/strong\u003e 1,000 W\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003eLow-frequency amplifier:\u003c\/strong\u003e Class-D\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003eHigh-frequency amplifier:\u003c\/strong\u003e Class-AB\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003eFrequency response:\u003c\/strong\u003e 45 Hz–20 kHz, ±3 dB\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003eFrequency range:\u003c\/strong\u003e 39 Hz–20 kHz, –10 dB\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003eMaximum SPL:\u003c\/strong\u003e 126 dB\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003eNominal dispersion:\u003c\/strong\u003e 75° horizontal × 55° vertical at –6 dB\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003eLow-frequency driver:\u003c\/strong\u003e 1 × 15-inch (387 mm)\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003eHigh-frequency driver:\u003c\/strong\u003e 1 × 1-inch (25.4 mm) compression driver\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003eCrossover type:\u003c\/strong\u003e active\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003eLimiters:\u003c\/strong\u003e independent HF and LF\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003eAmplifier protection:\u003c\/strong\u003e short-circuit, open-circuit and thermal protection\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003eDigital mixer:\u003c\/strong\u003e 3-channel\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003eAudio inputs:\u003c\/strong\u003e 2 × combination XLR \/ 6.3 mm connectors\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003eInput sensitivity:\u003c\/strong\u003e +4 dBu with the volume control set to 0 dB\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003eInput impedance:\u003c\/strong\u003e 16 kΩ unbalanced, 33 kΩ balanced\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003eMaximum input level:\u003c\/strong\u003e +22 dBu\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003eAudio output:\u003c\/strong\u003e balanced XLR\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003eOutput impedance:\u003c\/strong\u003e 220 Ω unbalanced, 600 Ω balanced\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003eDSP settings:\u003c\/strong\u003e positioning, sound mode and phase\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003eEqualisation:\u003c\/strong\u003e bass and treble controls\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003eHigh-pass crossover:\u003c\/strong\u003e Linkwitz-Riley, 24 dB\/octave\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003eDisplay:\u003c\/strong\u003e 128 × 32 LCD with blue backlight\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003eHardware control:\u003c\/strong\u003e rotary push encoder\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003eSettings protection:\u003c\/strong\u003e lock-out function for all parameters\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003eRemote control:\u003c\/strong\u003e iOS interface via Bluetooth\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003eBluetooth version:\u003c\/strong\u003e Bluetooth 4.0 dual mode\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003eBluetooth frequency range:\u003c\/strong\u003e 2402–2480 MHz\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003eBluetooth channel count:\u003c\/strong\u003e 79\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003eBluetooth output power:\u003c\/strong\u003e 8 dBm\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003eBluetooth compatibility:\u003c\/strong\u003e A2DP 1.2 and BLE\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003eMaximum wireless range:\u003c\/strong\u003e 35 m without interference\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003eStereo connectivity:\u003c\/strong\u003e master–slave loudspeaker pairing\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003eMains connection:\u003c\/strong\u003e IEC connector with integrated power switch\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003ePower supply:\u003c\/strong\u003e 220–240 V~, 50\/60 Hz\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003ePower consumption:\u003c\/strong\u003e 80 W at 1\/8 maximum power\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003ePole socket:\u003c\/strong\u003e dual-angle\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003eEnclosure:\u003c\/strong\u003e fibre glass reinforced composite\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003eFinish:\u003c\/strong\u003e black\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003eGrille:\u003c\/strong\u003e powder-coated perforated steel\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003eDimensions (H × W × D):\u003c\/strong\u003e 711 × 450 × 381 mm\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003eNet weight:\u003c\/strong\u003e 22.4 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIn the Box\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eTurbosound iX15 powered loudspeaker\u003c\/li\u003e\n  \u003cli\u003eMains power cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWho Is It For\u003c\/h3\u003e\n\u003cp\u003eThe Turbosound iX15 is designed for portable and fixed music and speech sound reinforcement systems. It is suitable for musicians, DJs, event sound engineers, presentations, and small to medium-sized venues requiring a powered loudspeaker with integrated DSP, a digital mixer, wireless audio streaming and remote control.\u003c\/p\u003e\n\n\u003ch3\u003eCan’t find the Turbosound product you are looking for?\u003c\/h3\u003e\n\u003cp\u003eContact us: info@stageiq.lt or +370 636 55536.\u003c\/p\u003e","brand":"Turbosound","offers":[{"title":"Default Title","offer_id":55789968523650,"sku":"4033653102995","price":471.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9736\/9730\/files\/turbosound_ix15_2_way_1000w_15_1215404.jpg?v=1762269447"},{"product_id":"turbosound-iq10","title":"Turbosound iQ10 2-Way 10-Inch Powered Loudspeaker","description":"\u003ch2\u003eTurbosound iQ10 2-Way 10-Inch Powered Loudspeaker\u003c\/h2\u003e\n\u003cp\u003eThe Turbosound iQ10 is a 2-way 10-inch powered loudspeaker designed for portable and fixed-installation music and speech sound reinforcement applications.\u003c\/p\u003e\n\u003cp\u003eThe system combines a 10-inch low-frequency driver with a low-mass voice coil and a high-temperature 1-inch compression driver. A two-channel Klark Teknik Class-D amplifier delivers up to 2,500 W of output power, while independent HF, LF, peak and RMS limiting helps protect the loudspeaker system.\u003c\/p\u003e\n\u003cp\u003eIntegrated Klark Teknik DSP provides dynamic EQ, loudspeaker modelling, Spatial Contour Control, subwoofer integration and Feedback Control. The rear-panel LCD interface gives direct access to processing parameters, while the built-in USB port enables computer-based remote control and firmware updates.\u003c\/p\u003e\n\u003cp\u003eTwo mic\/line inputs with independent gain controls allow microphones and line-level sources to be connected directly. Separate linked outputs, a balanced Mix Out and ULTRANET digital audio networking support flexible integration with mixers, personal monitoring systems and other compatible equipment. The enclosure includes a dual-angle pole socket and three M10 rigging points for portable or installed use.\u003c\/p\u003e\n\u003ch3\u003eMain Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2-way powered loudspeaker for portable and fixed sound reinforcement applications\u003c\/li\u003e\n\u003cli\u003e10-inch low-frequency driver with a low-mass voice coil supports accurate transient reproduction\u003c\/li\u003e\n\u003cli\u003eHigh-temperature 1-inch compression driver extends high-frequency reproduction\u003c\/li\u003e\n\u003cli\u003eKlark Teknik Class-D amplification provides up to 2,500 W of output power\u003c\/li\u003e\n\u003cli\u003eIntegrated Klark Teknik DSP provides system control, dynamic EQ and transparent limiting\u003c\/li\u003e\n\u003cli\u003eSpeaker modelling presets reproduce the characteristics of selected loudspeaker systems\u003c\/li\u003e\n\u003cli\u003eSpatial Contour Control compensates the frequency response for stand, floor, wall or ceiling placement\u003c\/li\u003e\n\u003cli\u003eTwo mic\/line inputs with independent gain controls accommodate microphones and line-level sources\u003c\/li\u003e\n\u003cli\u003eULTRANET networking carries multichannel digital audio over CAT5 cable\u003c\/li\u003e\n\u003cli\u003eUSB connectivity enables computer-based remote control and firmware updates\u003c\/li\u003e\n\u003cli\u003eDual-angle pole socket helps optimise coverage for different audience areas\u003c\/li\u003e\n\u003cli\u003eThree M10 rigging points support permanent installation applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eSystem type:\u003c\/strong\u003e 2-way powered loudspeaker\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eLow-frequency driver:\u003c\/strong\u003e 1 × 10-inch (256 mm)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHigh-frequency driver:\u003c\/strong\u003e 1 × 1-inch (25.4 mm) compression driver\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFrequency response:\u003c\/strong\u003e 55 Hz – 18 kHz, ±3 dB\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFrequency range:\u003c\/strong\u003e 50 Hz – 20 kHz, -10 dB\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eNominal dispersion:\u003c\/strong\u003e 90° horizontal × 60° vertical at -6 dB\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMaximum SPL:\u003c\/strong\u003e 129 dB peak\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCrossover type:\u003c\/strong\u003e Active\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eLimiter:\u003c\/strong\u003e Independent HF, LF, peak and RMS\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMaximum output power:\u003c\/strong\u003e 2,500 W\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAmplifier type:\u003c\/strong\u003e Class-D\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAmplifier protection:\u003c\/strong\u003e Short-circuit, open-circuit and thermal protection\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAnalogue inputs:\u003c\/strong\u003e 2 × XLR\/TRS combo\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eInput sensitivity:\u003c\/strong\u003e Line +4 dBu; microphone -22 dBu, switchable\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eInput impedance:\u003c\/strong\u003e 20 kΩ unbalanced; 40 kΩ balanced\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMaximum input level:\u003c\/strong\u003e +21 dBu\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eLinked outputs:\u003c\/strong\u003e 2 × XLR\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMix output:\u003c\/strong\u003e 1 × balanced XLR\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOutput impedance:\u003c\/strong\u003e 100 Ω unbalanced; 200 Ω balanced\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eULTRANET connections:\u003c\/strong\u003e 2 × RJ45 input\/link\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDSP controls:\u003c\/strong\u003e Rotary push encoder; PROCESS, SETUP, EXIT and ENTER buttons\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMixer controls:\u003c\/strong\u003e 2 × gain controls and 2 × Line\/Mic switches\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDSP functions:\u003c\/strong\u003e Positioning, Sound Mode, Speaker Modelling and FBQ\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDisplay:\u003c\/strong\u003e 128 × 32 pixel blue-backlit LCD\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDelay:\u003c\/strong\u003e 0–300 ms\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eEqualisation:\u003c\/strong\u003e High- and low-shelving EQ; 2 × parametric EQ\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePresets:\u003c\/strong\u003e 20 total, including 19 user-definable presets\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHigh-pass filter:\u003c\/strong\u003e Linkwitz-Riley, 24 dB\/octave\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSettings protection:\u003c\/strong\u003e Lock-out function\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePower connections:\u003c\/strong\u003e Neutrik powerCON input and link output\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePower consumption:\u003c\/strong\u003e 150 W at 1\/8 maximum power\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eEnclosure:\u003c\/strong\u003e Injection-moulded polypropylene\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFinish:\u003c\/strong\u003e Black painted\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eGrille:\u003c\/strong\u003e Powder-coated perforated steel\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMounting:\u003c\/strong\u003e Dual-angle pole socket and 3 × M10 rigging points\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDimensions (H × W × D):\u003c\/strong\u003e 526 × 324 × 316 mm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eNet weight:\u003c\/strong\u003e 17.2 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIn the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTurbosound iQ10 powered loudspeaker\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho Is It For\u003c\/h3\u003e\n\u003cp\u003eThe Turbosound iQ10 is intended for musicians, DJs, sound engineers, venues and installation professionals who require a compact powered loudspeaker for portable music systems, speech reinforcement, stage monitoring or permanent installations.\u003c\/p\u003e\n\u003ch3\u003eCan’t find the Turbosound product you are looking for?\u003c\/h3\u003e\n\u003cp\u003eContact us: info@stageiq.lt or +370 636 55536.\u003c\/p\u003e","brand":"Turbosound","offers":[{"title":"Default Title","offer_id":55789981008258,"sku":"4033653022439","price":584.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9736\/9730\/files\/imgi_259_turbosound-iq10-2500w-10-powered-loudspeaker-musicmajlis-1.jpg?v=1784632861"},{"product_id":"turbosound-iq12","title":"Turbosound iQ12 Two-Way Powered Loudspeaker","description":"\u003ch2\u003eTurbosound iQ12 Two-Way Powered Loudspeaker\u003c\/h2\u003e\n\u003cp\u003eThe Turbosound iQ12 is a 2,500 W two-way powered loudspeaker designed for portable and fixed-installation music and speech sound reinforcement systems.\u003c\/p\u003e\n\u003cp\u003eThe loudspeaker combines a 12-inch low-frequency driver with a low-mass voice coil and a high-temperature 1-inch compression driver. Its nominal 80° horizontal by 60° vertical dispersion pattern helps direct sound evenly across the intended audience area.\u003c\/p\u003e\n\u003cp\u003eA two-channel KLARK TEKNIK Class-D amplifier delivers up to 2,500 W of output power. The integrated KLARK TEKNIK digital signal processor manages dynamic EQ, limiting, speaker modelling, subwoofer integration and feedback control. The SCC (Spatial Contour Control) function adjusts the frequency response according to whether the loudspeaker is positioned on a stand, floor, wall or ceiling.\u003c\/p\u003e\n\u003cp\u003eTwo independent input channels feature combination XLR \/ 6.3 mm connectors, selectable microphone or line-level sensitivity and individual gain controls. Dedicated XLR outputs for both channels and a separate Mix Out connector allow the signal to be routed to additional audio equipment. ULTRANET networking transmits up to 16 channels of digital audio between compatible mixers, loudspeakers and personal monitoring systems over CAT5 cable.\u003c\/p\u003e\n\u003cp\u003eLocal control is provided through a backlit LCD screen, a rotary push encoder and dedicated function buttons. The USB connection supports computer-based remote control and DSP or speaker-modelling firmware updates. A lightweight fibre glass reinforced composite enclosure, powder-coated perforated steel grille, internal rigging points and dual-angle pole mount make the iQ12 suitable for both portable use and permanent installations.\u003c\/p\u003e\n\u003ch3\u003eMain Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTwo-way powered loudspeaker for portable and fixed sound reinforcement systems\u003c\/li\u003e\n\u003cli\u003eKLARK TEKNIK Class-D amplifier delivers up to 2,500 W of output power\u003c\/li\u003e\n\u003cli\u003e12-inch low-frequency driver with a low-mass voice coil supports improved transient response\u003c\/li\u003e\n\u003cli\u003eHigh-temperature 1-inch compression driver with a copper-clad aluminium voice coil extends high-frequency reproduction\u003c\/li\u003e\n\u003cli\u003eKLARK TEKNIK DSP provides dynamic EQ, limiting, delay and system configuration functions\u003c\/li\u003e\n\u003cli\u003eSpeaker-modelling presets provide a selection of different loudspeaker response characteristics\u003c\/li\u003e\n\u003cli\u003eSCC processing compensates the frequency response according to loudspeaker position and installation\u003c\/li\u003e\n\u003cli\u003eIntegrated subwoofer alignment and feedback-control functions simplify system configuration\u003c\/li\u003e\n\u003cli\u003eTwo microphone or line-level inputs include independent gain controls and signal indicators\u003c\/li\u003e\n\u003cli\u003eULTRANET networking transmits up to 16 digital audio channels over a single CAT5 cable\u003c\/li\u003e\n\u003cli\u003eLCD screen and rotary push encoder provide direct access to DSP parameters\u003c\/li\u003e\n\u003cli\u003eUSB connectivity supports computer-based remote control and firmware updates\u003c\/li\u003e\n\u003cli\u003eDual-angle pole mount allows the loudspeaker angle to be adjusted for audience coverage\u003c\/li\u003e\n\u003cli\u003eInternal M10 rigging points support permanent installation applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eProduct type:\u003c\/strong\u003e powered loudspeaker\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSystem:\u003c\/strong\u003e two-way\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMaximum output power:\u003c\/strong\u003e 2,500 W\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAmplifier type:\u003c\/strong\u003e two-channel Class-D\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFrequency response:\u003c\/strong\u003e 52 Hz–18 kHz, ±3 dB\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFrequency range:\u003c\/strong\u003e 45 Hz–20 kHz, –10 dB\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMaximum SPL:\u003c\/strong\u003e 130 dB peak\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eNominal dispersion:\u003c\/strong\u003e 80° horizontal × 60° vertical at –6 dB\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eLow-frequency driver:\u003c\/strong\u003e 1 × 12-inch (308.5 mm)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHigh-frequency driver:\u003c\/strong\u003e 1 × 1-inch (25.4 mm) compression driver\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCrossover type:\u003c\/strong\u003e active\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eLimiters:\u003c\/strong\u003e independent HF, LF, peak and RMS\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAmplifier protection:\u003c\/strong\u003e short-circuit, open-circuit and thermal protection\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAudio inputs:\u003c\/strong\u003e 2 × combination XLR \/ 6.3 mm connectors\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eInput sensitivity:\u003c\/strong\u003e line +4 dBu or microphone –22 dBu, selectable\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eInput impedance:\u003c\/strong\u003e 20 kΩ unbalanced, 40 kΩ balanced\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMaximum input level:\u003c\/strong\u003e +21 dBu\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eChannel outputs:\u003c\/strong\u003e 2 × XLR, linked to the corresponding inputs\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMix output:\u003c\/strong\u003e 1 × balanced XLR\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOutput impedance:\u003c\/strong\u003e 100 Ω unbalanced, 200 Ω balanced\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eULTRANET connections:\u003c\/strong\u003e 2 × RJ45\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eULTRANET channels:\u003c\/strong\u003e 16\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eULTRANET latency:\u003c\/strong\u003e less than 0.9 ms\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eRecommended ULTRANET cable:\u003c\/strong\u003e shielded CAT5, up to 75 m\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDSP functions:\u003c\/strong\u003e position compensation, sound modes, speaker modelling and feedback control\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDisplay:\u003c\/strong\u003e 128 × 32 LCD with blue backlight\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDelay:\u003c\/strong\u003e 0–300 ms\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eEqualisation:\u003c\/strong\u003e high and low shelving EQ plus 2 parametric EQ bands\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePreset memory:\u003c\/strong\u003e 20 presets, including 19 user-definable presets\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHigh-pass crossover:\u003c\/strong\u003e Linkwitz-Riley, 24 dB\/octave\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMains connections:\u003c\/strong\u003e powerCON input and link output\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePower supply:\u003c\/strong\u003e 220–240 V~, 50\/60 Hz\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePower consumption:\u003c\/strong\u003e 150 W at 1\/8 maximum power\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eEnclosure:\u003c\/strong\u003e fibre glass reinforced composite\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eGrille:\u003c\/strong\u003e powder-coated perforated steel\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eRigging points:\u003c\/strong\u003e 3 × M10\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDimensions (H × W × D):\u003c\/strong\u003e 609 × 370 × 370 mm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eNet weight:\u003c\/strong\u003e 21.1 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIn the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTurbosound iQ12 powered loudspeaker\u003c\/li\u003e\n\u003cli\u003eMains power cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho Is It For\u003c\/h3\u003e\n\u003cp\u003eThe Turbosound iQ12 is designed for portable and fixed-installation music and speech sound reinforcement. It is suitable for sound engineers, musicians, performance and event venues, and other installations requiring a two-way powered loudspeaker with integrated DSP, flexible signal connectivity and ULTRANET digital audio networking.\u003c\/p\u003e\n\u003ch3\u003eCan’t find the Turbosound product you are looking for?\u003c\/h3\u003e\n\u003cp\u003eContact us: info@stageiq.lt or +370 636 55536.\u003c\/p\u003e","brand":"Turbosound","offers":[{"title":"Default Title","offer_id":56779455824258,"sku":"4033653022446","price":691.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9736\/9730\/files\/Turbosound-Q12-img2.jpg?v=1784633397"},{"product_id":"turbosound-iq15","title":"Turbosound iQ15 2-Way 15-Inch Powered Loudspeaker","description":"\u003ch2\u003eTurbosound iQ15 2-Way 15-Inch Powered Loudspeaker\u003c\/h2\u003e\n\u003cp\u003eThe Turbosound iQ15 is a 2,500 W 2-way 15-inch powered loudspeaker designed for portable and fixed-installation music and speech sound reinforcement systems.\u003c\/p\u003e\n\u003cp\u003eThe system combines a 15-inch low-frequency driver with a low-mass voice coil and a high-temperature 1-inch compression driver. It provides 75° horizontal by 55° vertical nominal dispersion and reaches a maximum peak SPL of 132 dB.\u003c\/p\u003e\n\u003cp\u003eA two-channel Klark Teknik Class-D amplifier delivers up to 2,500 W of output power. Integrated digital signal processing manages dynamic EQ, the active crossover, and independent HF, LF, peak and RMS limiting.\u003c\/p\u003e\n\u003cp\u003eSpeaker modelling, Spatial Contour Control, subwoofer integration and Feedback Control allow the system to be adapted to different applications. The rear-panel LCD, rotary push encoder and dedicated function buttons provide direct access to DSP settings.\u003c\/p\u003e\n\u003cp\u003eTwo XLR\/TRS combo mic\/line inputs have independent gain controls. Two linked XLR outputs, a balanced XLR Mix Out, 16-channel ULTRANET networking and USB connectivity support integration with digital mixers, personal monitoring systems and computer-based control.\u003c\/p\u003e\n\u003ch3\u003eMain Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2-way 15-inch powered loudspeaker for portable systems and fixed installations\u003c\/li\u003e\n\u003cli\u003e2,500 W two-channel Class-D amplifier independently powers the low- and high-frequency sections\u003c\/li\u003e\n\u003cli\u003eKlark Teknik DSP provides frequency-response, dynamics and system-protection control\u003c\/li\u003e\n\u003cli\u003e15-inch low-frequency driver with a low-mass voice coil supports accurate transient reproduction\u003c\/li\u003e\n\u003cli\u003eHigh-temperature 1-inch compression driver extends high-frequency reproduction\u003c\/li\u003e\n\u003cli\u003e75° x 55° nominal dispersion provides controlled audience coverage\u003c\/li\u003e\n\u003cli\u003e132 dB maximum peak SPL supports applications that require higher sound-pressure levels\u003c\/li\u003e\n\u003cli\u003eSpeaker modelling presets provide a choice of different acoustic characteristics\u003c\/li\u003e\n\u003cli\u003eSpatial Contour Control compensates the frequency response for stand, floor, wall or ceiling placement\u003c\/li\u003e\n\u003cli\u003eFBQ helps identify and control acoustic feedback\u003c\/li\u003e\n\u003cli\u003eUp to 300 ms of adjustable delay assists time alignment between system elements\u003c\/li\u003e\n\u003cli\u003eTwo mic\/line inputs accommodate microphones and line-level sources directly\u003c\/li\u003e\n\u003cli\u003eLinked XLR outputs and a balanced Mix Out simplify connection of additional powered loudspeakers\u003c\/li\u003e\n\u003cli\u003e16-channel ULTRANET networking carries digital audio over a single shielded CAT5 cable\u003c\/li\u003e\n\u003cli\u003eUSB connectivity enables computer-based remote control and firmware updates\u003c\/li\u003e\n\u003cli\u003eDual-angle pole socket and three M10 rigging points provide flexible mounting options\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eSystem type:\u003c\/strong\u003e 2-way full-range powered loudspeaker\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eLow-frequency driver:\u003c\/strong\u003e 1 x 15-inch (381 mm)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHigh-frequency driver:\u003c\/strong\u003e 1 x 1-inch (25.4 mm) compression driver\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMaximum output power:\u003c\/strong\u003e 2,500 W\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAmplifier type:\u003c\/strong\u003e Class-D\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAmplifier protection:\u003c\/strong\u003e Short-circuit, open-circuit and thermal protection\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFrequency response:\u003c\/strong\u003e 50 Hz–18 kHz, ±3 dB\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFrequency range:\u003c\/strong\u003e 42 Hz–20 kHz, -10 dB\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eNominal dispersion:\u003c\/strong\u003e 75° horizontal x 55° vertical at -6 dB points\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMaximum SPL:\u003c\/strong\u003e 132 dB peak\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCrossover type:\u003c\/strong\u003e Active\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHigh-pass filter:\u003c\/strong\u003e Linkwitz-Riley, 24 dB\/octave\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eLimiters:\u003c\/strong\u003e Independent HF, LF, peak and RMS limiting\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eInput limiter:\u003c\/strong\u003e Zero attack\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eEqualisation:\u003c\/strong\u003e High- and low-shelving EQ; 2 x parametric EQ\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDSP functions:\u003c\/strong\u003e Positioning, Sound Mode, Speaker Modelling and FBQ\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDelay:\u003c\/strong\u003e 0–300 ms\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePresets:\u003c\/strong\u003e 20 total, including 19 user-definable presets\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDisplay:\u003c\/strong\u003e 128 x 32 pixel blue-backlit LCD\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSettings protection:\u003c\/strong\u003e Lock-out function for all settings\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAnalogue inputs:\u003c\/strong\u003e 2 x XLR\/TRS combo\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eInput modes:\u003c\/strong\u003e Switchable microphone or line level\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMicrophone input sensitivity:\u003c\/strong\u003e -22 dBu\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eLine input sensitivity:\u003c\/strong\u003e +4 dBu\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eInput impedance:\u003c\/strong\u003e 20 kΩ unbalanced; 40 kΩ balanced\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMaximum input level:\u003c\/strong\u003e +21 dBu\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eLinked outputs:\u003c\/strong\u003e 2 x XLR, linked to inputs A and B\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMix output:\u003c\/strong\u003e 1 x balanced XLR\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOutput impedance:\u003c\/strong\u003e 100 Ω unbalanced; 200 Ω balanced\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eULTRANET connections:\u003c\/strong\u003e 2 x RJ45 input\/link\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eULTRANET channels:\u003c\/strong\u003e 16\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eULTRANET latency:\u003c\/strong\u003e Less than 0.9 ms\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eULTRANET cable:\u003c\/strong\u003e Shielded CAT5\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eRecommended ULTRANET cable length:\u003c\/strong\u003e Up to 75 m\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDSP controls:\u003c\/strong\u003e Rotary push encoder; Process, Setup, Exit and Enter buttons\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eChannel controls:\u003c\/strong\u003e 2 gain controls and 2 Line\/Mic switches\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eEuropean mains supply:\u003c\/strong\u003e 220–240 V~, 50\/60 Hz\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFuse:\u003c\/strong\u003e T 10 A H 250 V\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePower consumption:\u003c\/strong\u003e 150 W at 1\/8 maximum power\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePower connections:\u003c\/strong\u003e Neutrik powerCON 20 A input and 15 A link output\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eEnclosure:\u003c\/strong\u003e Injection-moulded polypropylene\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFinish:\u003c\/strong\u003e Black painted\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eGrille:\u003c\/strong\u003e Powder-coated perforated steel\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePole mount:\u003c\/strong\u003e Dual-angle socket\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eRigging points:\u003c\/strong\u003e 3 x M10\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDimensions (H x W x D):\u003c\/strong\u003e 711 x 450 x 381 mm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eNet weight:\u003c\/strong\u003e 26.1 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIn the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTurbosound iQ15 powered loudspeaker\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho Is It For\u003c\/h3\u003e\n\u003cp\u003eThe Turbosound iQ15 is intended for portable sound reinforcement systems, live events, music and speech applications, and fixed installations. Its DSP, adjustable delay and ULTRANET networking are particularly useful in multi-loudspeaker digital audio systems.\u003c\/p\u003e\n\u003ch3\u003eCan’t find the Turbosound product you are looking for?\u003c\/h3\u003e\n\u003cp\u003eContact us: info@stageiq.lt or +370 636 55536.\u003c\/p\u003e","brand":"Turbosound","offers":[{"title":"Default Title","offer_id":56780322177410,"sku":"4033653022392","price":756.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9736\/9730\/files\/TurbosoundiQ15.jpg?v=1784708994"},{"product_id":"turbosound-ip12b","title":"Turbosound iP12B 12-Inch Powered Subwoofer","description":"\u003ch2\u003eTurbosound iP12B 12-Inch Powered Subwoofer\u003c\/h2\u003e\n\u003cp\u003eThe Turbosound iP12B is a powered 12-inch subwoofer designed for portable sound reinforcement, music playback and speech applications.\u003c\/p\u003e\n\u003cp\u003eIts integrated multi-channel KLARK TEKNIK Class D amplification delivers up to 1,000 W: 600 W drives the internal low-frequency transducer, while two 200 W channels can power passive satellite loudspeakers. The iP12B can also support powered full-range loudspeakers through its XLR link outputs.\u003c\/p\u003e\n\u003cp\u003eA 24-bit DSP manages the active crossover, equalisation, compression and limiting. The three-channel digital mixer, LCD and push-button rotary encoder provide access to input gain, sound mode, positioning, phase and satellite output level settings.\u003c\/p\u003e\n\u003cp\u003eBluetooth supports stereo audio streaming and remote control from an iPhone or iPad. A 15 mm birch plywood enclosure, steel grille, integrated carrying handles and a 35 mm pole socket make the system suitable for frequent transport and efficient setup.\u003c\/p\u003e\n\u003ch3\u003eMain Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eA 12-inch long-excursion driver extends low-frequency reproduction down to 38 Hz.\u003c\/li\u003e\n\u003cli\u003eMulti-channel KLARK TEKNIK Class D amplification powers the subwoofer and two satellite channels from one enclosure.\u003c\/li\u003e\n\u003cli\u003eTwo 200 W amplified outputs allow direct connection of passive satellite loudspeakers.\u003c\/li\u003e\n\u003cli\u003eThe integrated three-channel digital mixer stores gain settings for repeatable setup.\u003c\/li\u003e\n\u003cli\u003eDSP presets adapt the response to the application, loudspeaker position and phase requirements.\u003c\/li\u003e\n\u003cli\u003ePeak and RMS limiters plus short-circuit, open-circuit and thermal protection safeguard the system.\u003c\/li\u003e\n\u003cli\u003eBluetooth A2DP enables wireless stereo audio streaming from compatible devices.\u003c\/li\u003e\n\u003cli\u003eAn iPhone and iPad control interface provides remote access to system settings over Bluetooth.\u003c\/li\u003e\n\u003cli\u003eThe LCD and single push-button rotary encoder simplify local configuration.\u003c\/li\u003e\n\u003cli\u003eThe birch plywood cabinet and powder-coated steel grille are built for portable use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eProduct type:\u003c\/strong\u003e powered subwoofer\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTransducer:\u003c\/strong\u003e 1 x 12-inch (305 mm) low-frequency driver\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFrequency response:\u003c\/strong\u003e 45–150 Hz (±3 dB), 38–200 Hz (-10 dB)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMaximum SPL:\u003c\/strong\u003e 120 dB\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCrossover:\u003c\/strong\u003e active, Linkwitz-Riley, 24 dB\/octave\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMaximum amplifier output power:\u003c\/strong\u003e 600 W for the subwoofer, 2 x 200 W for satellite loudspeakers\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAmplifier type:\u003c\/strong\u003e Class D\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAnalogue inputs:\u003c\/strong\u003e 2 x XLR \/ 6.3 mm TRS combo connectors\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eLink outputs:\u003c\/strong\u003e 2 x XLR\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSatellite outputs:\u003c\/strong\u003e 2 x speakON NL4, pins 1+ \/ 1-\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eInput sensitivity:\u003c\/strong\u003e +4 dBu nominal\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eInput impedance:\u003c\/strong\u003e 33 kΩ balanced, 16 kΩ unbalanced\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMaximum input level:\u003c\/strong\u003e +22 dBu\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eBluetooth:\u003c\/strong\u003e 4.0 Dual Mode, A2DP 1.2, up to 30 m without interference\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eControl:\u003c\/strong\u003e LCD, push-button rotary encoder, iOS interface over Bluetooth\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePower supply:\u003c\/strong\u003e 220–240 V~, 50\/60 Hz\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePower consumption:\u003c\/strong\u003e 110 W at 1\/8 maximum power\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eEnclosure:\u003c\/strong\u003e 15 mm birch plywood with semi-matt black finish\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e 485 x 420 x 500 mm (H x W x D)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eNet weight:\u003c\/strong\u003e 22.3 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eiP82 satellite loudspeakers, signal cables and loudspeaker cables are not included with the standalone iP12B.\u003c\/p\u003e\n\u003ch3\u003eWho Is It For\u003c\/h3\u003e\n\u003cp\u003eThe iP12B is suitable for portable and small fixed sound systems used for concerts, events, conferences and music playback. It can extend powered full-range loudspeakers or form the amplified core of a system with passive satellite loudspeakers.\u003c\/p\u003e\n\u003ch3\u003eCan’t find the Turbosound product you are looking for?\u003c\/h3\u003e\n\u003cp\u003eContact us: info@stageiq.lt or +370 636 55536.\u003c\/p\u003e","brand":"Turbosound","offers":[{"title":"Default Title","offer_id":56860028993922,"sku":"4033653103619","price":711.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9736\/9730\/files\/TurbosoundiP12B-front.jpg?v=1787216715"},{"product_id":"turbosound-ip82","title":"Turbosound iP82 Passive 2-Way 8-Inch Loudspeaker","description":"\u003ch2\u003eTurbosound iP82 Passive 2-Way Loudspeaker\u003c\/h2\u003e\n\u003cp\u003eThe Turbosound iP82 is a compact passive 2-way loudspeaker for portable and small fixed sound systems used for music and speech reinforcement.\u003c\/p\u003e\n\u003cp\u003eAn 8-inch low-frequency driver and a 1-inch compression driver operate through an internal passive crossover. The high-frequency waveguide provides 70° horizontal by 70° vertical dispersion for consistent coverage across small and medium listening areas.\u003c\/p\u003e\n\u003cp\u003eThe iP82 is designed to serve as a satellite loudspeaker with Turbosound iP12B or iP15B powered subwoofers. It can also be deployed for stage-lip, side-fill, balcony and delay-line coverage.\u003c\/p\u003e\n\u003cp\u003eThe 15 mm birch plywood bass-reflex enclosure is protected by a powder-coated perforated steel grille with acoustic foam backing. An integrated handle, 35 mm pole socket and 9.3 kg net weight support efficient transport and setup.\u003c\/p\u003e\n\u003ch3\u003eMain Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe passive 2-way design is suitable for both music and speech reproduction.\u003c\/li\u003e\n\u003cli\u003e150 W continuous and 600 W peak power handling supports compact sound reinforcement systems.\u003c\/li\u003e\n\u003cli\u003eThe 8-inch low-frequency driver uses a low-mass voice coil for improved transient response.\u003c\/li\u003e\n\u003cli\u003eA 1-inch compression driver is coupled to a low-distortion high-frequency waveguide.\u003c\/li\u003e\n\u003cli\u003e70° x 70° dispersion provides equal horizontal and vertical coverage.\u003c\/li\u003e\n\u003cli\u003eAn internal passive crossover distributes the amplified signal between both drivers.\u003c\/li\u003e\n\u003cli\u003eThe 4 Ω impedance is suitable for power amplifiers rated for this load.\u003c\/li\u003e\n\u003cli\u003eA Neutrik speakON NL4 connector provides a secure loudspeaker cable connection.\u003c\/li\u003e\n\u003cli\u003eThe 35 mm socket supports mounting on a standard loudspeaker stand or pole.\u003c\/li\u003e\n\u003cli\u003eThe birch plywood cabinet, steel grille and integrated handle suit portable operation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eProduct type:\u003c\/strong\u003e passive 2-way loudspeaker\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSystem:\u003c\/strong\u003e 2-way, bass-reflex enclosure\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eLow-frequency driver:\u003c\/strong\u003e 1 x 8-inch (203 mm)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHigh-frequency driver:\u003c\/strong\u003e 1 x 1-inch (25 mm) compression driver\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFrequency response:\u003c\/strong\u003e 70–18,000 Hz (±3 dB), 58–20,000 Hz (-10 dB)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePower handling (IEC):\u003c\/strong\u003e 150 W continuous, 600 W peak\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSensitivity:\u003c\/strong\u003e 91 dB (1 W \/ 1 m)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMaximum SPL:\u003c\/strong\u003e 113 dB continuous, 119 dB peak\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eImpedance:\u003c\/strong\u003e 4 Ω\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eNominal dispersion:\u003c\/strong\u003e 70° H x 70° V at -6 dB points\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eConnector:\u003c\/strong\u003e 1 x Neutrik speakON NL4\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eConnector wiring:\u003c\/strong\u003e pins 1+ \/ 1- input, pins 2+ \/ 2- not connected\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePole socket:\u003c\/strong\u003e 35 mm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eEnclosure:\u003c\/strong\u003e 15 mm birch plywood with semi-matt black finish\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eGrille:\u003c\/strong\u003e powder-coated perforated steel\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e 455 x 280 x 235 mm (H x W x D)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eNet weight:\u003c\/strong\u003e 9.3 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe loudspeaker is sold individually. A power amplifier, speakON cable, stand and mounting pole are not included.\u003c\/p\u003e\n\u003ch3\u003eWho Is It For\u003c\/h3\u003e\n\u003cp\u003eThe iP82 is suitable for concerts, events, conferences and small fixed sound systems. It can serve as the main loudspeaker in a compact system with an iP Series subwoofer or provide stage-lip, side-fill and delay coverage.\u003c\/p\u003e\n\u003ch3\u003eCan’t find the Turbosound product you are looking for?\u003c\/h3\u003e\n\u003cp\u003eContact us: info@stageiq.lt or +370 636 55536.\u003c\/p\u003e","brand":"Turbosound","offers":[{"title":"Default Title","offer_id":56860121268610,"sku":"4033653103961","price":215.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9736\/9730\/files\/TurbosoundiP82-front.jpg?v=1787218877"},{"product_id":"turbosound-iq15b","title":"Turbosound iQ15B Powered Subwoofer","description":"\u003ch2\u003eTurbosound iQ15B 15-Inch Powered Subwoofer\u003c\/h2\u003e\n\u003cp\u003eThe Turbosound iQ15B is a 15-inch powered subwoofer with a KLARK TEKNIK amplifier and DSP.\u003c\/p\u003e\n\u003cp\u003eIt extends the low-frequency output of full-range loudspeakers in live music, DJ and installed sound systems. The DSP menu includes alignment presets for the iQ8, iQ10, iQ12 and iQ15.\u003c\/p\u003e\n\u003cp\u003eThe built-in Class-D amplifier delivers a maximum output of 3000 W. Crossover, equalisation, phase and delay settings allow the subwoofer to be adjusted to the system, while limiting helps protect against overload.\u003c\/p\u003e\n\u003cp\u003eTwo XLR \/ 6.3 mm combination inputs accept analogue signals. The XLR outputs pass unprocessed copies of the corresponding inputs to other powered loudspeakers. ULTRANET carries digital audio between compatible devices, and USB supports DSP control from a computer and firmware updates.\u003c\/p\u003e\n\u003cp\u003eRear-panel buttons and a rotary encoder provide access to settings shown on the LCD. The birch plywood cabinet has a 35 mm pole socket, and the supplied castors make it easier to move.\u003c\/p\u003e\n\u003ch3\u003eMain Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eA 15-inch low-frequency driver extends the bass output of a full-range system.\u003c\/li\u003e\n\u003cli\u003eThe built-in amplifier removes the need for a separate power amplifier.\u003c\/li\u003e\n\u003cli\u003eDSP alignment presets simplify integration with iQ full-range loudspeakers.\u003c\/li\u003e\n\u003cli\u003eAdjustable crossover and phase settings help match the subwoofer to the system.\u003c\/li\u003e\n\u003cli\u003eUp to 300 ms of delay supports time alignment with other loudspeakers.\u003c\/li\u003e\n\u003cli\u003eULTRANET accepts digital audio from a compatible mixing console.\u003c\/li\u003e\n\u003cli\u003eThe LCD provides direct access to DSP settings at the loudspeaker.\u003c\/li\u003e\n\u003cli\u003eSupplied castors make the cabinet easier to transport.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eProduct type:\u003c\/strong\u003e powered subwoofer\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDriver:\u003c\/strong\u003e 1 x 15-inch low-frequency driver\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAmplifier:\u003c\/strong\u003e Class-D, 3000 W maximum output power\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFrequency response:\u003c\/strong\u003e 50–130 Hz (±3 dB), 40–130 Hz (-10 dB)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMaximum SPL:\u003c\/strong\u003e 130 dB peak\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAnalogue inputs:\u003c\/strong\u003e 2 x XLR \/ 6.3 mm combination sockets\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAnalogue outputs:\u003c\/strong\u003e 2 x XLR, linked to the inputs\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDigital connections:\u003c\/strong\u003e 2 x RJ45 (ULTRANET IN \/ THRU), USB\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDelay:\u003c\/strong\u003e 0–300 ms\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eEuropean mains supply:\u003c\/strong\u003e 220–240 V AC, 50\/60 Hz\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMains connections:\u003c\/strong\u003e powerCON input and link output\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eEnclosure:\u003c\/strong\u003e birch plywood, black finish, steel grille\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePole socket:\u003c\/strong\u003e 35 mm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e 602 x 445 x 495 mm (H x W x D)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 30.6 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat’s Included\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003e1 x Turbosound iQ15B powered subwoofer\u003c\/li\u003e\u003cli\u003eTransport castors\u003c\/li\u003e\u003cli\u003eRegion-appropriate mains cable\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWho Is It For\u003c\/h3\u003e\n\u003cp\u003eFor low-frequency reinforcement in live music, DJ and event sound systems. Suitable for portable or installed setups used alongside full-range loudspeakers.\u003c\/p\u003e\n\u003ch3\u003eCan’t find the Turbosound product you are looking for?\u003c\/h3\u003e\n\u003cp\u003eContact us: info@stageiq.lt or +370 636 55536.\u003c\/p\u003e","brand":"Turbosound","offers":[{"title":"Default Title","offer_id":56890440122754,"sku":"4033653022644","price":756.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9736\/9730\/files\/Turbosound-iQ15B.jpg?v=1788774573"},{"product_id":"turbosound-iq18b","title":"Turbosound iQ18B Powered Subwoofer","description":"\u003ch2\u003eTurbosound iQ18B 18-Inch Powered Subwoofer\u003c\/h2\u003e\n\u003cp\u003eThe Turbosound iQ18B is a 18-inch powered subwoofer with a KLARK TEKNIK amplifier and DSP.\u003c\/p\u003e\n\u003cp\u003eIt extends the low-frequency output of full-range loudspeakers in live music, DJ and installed sound systems. The DSP menu includes alignment presets for the iQ8, iQ10, iQ12 and iQ15.\u003c\/p\u003e\n\u003cp\u003eThe built-in Class-D amplifier delivers a maximum output of 3000 W. Crossover, equalisation, phase and delay settings allow the subwoofer to be adjusted to the system, while limiting helps protect against overload.\u003c\/p\u003e\n\u003cp\u003eTwo XLR \/ 6.3 mm combination inputs accept analogue signals. The XLR outputs pass unprocessed copies of the corresponding inputs to other powered loudspeakers. ULTRANET carries digital audio between compatible devices, and USB supports DSP control from a computer and firmware updates.\u003c\/p\u003e\n\u003cp\u003eRear-panel buttons and a rotary encoder provide access to settings shown on the LCD. The birch plywood cabinet has a 35 mm pole socket, and the supplied castors make it easier to move.\u003c\/p\u003e\n\u003ch3\u003eMain Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eA 18-inch low-frequency driver extends the bass output of a full-range system.\u003c\/li\u003e\n\u003cli\u003eThe built-in amplifier removes the need for a separate power amplifier.\u003c\/li\u003e\n\u003cli\u003eDSP alignment presets simplify integration with iQ full-range loudspeakers.\u003c\/li\u003e\n\u003cli\u003eAdjustable crossover and phase settings help match the subwoofer to the system.\u003c\/li\u003e\n\u003cli\u003eUp to 300 ms of delay supports time alignment with other loudspeakers.\u003c\/li\u003e\n\u003cli\u003eULTRANET accepts digital audio from a compatible mixing console.\u003c\/li\u003e\n\u003cli\u003eThe LCD provides direct access to DSP settings at the loudspeaker.\u003c\/li\u003e\n\u003cli\u003eSupplied castors make the cabinet easier to transport.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eProduct type:\u003c\/strong\u003e powered subwoofer\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDriver:\u003c\/strong\u003e 1 x 18-inch low-frequency driver\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAmplifier:\u003c\/strong\u003e Class-D, 3000 W maximum output power\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFrequency response:\u003c\/strong\u003e 50–100 Hz (±3 dB), 36–100 Hz (-10 dB)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMaximum SPL:\u003c\/strong\u003e 132 dB peak\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAnalogue inputs:\u003c\/strong\u003e 2 x XLR \/ 6.3 mm combination sockets\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAnalogue outputs:\u003c\/strong\u003e 2 x XLR, linked to the inputs\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDigital connections:\u003c\/strong\u003e 2 x RJ45 (ULTRANET IN \/ THRU), USB\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDelay:\u003c\/strong\u003e 0–300 ms\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eEuropean mains supply:\u003c\/strong\u003e 220–240 V AC, 50\/60 Hz\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMains connections:\u003c\/strong\u003e powerCON input and link output\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eEnclosure:\u003c\/strong\u003e birch plywood, black finish, steel grille\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePole socket:\u003c\/strong\u003e 35 mm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e 691 x 533 x 559 mm (H x W x D)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 39.8 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat’s Included\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003e1 x Turbosound iQ18B powered subwoofer\u003c\/li\u003e\u003cli\u003eTransport castors\u003c\/li\u003e\u003cli\u003eRegion-appropriate mains cable\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWho Is It For\u003c\/h3\u003e\n\u003cp\u003eFor low-frequency reinforcement in live music, DJ and event sound systems. Suitable for portable or installed setups used alongside full-range loudspeakers.\u003c\/p\u003e\n\u003ch3\u003eCan’t find the Turbosound product you are looking for?\u003c\/h3\u003e\n\u003cp\u003eContact us: info@stageiq.lt or +370 636 55536.\u003c\/p\u003e","brand":"Turbosound","offers":[{"title":"Default Title","offer_id":56890440319362,"sku":"4033653022651","price":1010.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9736\/9730\/files\/iQ18B-front.jpg?v=1788772850"},{"product_id":"turbosound-tfx122m-an","title":"Turbosound TFX122M-AN 12-Inch Powered Stage Monitor","description":"\u003ch2\u003eTurbosound TFX122M-AN 12-Inch Powered Stage Monitor\u003c\/h2\u003e\n\u003cp\u003eThe Turbosound TFX122M-AN is a powered two-way stage monitor with a 12-inch low-frequency driver.\u003c\/p\u003e\n\u003cp\u003eDesigned for floor monitoring at concerts, rehearsals and other events, it can also provide main or supplementary speech and music reinforcement. Its low-profile cabinet helps preserve audience sight lines.\u003c\/p\u003e\n\u003cp\u003eThe built-in KLARK TEKNIK Class-D amplifier delivers 1100 W maximum output power. DSP equalisation, limiting and crossover settings allow the response to be adjusted for the loudspeaker position and sound system. Buttons and a rotary encoder provide access to the settings shown on the LCD.\u003c\/p\u003e\n\u003cp\u003eA combination XLR \/ 6.3 mm input accepts analogue audio, while the XLR LINK output passes an unprocessed copy to another powered loudspeaker. ULTRANET IN and THRU connect compatible digital audio devices. USB supports DSP control from a computer and firmware updates.\u003c\/p\u003e\n\u003cp\u003eThe 12-inch low-frequency driver is paired with a 1-inch titanium-dome compression driver. Its waveguide provides 60° horizontal by 40° vertical dispersion. The 15 mm plywood cabinet includes a carrying handle and a 35 mm socket for stand mounting.\u003c\/p\u003e\n\u003ch3\u003eMain Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eA two-way system reproduces speech and music for stage monitoring.\u003c\/li\u003e\n\u003cli\u003eThe built-in amplifier removes the need for a separate power amplifier.\u003c\/li\u003e\n\u003cli\u003eDSP equalisation allows the response to be adjusted to the application.\u003c\/li\u003e\n\u003cli\u003eLimiting helps protect the drivers against overload.\u003c\/li\u003e\n\u003cli\u003eThe LCD provides direct access to settings at the loudspeaker.\u003c\/li\u003e\n\u003cli\u003eULTRANET accepts digital audio from compatible devices.\u003c\/li\u003e\n\u003cli\u003eThe XLR LINK output passes analogue audio to another powered loudspeaker.\u003c\/li\u003e\n\u003cli\u003eA 35 mm pole socket supports use for main sound reinforcement.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eProduct type:\u003c\/strong\u003e powered stage monitor\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSystem:\u003c\/strong\u003e two-way, full-range\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDrivers:\u003c\/strong\u003e 1 x 12-inch LF driver, 1 x 1-inch HF compression driver\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAmplifier:\u003c\/strong\u003e Class-D, 1100 W maximum output power\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFrequency response:\u003c\/strong\u003e 75–18 000 Hz (±3 dB), 68–20 000 Hz (-10 dB)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMaximum SPL:\u003c\/strong\u003e 125 dB peak\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDispersion:\u003c\/strong\u003e 60° H x 40° V at -6 dB points, rotatable waveguide\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAnalogue connections:\u003c\/strong\u003e 1 x XLR \/ 6.3 mm combination input, 1 x XLR LINK output\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDigital connections:\u003c\/strong\u003e 2 x RJ45 (ULTRANET IN \/ THRU), USB\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eEuropean mains supply:\u003c\/strong\u003e 220–240 V AC, 50\/60 Hz, IEC inlet\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eEnclosure:\u003c\/strong\u003e 15 mm plywood, composite end cheeks, steel grille\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePole socket:\u003c\/strong\u003e 35 mm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e 302 x 452 x 504 mm (H x W x D)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 16.9 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat’s Included\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003e1 x Turbosound TFX122M-AN powered stage monitor\u003c\/li\u003e\u003cli\u003eRegion-appropriate IEC mains cable\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWho Is It For\u003c\/h3\u003e\n\u003cp\u003eFor stage monitoring at concerts, theatres and rehearsals. It also suits speech and music reinforcement at smaller events or supplementary audience coverage within a larger system.\u003c\/p\u003e\n\u003ch3\u003eCan’t find the Turbosound product you are looking for?\u003c\/h3\u003e\n\u003cp\u003eContact us: info@stageiq.lt or +370 636 55536.\u003c\/p\u003e","brand":"Turbosound","offers":[{"title":"Default Title","offer_id":56890506445186,"sku":"4033653103879","price":447.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9736\/9730\/files\/TFX122M-AN-front-1.jpg?v=1788765048"},{"product_id":"turbosound-tfx152m-an","title":"Turbosound TFX152M-AN 15-Inch Powered Stage Monitor","description":"\u003ch2\u003eTurbosound TFX152M-AN 15-Inch Powered Stage Monitor\u003c\/h2\u003e\n\u003cp\u003eThe Turbosound TFX152M-AN is a powered two-way stage monitor with a 15-inch low-frequency driver.\u003c\/p\u003e\n\u003cp\u003eDesigned for floor monitoring at concerts, rehearsals and other events, it can also provide main or supplementary speech and music reinforcement. Its low-profile cabinet helps preserve audience sight lines.\u003c\/p\u003e\n\u003cp\u003eThe built-in KLARK TEKNIK Class-D amplifier delivers 1100 W maximum output power. DSP equalisation, limiting and crossover settings allow the response to be adjusted for the loudspeaker position and sound system. Buttons and a rotary encoder provide access to the settings shown on the LCD.\u003c\/p\u003e\n\u003cp\u003eA combination XLR \/ 6.3 mm input accepts analogue audio, while the XLR LINK output passes an unprocessed copy to another powered loudspeaker. ULTRANET IN and THRU connect compatible digital audio devices. USB supports DSP control from a computer and firmware updates.\u003c\/p\u003e\n\u003cp\u003eThe 15-inch low-frequency driver is paired with a 1-inch titanium-dome compression driver. Its waveguide provides 60° horizontal by 40° vertical dispersion. The 15 mm plywood cabinet includes a carrying handle and a 35 mm socket for stand mounting.\u003c\/p\u003e\n\u003ch3\u003eMain Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eA two-way system reproduces speech and music for stage monitoring.\u003c\/li\u003e\n\u003cli\u003eThe built-in amplifier removes the need for a separate power amplifier.\u003c\/li\u003e\n\u003cli\u003eDSP equalisation allows the response to be adjusted to the application.\u003c\/li\u003e\n\u003cli\u003eLimiting helps protect the drivers against overload.\u003c\/li\u003e\n\u003cli\u003eThe LCD provides direct access to settings at the loudspeaker.\u003c\/li\u003e\n\u003cli\u003eULTRANET accepts digital audio from compatible devices.\u003c\/li\u003e\n\u003cli\u003eThe XLR LINK output passes analogue audio to another powered loudspeaker.\u003c\/li\u003e\n\u003cli\u003eA 35 mm pole socket supports use for main sound reinforcement.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eProduct type:\u003c\/strong\u003e powered stage monitor\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSystem:\u003c\/strong\u003e two-way, full-range\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDrivers:\u003c\/strong\u003e 1 x 15-inch LF driver, 1 x 1-inch HF compression driver\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAmplifier:\u003c\/strong\u003e Class-D, 1100 W maximum output power\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFrequency response:\u003c\/strong\u003e 63–18 000 Hz (±3 dB), 57–20 000 Hz (-10 dB)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMaximum SPL:\u003c\/strong\u003e 127 dB peak\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDispersion:\u003c\/strong\u003e 60° H x 40° V at -6 dB points, rotatable waveguide\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAnalogue connections:\u003c\/strong\u003e 1 x XLR \/ 6.3 mm combination input, 1 x XLR LINK output\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDigital connections:\u003c\/strong\u003e 2 x RJ45 (ULTRANET IN \/ THRU), USB\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eEuropean mains supply:\u003c\/strong\u003e 220–240 V AC, 50\/60 Hz, IEC inlet\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eEnclosure:\u003c\/strong\u003e 15 mm plywood, composite end cheeks, steel grille\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePole socket:\u003c\/strong\u003e 35 mm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e 351 x 530 x 565 mm (H x W x D)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 21.5 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat’s Included\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003e1 x Turbosound TFX152M-AN powered stage monitor\u003c\/li\u003e\u003cli\u003eRegion-appropriate IEC mains cable\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWho Is It For\u003c\/h3\u003e\n\u003cp\u003eFor stage monitoring at concerts, theatres and rehearsals. It also suits speech and music reinforcement at smaller events or supplementary audience coverage within a larger system.\u003c\/p\u003e\n\u003ch3\u003eCan’t find the Turbosound product you are looking for?\u003c\/h3\u003e\n\u003cp\u003eContact us: info@stageiq.lt or +370 636 55536.\u003c\/p\u003e","brand":"Turbosound","offers":[{"title":"Default Title","offer_id":56890506477954,"sku":"4033653103862","price":620.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9736\/9730\/files\/Turbosound-TFX152M-AN-right.jpg?v=1788776183"},{"product_id":"turbosound-ip500-v2","title":"Turbosound iP500 V2 Powered Column Loudspeaker System","description":"\u003ch2\u003eTurbosound iP500 V2 Powered Column Loudspeaker System\u003c\/h2\u003e\n\u003cp\u003eThe Turbosound iP500 V2 is a powered column loudspeaker system with an 8-inch low-frequency driver and six 2-inch drivers in the column.\u003c\/p\u003e\n\u003cp\u003eDesigned for music and speech at smaller events, the system uses its bass module as the base for the column segments. Their connectors engage during assembly, so no separate speaker cables are required between the sections.\u003c\/p\u003e\n\u003cp\u003eThe built-in three-channel digital mixer combines two wired audio sources with Bluetooth playback. Two XLR \/ 6.3 mm combination inputs accept microphone or line-level signals. XLR LINK outputs pass the signal on to another sound system.\u003c\/p\u003e\n\u003cp\u003eKLARK TEKNIK processing, three-band equalisation and factory presets let you adjust the response to the system position and application. Built-in reverb can add ambience to vocals. Settings are accessible through the onboard LCD or remotely from a compatible iPhone or iPad.\u003c\/p\u003e\n\u003cp\u003eThe amplifier provides 600 W maximum output power, with 100° horizontal sound dispersion. The complete system weighs 15.1 kg. Its removable column sections make it easier to pack for travel between performances and rehearsals.\u003c\/p\u003e\n\u003ch3\u003eMain Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBuilt-in amplification removes the need for a separate power amplifier.\u003c\/li\u003e\n\u003cli\u003eAn 8-inch bass module complements the sound from the column drivers.\u003c\/li\u003e\n\u003cli\u003eThree mixer channels combine wired sources and Bluetooth audio.\u003c\/li\u003e\n\u003cli\u003eCombination inputs accept XLR or 6.3 mm plugs.\u003c\/li\u003e\n\u003cli\u003eBluetooth supports music playback from a compatible phone or other device.\u003c\/li\u003e\n\u003cli\u003eThree-band equalisation provides bass, midrange and treble adjustment.\u003c\/li\u003e\n\u003cli\u003eBuilt-in reverb adds ambience to vocals.\u003c\/li\u003e\n\u003cli\u003eCompatible iPhone and iPad control allows settings to be adjusted away from the system.\u003c\/li\u003e\n\u003cli\u003eColumn connectors engage as the sections are fitted, without separate signal cables.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eProduct type:\u003c\/strong\u003e powered column loudspeaker system\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSystem:\u003c\/strong\u003e two-way, full-range\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDrivers:\u003c\/strong\u003e 1 x 8-inch LF driver, 6 x 2-inch neodymium drivers\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMaximum output power:\u003c\/strong\u003e 600 W\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFrequency response:\u003c\/strong\u003e 65–14 000 Hz (±3 dB), 50–16 000 Hz (-10 dB)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMaximum SPL:\u003c\/strong\u003e 118 dB\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHorizontal dispersion:\u003c\/strong\u003e 100° at -6 dB points\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eInputs:\u003c\/strong\u003e 2 x XLR \/ 6.3 mm combination inputs, Bluetooth\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSignal outputs:\u003c\/strong\u003e XLR LINK\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMixer and DSP:\u003c\/strong\u003e 3 channels, three-band EQ, factory presets, KLARK TEKNIK reverb\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eControl:\u003c\/strong\u003e LCD and rotary encoder, compatible iOS app\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eEuropean mains supply:\u003c\/strong\u003e 220–240 V AC, 50\/60 Hz, IEC inlet\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAssembled dimensions:\u003c\/strong\u003e 2006 x 321 x 400 mm (H x W x D)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 15.1 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat’s Included\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003e1 x Turbosound iP500 V2 system: bass module and column sections\u003c\/li\u003e\u003cli\u003eProtective cover for the bass module\u003c\/li\u003e\u003cli\u003eShoulder bag for the column sections\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWho Is It For\u003c\/h3\u003e\n\u003cp\u003eFor performers, presenters and small-event organisers who need a portable system for vocals, speech and music. Suitable applications include acoustic performances, presentations and rehearsals.\u003c\/p\u003e\n\u003ch3\u003eCan’t find the Turbosound product you are looking for?\u003c\/h3\u003e\n\u003cp\u003eContact us: info@stageiq.lt or +370 636 55536.\u003c\/p\u003e","brand":"Turbosound","offers":[{"title":"Default Title","offer_id":56890518077826,"sku":"4033653108195","price":614.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9736\/9730\/files\/Image_TS_0302-ACJ_iP500-V2_Front_XL.jpg?v=1788777292"},{"product_id":"turbosound-ip1000-v2","title":"Turbosound iP1000 V2 Powered Column Loudspeaker System","description":"\u003ch2\u003eTurbosound iP1000 V2 Powered Column Loudspeaker System\u003c\/h2\u003e\n\u003cp\u003eThe Turbosound iP1000 V2 is a powered column loudspeaker system with two 8-inch low-frequency drivers, eight 2.75-inch mid-high drivers and a high-frequency compression driver.\u003c\/p\u003e\n\u003cp\u003eIts modular design supports speech and music reinforcement at events, performances and presentations. The column plugs directly into the bass module, removing the need for a separate stand or speaker cable between the sections. The 120° horizontal dispersion helps cover a wide listening area.\u003c\/p\u003e\n\u003cp\u003eA built-in three-channel digital mixer combines two wired sources with Bluetooth playback. Two XLR \/ 6.3 mm combination inputs accept microphone, instrument or line-level signals, while XLR LINK outputs pass signals to another system.\u003c\/p\u003e\n\u003cp\u003eKLARK TEKNIK DSP provides three-band equalisation, position and sound-mode presets, and reverb. Settings can be adjusted from the LCD with a rotary encoder or remotely from a compatible iPhone or iPad. Two systems can be linked for wireless stereo playback.\u003c\/p\u003e\n\u003cp\u003eThe integrated amplifier delivers 1000 W maximum output power, and maximum SPL is 122 dB. The assembled system weighs 24.8 kg and separates for transport.\u003c\/p\u003e\n\u003ch3\u003eMain Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBuilt-in amplification and mixing allow operation without a separate power amplifier.\u003c\/li\u003e\u003cli\u003eTwo 8-inch drivers reproduce the low-frequency range.\u003c\/li\u003e\u003cli\u003eEight 2.75-inch drivers and an HF compression driver provide wide column coverage.\u003c\/li\u003e\u003cli\u003eTwo combination inputs accept microphone, instrument or line-level signals.\u003c\/li\u003e\u003cli\u003eBluetooth supports wireless music playback from a compatible device.\u003c\/li\u003e\u003cli\u003eThree-band equalisation and factory presets adjust the response to the application.\u003c\/li\u003e\u003cli\u003eBuilt-in reverb adds ambience to vocals and instruments.\u003c\/li\u003e\u003cli\u003eA compatible iOS app provides control from the audience area or stage.\u003c\/li\u003e\u003cli\u003eThe column connects directly to the base without a separate signal cable.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eProduct type:\u003c\/strong\u003e powered column loudspeaker system\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSystem:\u003c\/strong\u003e four-way, active and passive\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDrivers:\u003c\/strong\u003e 2 x 8-inch LF, 8 x 2.75-inch MF, 1 x 1-inch HF compression driver\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eMaximum output power:\u003c\/strong\u003e 1000 W\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eFrequency response:\u003c\/strong\u003e 50–20,000 Hz (±3 dB), 43–20,000 Hz (-10 dB)\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eMaximum SPL:\u003c\/strong\u003e 122 dB\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eHorizontal dispersion:\u003c\/strong\u003e 120° at -6 dB points\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eInputs:\u003c\/strong\u003e 2 x XLR \/ 6.3 mm combination inputs, Bluetooth\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSignal outputs:\u003c\/strong\u003e XLR LINK\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDSP:\u003c\/strong\u003e three-band EQ, positioning and sound-mode presets, KLARK TEKNIK reverb\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eControl:\u003c\/strong\u003e LCD and rotary encoder, compatible iOS app\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eEuropean mains supply:\u003c\/strong\u003e 220–240 V AC, 50\/60 Hz, IEC inlet\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eAssembled dimensions:\u003c\/strong\u003e 1955 x 262 x 370 mm (H x W x D)\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 24.8 kg\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWhat’s Included\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e1 x Turbosound iP1000 V2 system: bass module and column section\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWho Is It For\u003c\/h3\u003e\u003cp\u003eFor performers, presenters, corporate events and organisers who need a modular system for music, speech and vocals.\u003c\/p\u003e\n\u003ch3\u003eCan’t find the Turbosound product you are looking for?\u003c\/h3\u003e\u003cp\u003eContact us: info@stageiq.lt or +370 636 55536.\u003c\/p\u003e","brand":"Turbosound","offers":[{"title":"Default Title","offer_id":56892351578498,"sku":"4033653108225","price":676.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9736\/9730\/files\/Turbosound-iP1000.jpg?v=1788777905"},{"product_id":"turbosound-pq10","title":"Turbosound PQ10 10-Inch Passive Two-Way Loudspeaker","description":"\u003ch2\u003eTurbosound PQ10 10-Inch Passive Two-Way Loudspeaker\u003c\/h2\u003e\n\u003cp\u003eThe Turbosound PQ10 is a passive two-way loudspeaker with a 10-inch low-frequency driver and a 1-inch neodymium high-frequency compression driver.\u003c\/p\u003e\n\u003cp\u003eIt is designed for professional speech and music reinforcement, stage monitoring, delay coverage and installed systems. Its rotatable waveguide provides 80° horizontal by 50° vertical dispersion, allowing the pattern orientation to suit vertical or horizontal cabinet placement.\u003c\/p\u003e\n\u003cp\u003eThe passive PQ Series requires a supported Lab Gruppen amplifier and the matching manufacturer Lake DSP preset. One amplifier and DSP channel is required per loudspeaker in normal operation. PQ10, PQ12 and PQ15 models must not share the same amplifier and DSP circuit.\u003c\/p\u003e\n\u003cp\u003eTwo parallel NL4 connectors accept the speaker-level input and pass it to another enclosure. Two 35 mm sockets provide straight or downward-tilted pole positions. Integrated M10 points support professional installation with suitable accessories sold separately.\u003c\/p\u003e\n\u003cp\u003eThe 15 mm plywood cabinet has a steel grille and an integrated handle. Angled cabinet panels and two sets of feet allow floor placement as a stage monitor.\u003c\/p\u003e\n\u003ch3\u003eMain Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eA two-way system reproduces speech and music for professional sound reinforcement.\u003c\/li\u003e\u003cli\u003eThe 10-inch LF driver is paired with a neodymium HF compression driver.\u003c\/li\u003e\u003cli\u003eAn 80° x 50° rotatable waveguide allows the coverage orientation to be changed.\u003c\/li\u003e\u003cli\u003eLake DSP presets configure the amplifier for the specific PQ model.\u003c\/li\u003e\u003cli\u003eTwo NL4 connectors accept and link the speaker-level signal.\u003c\/li\u003e\u003cli\u003eTwo 35 mm sockets offer straight or downward-tilted pole positions.\u003c\/li\u003e\u003cli\u003eM10 mounting points accept compatible professional installation accessories.\u003c\/li\u003e\u003cli\u003eThe cabinet can be placed on the floor as a stage monitor.\u003c\/li\u003e\u003cli\u003eAn integrated handle assists transport.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eProduct type:\u003c\/strong\u003e passive two-way loudspeaker\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDrivers:\u003c\/strong\u003e 1 x 10-inch LF, 1 x 1-inch neodymium HF compression driver\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePower handling:\u003c\/strong\u003e LF 350 W continuous \/ 1400 W peak, HF 50 W continuous \/ 200 W peak\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eFrequency response:\u003c\/strong\u003e 80–20000 Hz (±3 dB), 50–20000 Hz (-10 dB)\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eMaximum SPL:\u003c\/strong\u003e 128 dB, 134 dB peak\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSensitivity:\u003c\/strong\u003e 96 dB (1 W \/ 1 m)\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eNominal impedance:\u003c\/strong\u003e 8 Ω\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDispersion:\u003c\/strong\u003e 80° H x 50° V at -6 dB points, rotatable waveguide\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eConnections:\u003c\/strong\u003e 2 x NL4 input \/ link\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePole sockets:\u003c\/strong\u003e 2 x 35 mm, straight and tilted\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eEnclosure:\u003c\/strong\u003e 15 mm plywood, steel grille\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e 545 x 340 x 320 mm (H x W x D)\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 17.8 kg\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWhat’s Included\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e1 x Turbosound PQ10 passive loudspeaker\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWho Is It For\u003c\/h3\u003e\u003cp\u003eFor professional mobile and installed systems, stage monitoring, main sound reinforcement and delay coverage. A compatible Lab Gruppen amplifier and manufacturer DSP preset are required.\u003c\/p\u003e\n\u003ch3\u003eCan’t find the Turbosound product you are looking for?\u003c\/h3\u003e\u003cp\u003eContact us: info@stageiq.lt or +370 636 55536.\u003c\/p\u003e","brand":"Turbosound","offers":[{"title":"Default Title","offer_id":56892351611266,"sku":"4033653231954","price":712.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9736\/9730\/files\/turbosound-pq10-pasyvi-garso-kolonele-perspektyva.jpg?v=1788778999"},{"product_id":"turbosound-pq12","title":"Turbosound PQ12 12-Inch Passive Two-Way Loudspeaker","description":"\u003ch2\u003eTurbosound PQ12 12-Inch Passive Two-Way Loudspeaker\u003c\/h2\u003e\n\u003cp\u003eThe Turbosound PQ12 is a passive two-way loudspeaker with a 12-inch low-frequency driver and a 1-inch neodymium high-frequency compression driver.\u003c\/p\u003e\n\u003cp\u003eIt is designed for professional speech and music reinforcement, stage monitoring, delay coverage and installed systems. Its rotatable waveguide provides 80° horizontal by 50° vertical dispersion, allowing the pattern orientation to suit vertical or horizontal cabinet placement.\u003c\/p\u003e\n\u003cp\u003eThe passive PQ Series requires a supported Lab Gruppen amplifier and the matching manufacturer Lake DSP preset. One amplifier and DSP channel is required per loudspeaker in normal operation. PQ10, PQ12 and PQ15 models must not share the same amplifier and DSP circuit.\u003c\/p\u003e\n\u003cp\u003eTwo parallel NL4 connectors accept the speaker-level input and pass it to another enclosure. Two 35 mm sockets provide straight or downward-tilted pole positions. Integrated M10 points support professional installation with suitable accessories sold separately.\u003c\/p\u003e\n\u003cp\u003eThe 15 mm plywood cabinet has a steel grille and an integrated handle. Angled cabinet panels and two sets of feet allow floor placement as a stage monitor.\u003c\/p\u003e\n\u003ch3\u003eMain Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eA two-way system reproduces speech and music for professional sound reinforcement.\u003c\/li\u003e\u003cli\u003eThe 12-inch LF driver is paired with a neodymium HF compression driver.\u003c\/li\u003e\u003cli\u003eAn 80° x 50° rotatable waveguide allows the coverage orientation to be changed.\u003c\/li\u003e\u003cli\u003eLake DSP presets configure the amplifier for the specific PQ model.\u003c\/li\u003e\u003cli\u003eTwo NL4 connectors accept and link the speaker-level signal.\u003c\/li\u003e\u003cli\u003eTwo 35 mm sockets offer straight or downward-tilted pole positions.\u003c\/li\u003e\u003cli\u003eM10 mounting points accept compatible professional installation accessories.\u003c\/li\u003e\u003cli\u003eThe cabinet can be placed on the floor as a stage monitor.\u003c\/li\u003e\u003cli\u003eAn integrated handle assists transport.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eProduct type:\u003c\/strong\u003e passive two-way loudspeaker\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDrivers:\u003c\/strong\u003e 1 x 12-inch LF, 1 x 1-inch neodymium HF compression driver\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePower handling:\u003c\/strong\u003e LF 500 W continuous \/ 2000 W peak, HF 50 W continuous \/ 200 W peak\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eFrequency response:\u003c\/strong\u003e 74–20000 Hz (±3 dB), 49–20000 Hz (-10 dB)\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eMaximum SPL:\u003c\/strong\u003e 131 dB, 137 dB peak\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSensitivity:\u003c\/strong\u003e 98 dB (1 W \/ 1 m)\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eNominal impedance:\u003c\/strong\u003e 8 Ω\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDispersion:\u003c\/strong\u003e 80° H x 50° V at -6 dB points, rotatable waveguide\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eConnections:\u003c\/strong\u003e 2 x NL4 input \/ link\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePole sockets:\u003c\/strong\u003e 2 x 35 mm, straight and tilted\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eEnclosure:\u003c\/strong\u003e 15 mm plywood, steel grille\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e 630 x 373 x 329 mm (H x W x D)\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 23.6 kg\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWhat’s Included\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e1 x Turbosound PQ12 passive loudspeaker\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWho Is It For\u003c\/h3\u003e\u003cp\u003eFor professional mobile and installed systems, stage monitoring, main sound reinforcement and delay coverage. A compatible Lab Gruppen amplifier and manufacturer DSP preset are required.\u003c\/p\u003e\n\u003ch3\u003eCan’t find the Turbosound product you are looking for?\u003c\/h3\u003e\u003cp\u003eContact us: info@stageiq.lt or +370 636 55536.\u003c\/p\u003e","brand":"Turbosound","offers":[{"title":"Default Title","offer_id":56892351644034,"sku":"4033653232272","price":807.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9736\/9730\/files\/turbosound-pq12-pasyvi-garso-kolonele-perspektyva.jpg?v=1788779103"},{"product_id":"turbosound-pq15","title":"Turbosound PQ15 15-Inch Passive Two-Way Loudspeaker","description":"\u003ch2\u003eTurbosound PQ15 15-Inch Passive Two-Way Loudspeaker\u003c\/h2\u003e\n\u003cp\u003eThe Turbosound PQ15 is a passive two-way loudspeaker with a 15-inch low-frequency driver and a 1-inch neodymium high-frequency compression driver.\u003c\/p\u003e\n\u003cp\u003eIt is designed for professional speech and music reinforcement, stage monitoring, delay coverage and installed systems. Its rotatable waveguide provides 80° horizontal by 50° vertical dispersion, allowing the pattern orientation to suit vertical or horizontal cabinet placement.\u003c\/p\u003e\n\u003cp\u003eThe passive PQ Series requires a supported Lab Gruppen amplifier and the matching manufacturer Lake DSP preset. One amplifier and DSP channel is required per loudspeaker in normal operation. PQ10, PQ12 and PQ15 models must not share the same amplifier and DSP circuit.\u003c\/p\u003e\n\u003cp\u003eTwo parallel NL4 connectors accept the speaker-level input and pass it to another enclosure. Two 35 mm sockets provide straight or downward-tilted pole positions. Integrated M10 points support professional installation with suitable accessories sold separately.\u003c\/p\u003e\n\u003cp\u003eThe 15 mm plywood cabinet has a steel grille and an integrated handle. Angled cabinet panels and two sets of feet allow floor placement as a stage monitor.\u003c\/p\u003e\n\u003ch3\u003eMain Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eA two-way system reproduces speech and music for professional sound reinforcement.\u003c\/li\u003e\u003cli\u003eThe 15-inch LF driver is paired with a neodymium HF compression driver.\u003c\/li\u003e\u003cli\u003eAn 80° x 50° rotatable waveguide allows the coverage orientation to be changed.\u003c\/li\u003e\u003cli\u003eLake DSP presets configure the amplifier for the specific PQ model.\u003c\/li\u003e\u003cli\u003eTwo NL4 connectors accept and link the speaker-level signal.\u003c\/li\u003e\u003cli\u003eTwo 35 mm sockets offer straight or downward-tilted pole positions.\u003c\/li\u003e\u003cli\u003eM10 mounting points accept compatible professional installation accessories.\u003c\/li\u003e\u003cli\u003eThe cabinet can be placed on the floor as a stage monitor.\u003c\/li\u003e\u003cli\u003eAn integrated handle assists transport.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eProduct type:\u003c\/strong\u003e passive two-way loudspeaker\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDrivers:\u003c\/strong\u003e 1 x 15-inch LF, 1 x 1-inch neodymium HF compression driver\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePower handling:\u003c\/strong\u003e LF 500 W continuous \/ 2000 W peak, HF 50 W continuous \/ 200 W peak\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eFrequency response:\u003c\/strong\u003e 70–20000 Hz (±3 dB), 45–20000 Hz (-10 dB)\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eMaximum SPL:\u003c\/strong\u003e 133 dB, 138 dB peak\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSensitivity:\u003c\/strong\u003e 99 dB (1 W \/ 1 m)\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eNominal impedance:\u003c\/strong\u003e 8 Ω\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDispersion:\u003c\/strong\u003e 80° H x 50° V at -6 dB points, rotatable waveguide\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eConnections:\u003c\/strong\u003e 2 x NL4 input \/ link\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePole sockets:\u003c\/strong\u003e 2 x 35 mm, straight and tilted\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eEnclosure:\u003c\/strong\u003e 15 mm plywood, steel grille\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e 712 x 430 x 383 mm (H x W x D)\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 27.0 kg\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWhat’s Included\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e1 x Turbosound PQ15 passive loudspeaker\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWho Is It For\u003c\/h3\u003e\u003cp\u003eFor professional mobile and installed systems, stage monitoring, main sound reinforcement and delay coverage. A compatible Lab Gruppen amplifier and manufacturer DSP preset are required.\u003c\/p\u003e\n\u003ch3\u003eCan’t find the Turbosound product you are looking for?\u003c\/h3\u003e\u003cp\u003eContact us: info@stageiq.lt or +370 636 55536.\u003c\/p\u003e","brand":"Turbosound","offers":[{"title":"Default Title","offer_id":56892351676802,"sku":"4033653032742","price":953.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9736\/9730\/files\/turbosound-pq15-pasyvi-garso-kolonele-perspektyva.jpg?v=1788779231"},{"product_id":"turbosound-pq18b","title":"Turbosound PQ18B 18-Inch Passive Subwoofer","description":"\u003ch2\u003eTurbosound PQ18B 18-Inch Passive Subwoofer\u003c\/h2\u003e\n\u003cp\u003eThe Turbosound PQ18B is a passive subwoofer with a single 18-inch ferrite driver in a bass-reflex enclosure.\u003c\/p\u003e\n\u003cp\u003eDesigned for professional mobile, touring and installed systems, it extends the low-frequency output of PQ Series full-range loudspeakers. The enclosure supports conventional placement and manufacturer-defined directional bass configurations.\u003c\/p\u003e\n\u003cp\u003eThe PQ18B requires a supported Lab Gruppen amplifier and the matching manufacturer Lake DSP preset. One amplifier and DSP channel is required per enclosure in normal operation, while directional configurations can require additional channels.\u003c\/p\u003e\n\u003cp\u003eRear NL4 connectors provide input, link and pin-swap functions. A front NL4 connector supports tidy cable routing in directional configurations. A 35 mm M20 socket accepts a pole for a compatible full-range loudspeaker.\u003c\/p\u003e\n\u003cp\u003eThe 15 and 18 mm plywood enclosure includes a steel grille, integrated handles and interlocking feet for vertical or horizontal placement. An optional wheel kit can assist transport.\u003c\/p\u003e\n\u003ch3\u003eMain Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAn 18-inch driver extends the low-frequency response of a professional sound system.\u003c\/li\u003e\u003cli\u003e700 W continuous and 2800 W peak power handling suit touring applications.\u003c\/li\u003e\u003cli\u003eLake DSP presets configure a supported Lab Gruppen amplifier for the PQ18B.\u003c\/li\u003e\u003cli\u003eRear NL4 connectors provide input, link and pin-swap functions.\u003c\/li\u003e\u003cli\u003eA front NL4 connector simplifies cable routing in directional configurations.\u003c\/li\u003e\u003cli\u003eThe 35 mm M20 socket accepts a pole for a compatible loudspeaker.\u003c\/li\u003e\u003cli\u003eThe enclosure supports vertical or horizontal placement.\u003c\/li\u003e\u003cli\u003eIntegrated handles assist transport.\u003c\/li\u003e\u003cli\u003eAn IP44 rating provides protection under the manufacturer’s specified conditions.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eProduct type:\u003c\/strong\u003e passive bass-reflex subwoofer\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDriver:\u003c\/strong\u003e 1 x 18-inch ferrite LF driver, 4-inch copper voice coil\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePower handling:\u003c\/strong\u003e 700 W continuous, 2800 W peak\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eFrequency response:\u003c\/strong\u003e 45–200 Hz (±3 dB), 32–3000 Hz (-10 dB)\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eMaximum SPL:\u003c\/strong\u003e 133 dB, 138 dB peak\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSensitivity:\u003c\/strong\u003e 99 dB (1 W \/ 1 m)\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eNominal impedance:\u003c\/strong\u003e 8 Ω\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDispersion:\u003c\/strong\u003e omnidirectional\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eConnections:\u003c\/strong\u003e 3 x rear NL4, 1 x front NL4\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePole socket:\u003c\/strong\u003e 35 mm with M20 thread\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eEnclosure:\u003c\/strong\u003e 15 and 18 mm plywood, steel grille\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eProtection rating:\u003c\/strong\u003e IP44\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e 520 x 660 x 687 mm (H x W x D)\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 47.9 kg\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWhat’s Included\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e1 x Turbosound PQ18B passive subwoofer\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWho Is It For\u003c\/h3\u003e\u003cp\u003eFor professional touring, mobile and installed systems requiring increased low-frequency sound pressure. A compatible Lab Gruppen amplifier and manufacturer DSP preset are required.\u003c\/p\u003e\n\u003ch3\u003eCan’t find the Turbosound product you are looking for?\u003c\/h3\u003e\u003cp\u003eContact us: info@stageiq.lt or +370 636 55536.\u003c\/p\u003e","brand":"Turbosound","offers":[{"title":"Default Title","offer_id":56892351742338,"sku":"4033653032803","price":953.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9736\/9730\/files\/turbosound-pq18b-pasyvus-zemu-dazniu-garsiakalbis-priekis.jpg?v=1788779318"}],"url":"https:\/\/stageiq.lt\/en\/collections\/turbosound.oembed?page=2","provider":"STAGE IQ","version":"1.0","type":"link"}