{"title":"KRK Systems","description":"\u003cp\u003eKRK Systems yra JAV profesionalios studijinės garso įrangos gamintojas, labiausiai žinomas dėl aktyvių studijinių monitorių su išskirtiniais geltonais garsiakalbiais. Nuo 1986 metų kuriama KRK įranga tapo plačiai naudojama namų ir profesionaliose studijose visame pasaulyje. Gamintojo asortimente taip pat yra studijinės žemųjų dažnių kolonėlės, ausinės ir kompaktiškos monitorių sistemos.\u003c\/p\u003e","products":[{"product_id":"krk-kreate-3-studio-monitor","title":"KRK KREATE 3 Studio Monitor Pair","description":"\u003ch2\u003eKRK KREATE 3 Studio Monitor Pair\u003c\/h2\u003e\n\u003cp\u003eThe KRK KREATE 3 studio monitor pair is designed for music production, recording, mixing, content creation, and listening in compact studios and creative workspaces.\u003c\/p\u003e\n\u003cp\u003eThis two-way bass reflex system consists of an active left monitor and a passive right monitor. Each enclosure features a 3.5-inch low-frequency driver with a woven glass-fibre composite cone and a 0.75-inch textile-dome high-frequency driver with a neodymium magnet. The system delivers a frequency response of 70 Hz–33 kHz.\u003c\/p\u003e\n\u003cp\u003eA Class D amplifier integrated into the active left monitor provides 65 W of total power for both monitors. The passive right monitor connects using the included four-pin locking interconnection cable, allowing the complete system to operate from a single AC outlet.\u003c\/p\u003e\n\u003cp\u003eThe high- and low-frequency levels can be adjusted by ±2 dB. These controls help adapt the system to room acoustics, placement near walls, and individual listening requirements. The system level control and all input connections are located on the rear panel of the active left monitor.\u003c\/p\u003e\n\u003cp\u003eBalanced 1\/4-inch TRS, RCA, and 1\/8-inch stereo AUX inputs accommodate audio interfaces, mixing consoles, computers, mobile devices, and other audio sources. Bluetooth 5.3 A2DP provides wireless audio streaming from compatible devices. The system can automatically enter standby mode after 30 minutes without use.\u003c\/p\u003e\n\u003ch3\u003eMain Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCompact studio monitor pair designed for nearfield listening in small studios and creative workspaces\u003c\/li\u003e\n\u003cli\u003eActive left and passive right monitor configuration allows the complete system to operate from a single AC outlet\u003c\/li\u003e\n\u003cli\u003e3.5-inch low-frequency drivers with woven glass-fibre composite cones provide controlled diaphragm performance\u003c\/li\u003e\n\u003cli\u003e0.75-inch textile-dome high-frequency drivers with neodymium magnets extend the frequency response up to 33 kHz\u003c\/li\u003e\n\u003cli\u003eClass D amplification delivers 65 W of total power across both monitors\u003c\/li\u003e\n\u003cli\u003e±2 dB high- and low-frequency controls help adapt the system to room acoustics and monitor placement\u003c\/li\u003e\n\u003cli\u003eBalanced 1\/4-inch TRS, RCA, and 1\/8-inch stereo AUX inputs provide flexible wired connectivity\u003c\/li\u003e\n\u003cli\u003eBluetooth 5.3 A2DP supports wireless audio streaming from compatible computers, mobile devices, and media players\u003c\/li\u003e\n\u003cli\u003eAutomatic standby mode reduces energy consumption when the system remains unused for more than 30 minutes\u003c\/li\u003e\n\u003cli\u003eProtective grilles help shield the high-frequency driver diaphragms from accidental damage\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eProduct type:\u003c\/strong\u003e studio monitor pair\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSystem configuration:\u003c\/strong\u003e active left monitor and passive right monitor\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSystem:\u003c\/strong\u003e two-way bass reflex\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eLow-frequency driver:\u003c\/strong\u003e 3.5-inch woven glass-fibre composite cone, ferrite magnet\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHigh-frequency driver:\u003c\/strong\u003e 0.75-inch textile dome, neodymium magnet\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFrequency response (±3 dB):\u003c\/strong\u003e 70 Hz–33 kHz\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eLow-frequency extension (-10 dB):\u003c\/strong\u003e 63 Hz\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCrossover frequency:\u003c\/strong\u003e 3.06 kHz\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAmplifier configuration:\u003c\/strong\u003e Class D\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eLeft-channel amplifier power:\u003c\/strong\u003e 32.5 W\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eRight-channel amplifier power:\u003c\/strong\u003e 32.5 W\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTotal power:\u003c\/strong\u003e 65 W\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTotal dynamic power:\u003c\/strong\u003e 130 W\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMaximum SPL:\u003c\/strong\u003e 104 dB per pair\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCoverage angles:\u003c\/strong\u003e 147° horizontal × 70° vertical\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHigh-frequency adjustment:\u003c\/strong\u003e -2 \/ 0 \/ +2 dB\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eLow-frequency adjustment:\u003c\/strong\u003e -2 \/ 0 \/ +2 dB\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAnalogue inputs:\u003c\/strong\u003e balanced 1\/4-inch TRS, RCA, 1\/8-inch stereo AUX\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWireless connectivity:\u003c\/strong\u003e Bluetooth Classic 5.3 A2DP\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSignal-to-noise ratio:\u003c\/strong\u003e \u0026gt;95.7 dB\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAC input voltage:\u003c\/strong\u003e 100–240 V AC (±10%), 50\/60 Hz\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFuse:\u003c\/strong\u003e T4AL\/250 V, not user-serviceable\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eEnclosure construction:\u003c\/strong\u003e PVC vinyl-wrapped MDF\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eBaffle construction:\u003c\/strong\u003e MDF with a reinforced high-impact polystyrene faceplate\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDimensions per monitor:\u003c\/strong\u003e 205 × 140 × 159 mm (H × W × D)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePair weight:\u003c\/strong\u003e 4.5 kg\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePackaged dimensions:\u003c\/strong\u003e 318 × 381 × 235 mm (H × W × D)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePackaged weight:\u003c\/strong\u003e 5.5 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat’s Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eKRK KREATE 3 active left studio monitor\u003c\/li\u003e\n\u003cli\u003eKRK KREATE 3 passive right studio monitor\u003c\/li\u003e\n\u003cli\u003eFour-pin locking monitor interconnection cable\u003c\/li\u003e\n\u003cli\u003eAC power cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWho Is It For\u003c\/h3\u003e\n\u003cp\u003eThe KRK KREATE 3 is designed for musicians, audio engineers, producers, and content creators who need a compact nearfield monitoring system for music production, recording, mixing, video or podcast audio work, and everyday listening.\u003c\/p\u003e\n\u003ch3\u003eCan’t find the KRK product you are looking for?\u003c\/h3\u003e\n\u003cp\u003eContact us: info@stageiq.lt or +370 636 55536.\u003c\/p\u003e","brand":"KRK","offers":[{"title":"Default Title","offer_id":56821862596994,"sku":"L0840005","price":154.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9736\/9730\/files\/imgi_63_K3.5BT_FrontAngledDuo.jpg?v=1785833883"},{"product_id":"krk-kreate-5","title":"KRK KREATE 5 Active Studio Monitor","description":"\u003ch2\u003eKRK KREATE 5 Active Studio Monitor\u003c\/h2\u003e\n\u003cp\u003eThe KRK KREATE 5 active studio monitor is designed for music production, recording, mixing, content creation, and accurate sound reproduction in studio environments.\u003c\/p\u003e\n\u003cp\u003eThis two-way bass reflex system features a 5-inch low-frequency driver with a woven glass-fibre composite cone and a 1-inch textile-dome high-frequency driver with a neodymium magnet. The monitor delivers a frequency response of 58 Hz–40 kHz and a maximum SPL of 105 dB.\u003c\/p\u003e\n\u003cp\u003eThe bi-amplified design uses a 45 W Class D amplifier for the low-frequency driver and a 15 W Class A\/B amplifier for the high-frequency driver. Total amplifier power is 60 W, while the total dynamic power output reaches 128 W.\u003c\/p\u003e\n\u003cp\u003eThe high-frequency level can be adjusted from -2 to +1 dB, while the low-frequency level can be adjusted from -2 to +2 dB. These controls help adapt the monitor to room acoustics, placement near walls, and individual listening requirements.\u003c\/p\u003e\n\u003cp\u003eA balanced XLR \/ 1\/4-inch TRS combination input accommodates audio interfaces, mixing consoles, and other professional audio equipment, while an unbalanced RCA input provides an additional connection option. Bluetooth 5.3 TWS A2DP supports wireless audio streaming and allows two KREATE 5 monitors to be linked as a wireless stereo system. Each KREATE 5 monitor is sold separately.\u003c\/p\u003e\n\u003ch3\u003eMain Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTwo-way active studio monitor designed for music production, recording, mixing, and content creation\u003c\/li\u003e\n\u003cli\u003e5-inch low-frequency driver with a woven glass-fibre composite cone provides controlled diaphragm performance\u003c\/li\u003e\n\u003cli\u003e1-inch textile-dome high-frequency driver with a neodymium magnet extends the frequency response up to 40 kHz\u003c\/li\u003e\n\u003cli\u003eSeparate low- and high-frequency amplifier circuits efficiently drive both transducers\u003c\/li\u003e\n\u003cli\u003e60 W of total amplifier power and 128 W of dynamic power provide suitable headroom for studio work\u003c\/li\u003e\n\u003cli\u003eAdjustable high-frequency level helps adapt the response to brighter or more acoustically damped rooms\u003c\/li\u003e\n\u003cli\u003eLow-frequency adjustment helps compensate for placement near walls and other hard surfaces\u003c\/li\u003e\n\u003cli\u003eBalanced XLR \/ 1\/4-inch TRS combination and unbalanced RCA inputs provide flexible wired connectivity\u003c\/li\u003e\n\u003cli\u003eBluetooth 5.3 TWS A2DP supports wireless audio streaming and stereo linking between two KREATE 5 monitors\u003c\/li\u003e\n\u003cli\u003eAutomatic standby mode reduces energy consumption when the monitor remains unused for more than 30 minutes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eProduct type:\u003c\/strong\u003e active studio monitor\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSystem:\u003c\/strong\u003e two-way bass reflex\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eLow-frequency driver:\u003c\/strong\u003e 5-inch woven glass-fibre composite cone, ferrite magnet\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHigh-frequency driver:\u003c\/strong\u003e 1-inch textile dome, neodymium magnet\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFrequency response (±3 dB):\u003c\/strong\u003e 58 Hz–40 kHz\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eLow-frequency extension (-10 dB):\u003c\/strong\u003e 46 Hz\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCrossover frequency:\u003c\/strong\u003e 2.56 kHz\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAmplifier configuration:\u003c\/strong\u003e bi-amplified\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eLow-frequency amplifier:\u003c\/strong\u003e Class D, 45 W\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHigh-frequency amplifier:\u003c\/strong\u003e Class A\/B, 15 W\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTotal power:\u003c\/strong\u003e 60 W\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTotal dynamic power:\u003c\/strong\u003e 128 W\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMaximum SPL:\u003c\/strong\u003e 105 dB\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCoverage angles:\u003c\/strong\u003e 135° horizontal × 90° vertical\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHigh-frequency adjustment:\u003c\/strong\u003e -2 \/ -1 \/ 0 \/ +1 dB\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eLow-frequency adjustment:\u003c\/strong\u003e -2 \/ -1 \/ 0 \/ +2 dB\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAnalogue inputs:\u003c\/strong\u003e balanced XLR \/ 1\/4-inch TRS combination input, unbalanced RCA input\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWireless connectivity:\u003c\/strong\u003e Bluetooth Classic 5.3 TWS A2DP\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSignal-to-noise ratio:\u003c\/strong\u003e \u0026gt;94 dB\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAC input voltage:\u003c\/strong\u003e 100–240 V AC (±10%), 50\/60 Hz\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFuse:\u003c\/strong\u003e T4AL\/250 V, not user-serviceable\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eEnclosure construction:\u003c\/strong\u003e PVC vinyl-wrapped MDF\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eBaffle construction:\u003c\/strong\u003e MDF with a reinforced high-impact polystyrene faceplate\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e 259 × 185 × 229 mm (H × W × D)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 4.3 kg\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePackaged dimensions:\u003c\/strong\u003e 375 × 305 × 267 mm (H × W × D)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePackaged weight:\u003c\/strong\u003e 5.2 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat’s Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eKRK KREATE 5 active studio monitor\u003c\/li\u003e\n\u003cli\u003eAC power cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eOne monitor is included. A stereo monitoring system requires two separately purchased KRK KREATE 5 monitors.\u003c\/p\u003e\n\u003ch3\u003eWho Is It For\u003c\/h3\u003e\n\u003cp\u003eThe KRK KREATE 5 is designed for musicians, audio engineers, producers, and content creators who need an active studio monitor for music production, recording, mixing, and other audio work. Two KREATE 5 monitors can be used as a conventional wired stereo pair or linked as a wireless stereo system via Bluetooth TWS.\u003c\/p\u003e\n\u003ch3\u003eCan’t find the KRK product you are looking for?\u003c\/h3\u003e\n\u003cp\u003eContact us: info@stageiq.lt or +370 636 55536.\u003c\/p\u003e","brand":"KRK","offers":[{"title":"Default Title","offer_id":56821899985282,"sku":"L0840006","price":140.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9736\/9730\/files\/imgi_60_K5BT_FrontAngled.jpg?v=1785834457"},{"product_id":"krk-kreate-8","title":"KRK KREATE 8 Active Studio Monitor","description":"\u003ch2\u003eKRK KREATE 8 Active Studio Monitor\u003c\/h2\u003e\n\u003cp\u003eThe KRK KREATE 8 active studio monitor is designed for music production, recording, mixing, content creation, and accurate sound reproduction in studio environments.\u003c\/p\u003e\n\u003cp\u003eThis two-way bass reflex system features an 8-inch low-frequency driver with a woven glass-fibre composite cone and a 1-inch textile-dome high-frequency driver with a neodymium magnet. The monitor delivers a frequency response of 48 Hz–40 kHz, with low-frequency extension down to 40 Hz at -10 dB.\u003c\/p\u003e\n\u003cp\u003eThe bi-amplified design uses an 80 W Class D amplifier for the low-frequency driver and a 20 W Class A\/B amplifier for the high-frequency driver. Total amplifier power is 100 W, total dynamic power reaches 210 W, and the maximum SPL is 111 dB.\u003c\/p\u003e\n\u003cp\u003eThe high-frequency level can be adjusted from -2 to +1 dB, while the low-frequency level can be adjusted from -2 to +2 dB. These controls help adapt the monitor to room acoustics, placement near walls, and individual listening requirements.\u003c\/p\u003e\n\u003cp\u003eA balanced XLR \/ 1\/4-inch TRS combination input accommodates audio interfaces, mixing consoles, and other professional audio equipment, while an unbalanced RCA input provides an additional connection option. Bluetooth 5.3 TWS A2DP supports wireless audio streaming and allows two KREATE 8 monitors to be linked as a wireless stereo system. Each KREATE 8 monitor is sold separately.\u003c\/p\u003e\n\u003ch3\u003eMain Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTwo-way active studio monitor designed for music production, recording, mixing, and content creation\u003c\/li\u003e\n\u003cli\u003e8-inch low-frequency driver with a woven glass-fibre composite cone extends the low-frequency response down to 40 Hz at -10 dB\u003c\/li\u003e\n\u003cli\u003e1-inch textile-dome high-frequency driver with a neodymium magnet extends the frequency response up to 40 kHz\u003c\/li\u003e\n\u003cli\u003eSeparate low- and high-frequency amplifier circuits efficiently drive both transducers\u003c\/li\u003e\n\u003cli\u003e100 W of total amplifier power and 210 W of dynamic power provide suitable headroom for studio work\u003c\/li\u003e\n\u003cli\u003eMaximum SPL of 111 dB supports high-level monitoring\u003c\/li\u003e\n\u003cli\u003eAdjustable high-frequency level helps adapt the response to brighter or more acoustically damped rooms\u003c\/li\u003e\n\u003cli\u003eLow-frequency adjustment helps compensate for placement near walls and other hard surfaces\u003c\/li\u003e\n\u003cli\u003eBalanced XLR \/ 1\/4-inch TRS combination and unbalanced RCA inputs provide flexible wired connectivity\u003c\/li\u003e\n\u003cli\u003eBluetooth 5.3 TWS A2DP supports wireless audio streaming and stereo linking between two KREATE 8 monitors\u003c\/li\u003e\n\u003cli\u003eAutomatic standby mode reduces energy consumption when the monitor remains unused for more than 30 minutes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eProduct type:\u003c\/strong\u003e active studio monitor\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSystem:\u003c\/strong\u003e two-way bass reflex\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eLow-frequency driver:\u003c\/strong\u003e 8-inch woven glass-fibre composite cone, ferrite magnet\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHigh-frequency driver:\u003c\/strong\u003e 1-inch textile dome, neodymium magnet\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFrequency response (±3 dB):\u003c\/strong\u003e 48 Hz–40 kHz\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eLow-frequency extension (-10 dB):\u003c\/strong\u003e 40 Hz\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCrossover frequency:\u003c\/strong\u003e 2.5 kHz\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAmplifier configuration:\u003c\/strong\u003e bi-amplified\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eLow-frequency amplifier:\u003c\/strong\u003e Class D, 80 W\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHigh-frequency amplifier:\u003c\/strong\u003e Class A\/B, 20 W\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTotal power:\u003c\/strong\u003e 100 W\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTotal dynamic power:\u003c\/strong\u003e 210 W\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMaximum SPL:\u003c\/strong\u003e 111 dB\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCoverage angles:\u003c\/strong\u003e 130° horizontal × 85° vertical\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHigh-frequency adjustment:\u003c\/strong\u003e -2 \/ -1 \/ 0 \/ +1 dB\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eLow-frequency adjustment:\u003c\/strong\u003e -2 \/ -1 \/ 0 \/ +2 dB\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAnalogue inputs:\u003c\/strong\u003e balanced XLR \/ 1\/4-inch TRS combination input, unbalanced RCA input\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWireless connectivity:\u003c\/strong\u003e Bluetooth Classic 5.3 TWS A2DP\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSignal-to-noise ratio:\u003c\/strong\u003e \u0026gt;94 dB\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAC input voltage:\u003c\/strong\u003e 100–240 V AC (±10%), 50\/60 Hz\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFuse:\u003c\/strong\u003e T6.3AL\/250 V, not user-serviceable\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eEnclosure construction:\u003c\/strong\u003e PVC vinyl-wrapped MDF\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eBaffle construction:\u003c\/strong\u003e MDF with a reinforced high-impact polystyrene faceplate\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e 388 × 275 × 304 mm (H × W × D)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 9.3 kg\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePackaged dimensions:\u003c\/strong\u003e 502 × 400 × 343 mm (H × W × D)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePackaged weight:\u003c\/strong\u003e 11.3 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat’s Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eKRK KREATE 8 active studio monitor\u003c\/li\u003e\n\u003cli\u003eAC power cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eOne monitor is included. A stereo monitoring system requires two separately purchased KRK KREATE 8 monitors.\u003c\/p\u003e\n\u003ch3\u003eWho Is It For\u003c\/h3\u003e\n\u003cp\u003eThe KRK KREATE 8 is designed for musicians, audio engineers, producers, and content creators who need an active studio monitor for music production, recording, mixing, and other audio work. Two KREATE 8 monitors can be used as a conventional wired stereo pair or linked as a wireless stereo system via Bluetooth TWS.\u003c\/p\u003e\n\u003ch3\u003eCan’t find the KRK product you are looking for?\u003c\/h3\u003e\n\u003cp\u003eContact us: info@stageiq.lt or +370 636 55536.\u003c\/p\u003e","brand":"KRK","offers":[{"title":"Default Title","offer_id":56821936816514,"sku":"L0840007","price":195.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9736\/9730\/files\/imgi_371_K8BT_FrontAngled.jpg?v=1785835018"},{"product_id":"krk-rokit-5-gen-5","title":"KRK ROKIT 5 Generation Five Active Studio Monitor","description":"\u003ch2\u003eKRK ROKIT 5 Generation Five Active Studio Monitor\u003c\/h2\u003e\n\u003cp\u003eThe KRK ROKIT 5 Generation Five active studio monitor is designed for music production, recording, mixing, mastering, and critical listening in nearfield monitoring environments.\u003c\/p\u003e\n\u003cp\u003eIntegrated digital signal processing provides three distinct voicing modes. Mix mode delivers a flat frequency and phase response for mixing, mastering, and critical listening. Create mode is intended for writing, producing, and casual listening, while the midrange-focused Focus mode helps analyse the frequency range where vocals and many instruments contain most of their energy.\u003c\/p\u003e\n\u003cp\u003eThe monitor offers 25 boundary and tuning EQ combinations to help adapt its response to the room and monitor placement. Settings are controlled using the rear-panel display and rotary control. The free KRK Audio Tools app provides a real-time room analyser and EQ recommendation tool to assist with monitor setup.\u003c\/p\u003e\n\u003cp\u003eThe two-way bass reflex system features a 5-inch low-frequency driver with a woven Kevlar® aramid-fibre cone and a 1-inch silk-dome high-frequency driver. A front-firing bass reflex port and low-diffraction baffle design support low-frequency performance, reduced distortion, and improved stereo imaging.\u003c\/p\u003e\n\u003cp\u003eSeparate Class D amplifiers provide 35 W for the low-frequency driver and 20 W for the high-frequency driver. Total rated power is 55 W, total dynamic power reaches 130 W, and the maximum SPL is 104 dB. A balanced XLR \/ 1\/4-inch TRS combination input accommodates audio interfaces, mixing consoles, and monitor controllers.\u003c\/p\u003e\n\u003ch3\u003eMain Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMix, Focus, and Create voicing modes adapt the monitor to different stages of music production and sound evaluation\u003c\/li\u003e\n\u003cli\u003eMix mode provides a flat frequency and phase response for mixing, mastering, and critical listening\u003c\/li\u003e\n\u003cli\u003eFocus mode emphasises the midrange to assist with the analysis of vocals and instruments\u003c\/li\u003e\n\u003cli\u003eCreate mode is designed for writing, producing, and casual listening\u003c\/li\u003e\n\u003cli\u003e25 boundary and tuning EQ combinations help adapt the response to room acoustics and monitor placement\u003c\/li\u003e\n\u003cli\u003e5-inch low-frequency driver with a woven Kevlar® aramid-fibre cone provides controlled diaphragm performance\u003c\/li\u003e\n\u003cli\u003e1-inch silk-dome high-frequency driver extends the frequency range up to 40 kHz\u003c\/li\u003e\n\u003cli\u003eSeparate Class D amplifiers efficiently drive the low- and high-frequency transducers\u003c\/li\u003e\n\u003cli\u003eFront-firing bass reflex port provides greater flexibility when positioning the monitor in the room\u003c\/li\u003e\n\u003cli\u003eLow-diffraction baffle design helps reduce distortion and improve stereo imaging\u003c\/li\u003e\n\u003cli\u003eAcoustic foam isolation wedge helps reduce vibration transfer and allows the monitor angle to be adjusted\u003c\/li\u003e\n\u003cli\u003eTwo interchangeable magnetic faceplates allow the monitor to be used with or without protective grilles\u003c\/li\u003e\n\u003cli\u003eIntegrated mounting points accommodate separately available KRK mounting brackets\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eProduct type:\u003c\/strong\u003e active studio monitor\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSystem:\u003c\/strong\u003e two-way bass reflex\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eVoicing modes:\u003c\/strong\u003e Mix, Focus, Create\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eBoundary and tuning EQ combinations:\u003c\/strong\u003e 25\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eLow-frequency driver:\u003c\/strong\u003e 5-inch woven Kevlar® aramid-fibre cone, ferrite magnet\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHigh-frequency driver:\u003c\/strong\u003e 1-inch silk dome, copper cap, ferrite magnet\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFrequency response (±3 dB):\u003c\/strong\u003e 54 Hz–30 kHz\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eExtended frequency range (+3\/-10 dB):\u003c\/strong\u003e 43 Hz–40 kHz\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCrossover frequency:\u003c\/strong\u003e 2.27 kHz\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAmplifier configuration:\u003c\/strong\u003e bi-amplified, Class D\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eLow-frequency amplifier power:\u003c\/strong\u003e 35 W\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHigh-frequency amplifier power:\u003c\/strong\u003e 20 W\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTotal rated power:\u003c\/strong\u003e 55 W\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTotal dynamic power:\u003c\/strong\u003e 130 W\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMaximum SPL:\u003c\/strong\u003e 104 dB\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCoverage angles:\u003c\/strong\u003e 155° horizontal × 126° vertical\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAnalogue input:\u003c\/strong\u003e balanced XLR \/ 1\/4-inch TRS combination input\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eInput impedance:\u003c\/strong\u003e 5.12 kΩ balanced\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSignal-to-noise ratio:\u003c\/strong\u003e \u0026gt;101.5 dB with low-sensitivity balanced input setting; \u0026gt;94 dB with high-sensitivity unbalanced input setting\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAC input voltage:\u003c\/strong\u003e 100–240 V AC (±10%), 50\/60 Hz\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFuse:\u003c\/strong\u003e 5 × 20 mm T1A\/250 V\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eEnclosure construction:\u003c\/strong\u003e PVC vinyl-wrapped MDF\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eBaffle construction:\u003c\/strong\u003e structurally reinforced high-impact polystyrene\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMounting points:\u003c\/strong\u003e 4 × M6\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e 288 × 191 × 242 mm (H × W × D)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 4.95 kg\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePackaged dimensions:\u003c\/strong\u003e 400 × 260 × 320 mm (H × W × D)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePackaged weight:\u003c\/strong\u003e 6.5 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat’s Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eKRK ROKIT 5 Generation Five active studio monitor\u003c\/li\u003e\n\u003cli\u003eMagnetic faceplate with protective grilles\u003c\/li\u003e\n\u003cli\u003eMagnetic faceplate without grilles\u003c\/li\u003e\n\u003cli\u003eAcoustic foam isolation wedge\u003c\/li\u003e\n\u003cli\u003eAC power cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eOne monitor is included. A stereo monitoring system requires two separately purchased KRK ROKIT 5 Generation Five monitors.\u003c\/p\u003e\n\u003ch3\u003eWho Is It For\u003c\/h3\u003e\n\u003cp\u003eThe KRK ROKIT 5 Generation Five is designed for musicians, producers, and audio engineers who need a compact nearfield monitor for music production, recording, mixing, mastering, and critical listening. Its three voicing modes allow the same monitor to support different stages of the creative workflow.\u003c\/p\u003e\n\u003ch3\u003eCan’t find the KRK product you are looking for?\u003c\/h3\u003e\n\u003cp\u003eContact us: info@stageiq.lt or +370 636 55536.\u003c\/p\u003e","brand":"KRK","offers":[{"title":"Default Title","offer_id":56822037447042,"sku":"L0840008","price":159.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9736\/9730\/files\/imgi_61_3-KRK-Rokit-5-G5_side.jpg?v=1785836224"},{"product_id":"krk-rokit-7-gen-5","title":"KRK ROKIT 7 Generation Five Active Studio Monitor","description":"\u003ch2\u003eKRK ROKIT 7 Generation Five Active Studio Monitor\u003c\/h2\u003e\n\u003cp\u003eThe KRK ROKIT 7 Generation Five active studio monitor is designed for music production, recording, mixing, mastering, and critical listening in studio environments.\u003c\/p\u003e\n\u003cp\u003eIntegrated digital signal processing provides three distinct voicing modes. Mix mode delivers a flat frequency and phase response for mixing, mastering, and critical listening. Create mode is intended for writing, producing, and casual listening, while the midrange-focused Focus mode helps analyse the frequency range where vocals and many instruments contain most of their energy.\u003c\/p\u003e\n\u003cp\u003eThe monitor offers 25 boundary and tuning EQ combinations to help adapt its response to the room and monitor placement. Settings are controlled using the rear-panel display and rotary control. The free KRK Audio Tools app provides a real-time room analyser and EQ recommendation tool to assist with monitor setup.\u003c\/p\u003e\n\u003cp\u003eThe two-way bass reflex system features a 7-inch low-frequency driver with a woven Kevlar® aramid-fibre cone and a 1-inch silk-dome high-frequency driver. A front-firing bass reflex port and low-diffraction baffle design support low-frequency performance, reduced distortion, and improved stereo imaging.\u003c\/p\u003e\n\u003cp\u003eSeparate Class D amplifiers provide 97 W for the low-frequency driver and 48 W for the high-frequency driver. Total rated power is 145 W, total dynamic power reaches 234 W, and the maximum SPL is 110 dB. A balanced XLR \/ 1\/4-inch TRS combination input accommodates audio interfaces, mixing consoles, and monitor controllers.\u003c\/p\u003e\n\u003ch3\u003eMain Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMix, Focus, and Create voicing modes adapt the monitor to different stages of music production and sound evaluation\u003c\/li\u003e\n\u003cli\u003eMix mode provides a flat frequency and phase response for mixing, mastering, and critical listening\u003c\/li\u003e\n\u003cli\u003eFocus mode emphasises the midrange to assist with the analysis of vocals and instruments\u003c\/li\u003e\n\u003cli\u003eCreate mode is designed for writing, producing, and casual listening\u003c\/li\u003e\n\u003cli\u003e25 boundary and tuning EQ combinations help adapt the response to room acoustics and monitor placement\u003c\/li\u003e\n\u003cli\u003e7-inch low-frequency driver with a woven Kevlar® aramid-fibre cone provides controlled diaphragm performance\u003c\/li\u003e\n\u003cli\u003e1-inch silk-dome high-frequency driver extends the frequency range up to 40 kHz\u003c\/li\u003e\n\u003cli\u003eSeparate Class D amplifiers efficiently drive the low- and high-frequency transducers\u003c\/li\u003e\n\u003cli\u003eFront-firing bass reflex port provides greater flexibility when positioning the monitor in the room\u003c\/li\u003e\n\u003cli\u003eLow-diffraction baffle design helps reduce distortion and improve stereo imaging\u003c\/li\u003e\n\u003cli\u003eAcoustic foam isolation wedge helps reduce vibration transfer and allows the monitor angle to be adjusted\u003c\/li\u003e\n\u003cli\u003eTwo interchangeable magnetic faceplates allow the monitor to be used with or without protective grilles\u003c\/li\u003e\n\u003cli\u003eIntegrated mounting points accommodate separately available KRK mounting brackets\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eProduct type:\u003c\/strong\u003e active studio monitor\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSystem:\u003c\/strong\u003e two-way bass reflex\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eVoicing modes:\u003c\/strong\u003e Mix, Focus, Create\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eBoundary and tuning EQ combinations:\u003c\/strong\u003e 25\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eLow-frequency driver:\u003c\/strong\u003e 7-inch woven Kevlar® aramid-fibre cone, ferrite magnet\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHigh-frequency driver:\u003c\/strong\u003e 1-inch silk dome, copper cap, ferrite magnet\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFrequency response (±3 dB):\u003c\/strong\u003e 45 Hz–36 kHz\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eExtended frequency range (+3\/-10 dB):\u003c\/strong\u003e 36 Hz–40 kHz\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCrossover frequency:\u003c\/strong\u003e 1.64 kHz\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAmplifier configuration:\u003c\/strong\u003e bi-amplified, Class D\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eLow-frequency amplifier power:\u003c\/strong\u003e 97 W\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHigh-frequency amplifier power:\u003c\/strong\u003e 48 W\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTotal rated power:\u003c\/strong\u003e 145 W\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTotal dynamic power:\u003c\/strong\u003e 234 W\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMaximum SPL:\u003c\/strong\u003e 110 dB\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCoverage angles:\u003c\/strong\u003e 155° horizontal × 133° vertical\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAnalogue input:\u003c\/strong\u003e balanced XLR \/ 1\/4-inch TRS combination input\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eInput impedance:\u003c\/strong\u003e 5.12 kΩ balanced\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSignal-to-noise ratio:\u003c\/strong\u003e \u0026gt;91.5 dB with low-sensitivity balanced input setting; \u0026gt;89 dB with high-sensitivity unbalanced input setting\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAC input voltage:\u003c\/strong\u003e 100–240 V AC (±10%), 50\/60 Hz\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFuse:\u003c\/strong\u003e 5 × 20 mm T1.6A\/250 V\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eEnclosure construction:\u003c\/strong\u003e PVC vinyl-wrapped MDF\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eBaffle construction:\u003c\/strong\u003e structurally reinforced high-impact polystyrene\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMounting points:\u003c\/strong\u003e 4 × M6\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e 339 × 225 × 290 mm (H × W × D)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 7.65 kg\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePackaged dimensions:\u003c\/strong\u003e 460 × 310 × 370 mm (H × W × D)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePackaged weight:\u003c\/strong\u003e 9.6 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat’s Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eKRK ROKIT 7 Generation Five active studio monitor\u003c\/li\u003e\n\u003cli\u003eMagnetic faceplate with protective grilles\u003c\/li\u003e\n\u003cli\u003eMagnetic faceplate without grilles\u003c\/li\u003e\n\u003cli\u003eAcoustic foam isolation wedge\u003c\/li\u003e\n\u003cli\u003eAC power cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eOne monitor is included. A stereo monitoring system requires two separately purchased KRK ROKIT 7 Generation Five monitors.\u003c\/p\u003e\n\u003ch3\u003eWho Is It For\u003c\/h3\u003e\n\u003cp\u003eThe KRK ROKIT 7 Generation Five is designed for musicians, producers, and audio engineers who need a studio monitor for music production, recording, mixing, mastering, and critical listening. Its three voicing modes allow the same monitor to support different stages of the creative workflow, while the integrated mounting points accommodate immersive audio installations when used with separately available brackets.\u003c\/p\u003e\n\u003ch3\u003eCan’t find the KRK product you are looking for?\u003c\/h3\u003e\n\u003cp\u003eContact us: info@stageiq.lt or +370 636 55536.\u003c\/p\u003e","brand":"KRK","offers":[{"title":"Default Title","offer_id":56822103114114,"sku":"L0840009","price":217.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9736\/9730\/files\/imgi_66_3-KRK-Rokit-7-G5-side.jpg?v=1785837825"},{"product_id":"krk-rokit-8-gen5","title":"KRK ROKIT 8 G5 Active Studio Monitor","description":"\u003ch2\u003eKRK ROKIT 8 G5 Active Studio Monitor\u003c\/h2\u003e\n\u003cp\u003eThe KRK ROKIT 8 G5 is a fifth-generation active studio monitor designed for music production, recording, mixing, mastering, and critical listening in the studio.\u003c\/p\u003e\n\u003cp\u003eThe monitor features three voicing modes. Mix mode provides a flat frequency and phase response, Create mode is suited to music production and casual listening, while Focus mode emphasises the midrange for detailed analysis of vocals and instruments.\u003c\/p\u003e\n\u003cp\u003eThe integrated digital signal processor provides 25 EQ combinations for adapting the monitor to its position and the acoustics of the room. The free KRK Audio Tools app helps analyse room acoustics and select suitable EQ settings.\u003c\/p\u003e\n\u003cp\u003eAn 8-inch woofer with a woven Kevlar® aramid fibre cone and a 1-inch silk-dome tweeter provide an extended frequency range from 32 Hz to 40 kHz. The front-firing bass reflex port and low-diffraction baffle help deliver controlled low-frequency reproduction and precise stereo imaging.\u003c\/p\u003e\n\u003cp\u003eSeparate Class D amplifiers for the low- and high-frequency drivers provide 203 W of total rated power and up to 312 W of dynamic power. A balanced XLR and 1\/4-inch TRS combo input allows the monitor to be connected to an audio interface, mixing console, or other professional audio equipment.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFifth-generation active two-way studio monitor\u003c\/li\u003e\n\u003cli\u003e8-inch woofer with a woven Kevlar® aramid fibre cone\u003c\/li\u003e\n\u003cli\u003e1-inch silk-dome tweeter\u003c\/li\u003e\n\u003cli\u003eMix, Focus, and Create voicing modes\u003c\/li\u003e\n\u003cli\u003eIntegrated digital signal processor\u003c\/li\u003e\n\u003cli\u003e25 EQ combinations\u003c\/li\u003e\n\u003cli\u003e203 W total rated power\u003c\/li\u003e\n\u003cli\u003eUp to 312 W total dynamic power\u003c\/li\u003e\n\u003cli\u003eExtended frequency range from 32 Hz to 40 kHz\u003c\/li\u003e\n\u003cli\u003eFront-firing bass reflex port\u003c\/li\u003e\n\u003cli\u003eBalanced XLR and 1\/4-inch TRS combo input\u003c\/li\u003e\n\u003cli\u003eTwo interchangeable magnetic faceplates\u003c\/li\u003e\n\u003cli\u003eMounting points for optional KRK brackets\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eSystem type:\u003c\/strong\u003e active studio monitor\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eConfiguration:\u003c\/strong\u003e two-way bass reflex system\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eLow-frequency driver:\u003c\/strong\u003e 8-inch woven Kevlar® aramid fibre cone, ferrite magnet\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHigh-frequency driver:\u003c\/strong\u003e 1-inch silk dome, copper cap, ferrite magnet\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFrequency response:\u003c\/strong\u003e 42 Hz–36 kHz (±3 dB)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eExtended frequency range:\u003c\/strong\u003e 32 Hz–40 kHz (+3\/–10 dB)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCrossover frequency:\u003c\/strong\u003e 1.64 kHz\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAmplifier type:\u003c\/strong\u003e bi-amplified Class D\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eLow-frequency amplifier rated power:\u003c\/strong\u003e 135 W\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHigh-frequency amplifier rated power:\u003c\/strong\u003e 68 W\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTotal rated power:\u003c\/strong\u003e 203 W\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTotal dynamic power:\u003c\/strong\u003e 312 W\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMaximum SPL:\u003c\/strong\u003e 111 dB\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCoverage:\u003c\/strong\u003e 148° horizontal × 125° vertical\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAnalogue input:\u003c\/strong\u003e balanced XLR \/ 1\/4-inch TRS combo connector\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eInput impedance:\u003c\/strong\u003e 5.12 kΩ balanced\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSignal-to-noise ratio:\u003c\/strong\u003e greater than 94 dB at low sensitivity with a balanced signal\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePower supply:\u003c\/strong\u003e 100–240 V AC, 50\/60 Hz\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eEnclosure material:\u003c\/strong\u003e PVC vinyl-wrapped MDF\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eBaffle material:\u003c\/strong\u003e structurally reinforced high-impact polystyrene\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMounting points:\u003c\/strong\u003e 4 × M6\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e 400 × 266 × 319 mm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 10.45 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePackage Contents\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eKRK ROKIT 8 G5 active studio monitor\u003c\/li\u003e\n\u003cli\u003eMagnetic faceplate with protective grilles\u003c\/li\u003e\n\u003cli\u003eMagnetic faceplate without grilles\u003c\/li\u003e\n\u003cli\u003eAcoustic foam wedge isolation pad\u003c\/li\u003e\n\u003cli\u003ePower cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe package contains one studio monitor. Two separately purchased monitors are required for a stereo setup.\u003c\/p\u003e\n\u003ch3\u003eWho Is It For?\u003c\/h3\u003e\n\u003cp\u003eThe KRK ROKIT 8 G5 is suitable for home and professional recording studios, music creators, producers, audio engineers, and performers. Its 8-inch woofer and extended frequency range make it suitable for music production, recording, mixing, mastering, and critical evaluation of audio material.\u003c\/p\u003e\n\u003ch3\u003eCannot Find the KRK Product You Need?\u003c\/h3\u003e\n\u003cp\u003eContact us at info@stageiq.lt or +370 636 55536.\u003c\/p\u003e","brand":"KRK","offers":[{"title":"Default Title","offer_id":56822137028994,"sku":"L0840010","price":264.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9736\/9730\/files\/imgi_65_3-KRK-ROKIT-8-G5RP5G8-side.jpg?v=1785839127"},{"product_id":"krk-v4s4","title":"KRK V4S4 Active Studio Monitor","description":"\u003ch2\u003eKRK V4S4 Active Studio Monitor\u003c\/h2\u003e\n\u003cp\u003eThe KRK V4S4 is an active nearfield studio monitor designed for recording, music production, mixing, and mastering.\u003c\/p\u003e\n\u003cp\u003eIts two-way design combines a 4-inch woofer with a woven Kevlar® cone and a 1-inch tweeter with a Kevlar® dome. Using Kevlar® for both drivers helps provide consistent midrange reproduction, controlled low frequencies, and detailed high-frequency response.\u003c\/p\u003e\n\u003cp\u003eThe integrated digital signal processor provides 49 selectable EQ combinations. Low-, mid-, and high-frequency adjustments allow the monitor’s response to be adapted to room acoustics, desktop placement, and individual monitoring requirements.\u003c\/p\u003e\n\u003cp\u003eDedicated Class D amplifiers for the low- and high-frequency drivers deliver 85 W of total power and a maximum SPL of 110 dB. The front-firing bass reflex port allows more flexible placement, while the aluminium front baffle and EVA foam base help stabilise the enclosure and reduce vibration transfer to the supporting surface.\u003c\/p\u003e\n\u003cp\u003eA Neutrik XLR and 1\/4-inch TRS combo input accepts balanced analogue audio signals. The rear panel also provides controls for input-level attenuation, input sensitivity, ground lift, standby mode, and the front logo LED.\u003c\/p\u003e\n\u003ch3\u003eMain Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e4-inch woofer with a woven Kevlar® cone provides controlled low- and mid-frequency reproduction\u003c\/li\u003e\n\u003cli\u003e1-inch tweeter with a Kevlar® dome delivers detailed high-frequency reproduction\u003c\/li\u003e\n\u003cli\u003e49 DSP-controlled EQ combinations allow adjustment for room acoustics and monitor placement\u003c\/li\u003e\n\u003cli\u003eLow-, mid-, and high-frequency controls provide detailed adjustment of the monitor response\u003c\/li\u003e\n\u003cli\u003eDedicated Class D amplifiers for both drivers deliver 85 W of total power\u003c\/li\u003e\n\u003cli\u003eFront-firing bass reflex port provides greater flexibility when placing the monitor near walls or on a desktop\u003c\/li\u003e\n\u003cli\u003eSolid aluminium front baffle helps maintain enclosure rigidity and stable stereo imaging\u003c\/li\u003e\n\u003cli\u003eEVA foam base reduces slipping and limits vibration transfer to the supporting surface\u003c\/li\u003e\n\u003cli\u003eNeutrik XLR and 1\/4-inch TRS combo input accepts balanced analogue audio signals\u003c\/li\u003e\n\u003cli\u003eGround-lift function helps address hum caused by ground loops\u003c\/li\u003e\n\u003cli\u003eIncluded protective grille can be installed when the drivers require additional protection in mobile applications\u003c\/li\u003e\n\u003cli\u003eUniversal threaded mounting points allow the monitor to be used with compatible brackets\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eProduct type:\u003c\/strong\u003e active studio monitor\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eConfiguration:\u003c\/strong\u003e two-way\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eLow-frequency driver:\u003c\/strong\u003e 4-inch woofer, cast-aluminium frame, Kevlar® cone, ferrite magnet\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHigh-frequency driver:\u003c\/strong\u003e 1-inch Kevlar® dome tweeter, ferrite magnet\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFrequency response:\u003c\/strong\u003e 58 Hz–19 kHz (±3 dB)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFrequency range:\u003c\/strong\u003e 50 Hz–24 kHz (–10 dB)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCrossover frequency:\u003c\/strong\u003e 2.1 kHz\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eLow-frequency amplifier power:\u003c\/strong\u003e 55 W\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHigh-frequency amplifier power:\u003c\/strong\u003e 30 W\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTotal power:\u003c\/strong\u003e 85 W\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMaximum SPL:\u003c\/strong\u003e 110 dB\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eEQ settings:\u003c\/strong\u003e 49 DSP-controlled combinations\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAnalogue input:\u003c\/strong\u003e Neutrik XLR \/ 1\/4-inch TRS combo connector for balanced signals\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eInput impedance:\u003c\/strong\u003e 10 kΩ\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePower connector:\u003c\/strong\u003e standard IEC connector\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eEnclosure construction:\u003c\/strong\u003e MDF and aluminium\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e 256 × 166 × 218 mm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 5.8 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat’s Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eKRK V4S4 active studio monitor\u003c\/li\u003e\n\u003cli\u003ePower cable\u003c\/li\u003e\n\u003cli\u003eProtective grille with mounting screws and installation instructions\u003c\/li\u003e\n\u003cli\u003eCustom KRK key for adjusting the EQ settings\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe package contains one studio monitor. Two separately purchased monitors are required for a stereo setup.\u003c\/p\u003e\n\u003ch3\u003eWho Is It For\u003c\/h3\u003e\n\u003cp\u003eThe KRK V4S4 is designed for home and professional recording studios, broadcast facilities, sound-design environments, and music-production workstations. Its compact enclosure is suitable for nearfield monitoring and workspaces where accurate sound evaluation, flexible acoustic adjustment, and compact dimensions are important.\u003c\/p\u003e\n\u003ch3\u003eCan’t find the KRK product you are looking for?\u003c\/h3\u003e\n\u003cp\u003eContact us: info@stageiq.lt or +370 636 55536.\u003c\/p\u003e","brand":"KRK","offers":[{"title":"Default Title","offer_id":56822158721410,"sku":"L0840011","price":287.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9736\/9730\/files\/imgi_50_2-KRK-V4-Series-4-Side.jpg?v=1785839839"},{"product_id":"krk-v8s4","title":"KRK V8S4 Active Studio Monitor","description":"\u003ch2\u003eKRK V8S4 Active Studio Monitor\u003c\/h2\u003e\n\u003cp\u003eThe KRK V8S4 is an active studio monitor designed for music production, recording, mixing, mastering, and critical listening.\u003c\/p\u003e\n\u003cp\u003eIts two-way design combines an 8-inch woofer with a woven Kevlar® cone and a 1-inch tweeter with a Kevlar® dome. Using Kevlar® for both drivers helps provide consistent midrange reproduction, controlled low frequencies, and detailed high-frequency response.\u003c\/p\u003e\n\u003cp\u003eThe integrated digital signal processor provides 49 selectable EQ combinations. Low-, mid-, and high-frequency adjustments allow the monitor’s response to be adapted to room acoustics, desktop or wall placement, and individual monitoring requirements.\u003c\/p\u003e\n\u003cp\u003eDedicated Class D amplifiers for the low- and high-frequency drivers deliver 230 W of total power and a maximum SPL of 118 dB. The front-firing bass reflex port provides greater placement flexibility, while the aluminium front baffle and EVA foam base help stabilise the enclosure and reduce vibration transfer to the supporting surface.\u003c\/p\u003e\n\u003cp\u003eA Neutrik XLR and 1\/4-inch TRS combo input accepts balanced analogue audio signals. The rear panel also provides controls for input-level attenuation, input sensitivity, ground lift, standby mode, and the front logo LED.\u003c\/p\u003e\n\u003ch3\u003eMain Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e8-inch woofer with a woven Kevlar® cone provides controlled low- and mid-frequency reproduction\u003c\/li\u003e\n\u003cli\u003e1-inch tweeter with a Kevlar® dome delivers detailed high-frequency reproduction\u003c\/li\u003e\n\u003cli\u003eExtended 29 Hz–24 kHz frequency range supports evaluation across a wide audio spectrum\u003c\/li\u003e\n\u003cli\u003e49 DSP-controlled EQ combinations allow adjustment for room acoustics and monitor placement\u003c\/li\u003e\n\u003cli\u003eLow-, mid-, and high-frequency controls provide detailed adjustment of the monitor response\u003c\/li\u003e\n\u003cli\u003eDedicated Class D amplifiers for both drivers deliver 230 W of total power\u003c\/li\u003e\n\u003cli\u003eMaximum SPL of 118 dB supports monitoring at higher listening levels\u003c\/li\u003e\n\u003cli\u003eFront-firing bass reflex port provides greater flexibility when positioning the monitor near walls or on a desktop\u003c\/li\u003e\n\u003cli\u003eSolid aluminium front baffle helps maintain enclosure rigidity and stable stereo imaging\u003c\/li\u003e\n\u003cli\u003eEVA foam base reduces slipping and limits vibration transfer to the supporting surface\u003c\/li\u003e\n\u003cli\u003eNeutrik XLR and 1\/4-inch TRS combo input accepts balanced analogue audio signals\u003c\/li\u003e\n\u003cli\u003eIncluded protective grille can be installed when the drivers require additional protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eProduct type:\u003c\/strong\u003e active studio monitor\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eConfiguration:\u003c\/strong\u003e two-way\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eLow-frequency driver:\u003c\/strong\u003e 8-inch woofer, cast-aluminium frame, Kevlar® cone, ferrite magnet\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHigh-frequency driver:\u003c\/strong\u003e 1-inch Kevlar® dome tweeter, ferrite magnet\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFrequency response:\u003c\/strong\u003e 35 Hz–19 kHz (±3 dB)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFrequency range:\u003c\/strong\u003e 29 Hz–24 kHz (–10 dB)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCrossover frequency:\u003c\/strong\u003e 1.8 kHz\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eLow-frequency amplifier power:\u003c\/strong\u003e 200 W\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHigh-frequency amplifier power:\u003c\/strong\u003e 30 W\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTotal power:\u003c\/strong\u003e 230 W\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMaximum SPL:\u003c\/strong\u003e 118 dB\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eEQ settings:\u003c\/strong\u003e 49 DSP-controlled combinations\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAnalogue input:\u003c\/strong\u003e Neutrik XLR \/ 1\/4-inch TRS combo connector for balanced signals\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eInput impedance:\u003c\/strong\u003e 10 kΩ\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePower connector:\u003c\/strong\u003e standard IEC connector\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eEnclosure construction:\u003c\/strong\u003e MDF and aluminium\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e 435 × 284 × 347 mm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 14.4 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat’s Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eKRK V8S4 active studio monitor\u003c\/li\u003e\n\u003cli\u003ePower cable\u003c\/li\u003e\n\u003cli\u003eProtective grille with mounting screws and installation instructions\u003c\/li\u003e\n\u003cli\u003eCustom KRK key for adjusting the EQ settings\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe package contains one studio monitor. Two separately purchased monitors are required for a stereo setup.\u003c\/p\u003e\n\u003ch3\u003eWho Is It For\u003c\/h3\u003e\n\u003cp\u003eThe KRK V8S4 is designed for home and professional recording studios, broadcast facilities, sound-design environments, and music-production workstations. Its 8-inch woofer, 230 W total power, and extended low-frequency range suit applications where detailed evaluation of low-frequency content and monitoring at higher sound levels are required.\u003c\/p\u003e\n\u003ch3\u003eCan’t find the KRK product you are looking for?\u003c\/h3\u003e\n\u003cp\u003eContact us: info@stageiq.lt or +370 636 55536.\u003c\/p\u003e","brand":"KRK","offers":[{"title":"Default Title","offer_id":56822178611586,"sku":"L0840013","price":581.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9736\/9730\/files\/imgi_50_2-KRK-V8-Series-4-side.jpg?v=1785840373"},{"product_id":"krk-kreate-5-latte","title":"KRK KREATE 5 Latte Active Studio Monitor","description":"\u003ch2\u003eKRK KREATE 5 Latte Active Studio Monitor\u003c\/h2\u003e\n\u003cp\u003eThe KRK KREATE 5 Latte is an active studio monitor with an exclusive Latte finish, designed for music production, recording, mixing, content creation, and everyday listening.\u003c\/p\u003e\n\u003cp\u003eIts two-way design combines a 5-inch woofer with a woven glass-fibre composite cone and a 1-inch textile-dome tweeter. The woofer construction provides effective damping and helps control cone resonances, while the tweeter’s neodymium magnet supports high-frequency reproduction extending up to 40 kHz.\u003c\/p\u003e\n\u003cp\u003eIndependent low- and high-frequency controls allow the monitor’s response to be adjusted for room acoustics, placement, and individual listening requirements. The woofer is powered by a Class D amplifier, while the tweeter uses a Class A\/B amplifier. The system delivers 60 W of total power and 128 W of total dynamic power.\u003c\/p\u003e\n\u003cp\u003eBluetooth® Classic 5.3 with TWS and A2DP support allows audio to be streamed wirelessly. When two compatible KREATE 5 monitors are used, the TWS function can create a wireless stereo system.\u003c\/p\u003e\n\u003cp\u003eA balanced XLR and 1\/4-inch TRS combo input is provided for studio equipment, while an unbalanced RCA input supports additional consumer and professional audio sources. The universal 100–240 V power supply allows the monitor to operate with different mains voltages.\u003c\/p\u003e\n\u003ch3\u003eMain Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eExclusive Latte finish suits bright, contemporary studios and creative workspaces\u003c\/li\u003e\n\u003cli\u003e5-inch woofer with a woven glass-fibre composite cone provides controlled low- and mid-frequency reproduction\u003c\/li\u003e\n\u003cli\u003e1-inch textile-dome tweeter extends high-frequency reproduction up to 40 kHz\u003c\/li\u003e\n\u003cli\u003eIndependent low- and high-frequency controls allow adjustment for room acoustics and monitor placement\u003c\/li\u003e\n\u003cli\u003eClass D low-frequency and Class A\/B high-frequency amplifiers deliver 60 W of total power\u003c\/li\u003e\n\u003cli\u003e128 W of dynamic power supports the reproduction of short signal peaks\u003c\/li\u003e\n\u003cli\u003eBluetooth® Classic 5.3 enables wireless audio streaming from compatible devices\u003c\/li\u003e\n\u003cli\u003eTWS technology allows two compatible monitors to be linked for wireless stereo playback\u003c\/li\u003e\n\u003cli\u003eBalanced XLR and 1\/4-inch TRS combo input supports professional studio equipment\u003c\/li\u003e\n\u003cli\u003eUnbalanced RCA input provides an additional connection for analogue audio sources\u003c\/li\u003e\n\u003cli\u003eBass reflex system extends low-frequency reproduction\u003c\/li\u003e\n\u003cli\u003eUniversal power supply supports operation with 100–240 V mains power\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eProduct type:\u003c\/strong\u003e active studio monitor\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eColour:\u003c\/strong\u003e Latte\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eConfiguration:\u003c\/strong\u003e two-way bass reflex\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eLow-frequency driver:\u003c\/strong\u003e 5-inch woofer, woven glass-fibre composite cone, ferrite magnet\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHigh-frequency driver:\u003c\/strong\u003e 1-inch textile dome, neodymium magnet\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFrequency response:\u003c\/strong\u003e 58 Hz–40 kHz (±3 dB)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eLow-frequency extension:\u003c\/strong\u003e 46 Hz (–10 dB)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCrossover frequency:\u003c\/strong\u003e 2.56 kHz\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAmplifier configuration:\u003c\/strong\u003e Class D for low frequencies, Class A\/B for high frequencies\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eLow-frequency amplifier power:\u003c\/strong\u003e 45 W\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHigh-frequency amplifier power:\u003c\/strong\u003e 15 W\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTotal power:\u003c\/strong\u003e 60 W\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTotal dynamic power:\u003c\/strong\u003e 128 W\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMaximum SPL:\u003c\/strong\u003e 105 dB\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCoverage angles:\u003c\/strong\u003e 135° horizontal × 90° vertical\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAnalogue inputs:\u003c\/strong\u003e balanced XLR \/ 1\/4-inch TRS combo input, unbalanced RCA input\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWireless connectivity:\u003c\/strong\u003e Bluetooth® Classic 5.3, TWS, A2DP\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSignal-to-noise ratio:\u003c\/strong\u003e greater than 94 dB\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePower requirements:\u003c\/strong\u003e 100–240 V AC (±10%), 50\/60 Hz\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFuse:\u003c\/strong\u003e T4AL\/250V, not user-serviceable\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eEnclosure:\u003c\/strong\u003e PVC vinyl-wrapped MDF\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFront baffle:\u003c\/strong\u003e MDF with a reinforced high-impact polystyrene faceplate\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e 259 × 185 × 229 mm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 4.3 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat’s Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eKRK KREATE 5 Latte active studio monitor\u003c\/li\u003e\n\u003cli\u003ePower cable\u003c\/li\u003e\n\u003cli\u003eUser manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe package contains one studio monitor. Two separately purchased monitors are required for a stereo system.\u003c\/p\u003e\n\u003ch3\u003eWho Is It For\u003c\/h3\u003e\n\u003cp\u003eThe KRK KREATE 5 Latte is designed for musicians, audio engineers, producers, and digital content creators. Its compact enclosure and Latte finish suit home studios, music-production workstations, audio editing, video sound production, and everyday listening.\u003c\/p\u003e\n\u003ch3\u003eCan’t find the KRK product you are looking for?\u003c\/h3\u003e\n\u003cp\u003eContact us: info@stageiq.lt or +370 636 55536.\u003c\/p\u003e","brand":"KRK","offers":[{"title":"Default Title","offer_id":56822211903874,"sku":"L0840020","price":140.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9736\/9730\/files\/imgi_54_K5L-NA_FrontAngled.jpg?v=1785842034"},{"product_id":"krk-s12-4","title":"KRK S12.4 Powered Studio Subwoofer","description":"\u003ch2\u003eKRK S12.4 Powered Studio Subwoofer\u003c\/h2\u003e\n\u003cp\u003eThe KRK S12.4 is a powered studio subwoofer designed to extend the frequency range of studio monitors for mixing, mastering, music production, and detailed evaluation of low-frequency content.\u003c\/p\u003e\n\u003cp\u003eIts 12-inch low-frequency driver features a Kevlar® aramid-fibre composite cone and a 2.5-inch voice coil. The design provides controlled low-frequency reproduction, while the extended 23–130 Hz frequency range reveals information that smaller studio monitors cannot reproduce.\u003c\/p\u003e\n\u003cp\u003eThe integrated Class D amplifier delivers 220 W of continuous power and a maximum peak SPL of 119.9 dB. The front-firing bass reflex port extends low-frequency reproduction, reduces interaction with nearby room boundaries, and is shaped to minimise airflow noise.\u003c\/p\u003e\n\u003cp\u003eA four-position crossover control allows the S12.4 to be matched with KRK or third-party studio monitors. The bypass function, operated using an optional footswitch, disables the subwoofer and high-pass filter while sending a full-range signal to the monitors. This allows quick comparisons with and without the subwoofer’s contribution.\u003c\/p\u003e\n\u003cp\u003eLeft and right XLR, 1\/4-inch TRS, and RCA inputs and outputs allow the subwoofer to be integrated into different studio systems. A dedicated balanced 1\/4-inch TRS LFE input is also provided, while volume, input sensitivity, polarity, and ground-lift controls support accurate system setup.\u003c\/p\u003e\n\u003ch3\u003eMain Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e12-inch woofer with a Kevlar® aramid-fibre composite cone provides controlled low-frequency reproduction\u003c\/li\u003e\n\u003cli\u003eLow-frequency extension down to 23 Hz supports evaluation of deep musical and LFE content\u003c\/li\u003e\n\u003cli\u003e220 W Class D amplifier delivers efficient operation and accurate transient reproduction\u003c\/li\u003e\n\u003cli\u003eMaximum peak SPL of 119.9 dB supports demanding studio monitoring environments\u003c\/li\u003e\n\u003cli\u003eFour-position crossover control helps match the subwoofer to existing studio monitors\u003c\/li\u003e\n\u003cli\u003eOptional footswitch control allows quick comparisons with and without the subwoofer\u003c\/li\u003e\n\u003cli\u003eFront-firing bass reflex port reduces interaction with nearby room boundaries and provides greater placement flexibility\u003c\/li\u003e\n\u003cli\u003eXLR, 1\/4-inch TRS, and RCA inputs and outputs support a wide range of studio systems\u003c\/li\u003e\n\u003cli\u003eDedicated balanced LFE input supports connection of a separate low-frequency effects channel\u003c\/li\u003e\n\u003cli\u003ePolarity, input-sensitivity, and ground-lift controls help integrate the subwoofer with the complete monitoring system\u003c\/li\u003e\n\u003cli\u003eReinforced 18 mm MDF enclosure provides structural strength and durability\u003c\/li\u003e\n\u003cli\u003eEVA isolation pad reduces vibration transfer to the floor or supporting surface\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eProduct type:\u003c\/strong\u003e powered studio subwoofer\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eConfiguration:\u003c\/strong\u003e front-loaded, vented enclosure\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eLow-frequency driver:\u003c\/strong\u003e 12-inch Kevlar® aramid-fibre composite woofer\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eVoice coil:\u003c\/strong\u003e 2.5 inches\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFrequency response:\u003c\/strong\u003e 26–97 Hz (±3 dB)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFrequency range:\u003c\/strong\u003e 23–130 Hz (–10 dB)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMaximum peak SPL:\u003c\/strong\u003e 119.9 dB\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAmplifier type:\u003c\/strong\u003e Class D\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eContinuous power:\u003c\/strong\u003e 220 W at 1% THD+N and 44 Hz\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSignal-to-noise ratio:\u003c\/strong\u003e 92 dB\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAmplifier distortion:\u003c\/strong\u003e no more than 0.3% THD+N at –3 dB of maximum power output, 29–97 Hz\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eInput impedance:\u003c\/strong\u003e 9.4 kΩ balanced, 9.2 kΩ unbalanced\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCrossover control:\u003c\/strong\u003e four-position LPF \/ HPF\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePolarity:\u003c\/strong\u003e 0° or 180°\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eInput sensitivity:\u003c\/strong\u003e standard or high\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eGround lift:\u003c\/strong\u003e on or off\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eStandby mode:\u003c\/strong\u003e on or off\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eBypass control:\u003c\/strong\u003e optional footswitch\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eInputs:\u003c\/strong\u003e 2 × XLR, 2 × 1\/4-inch TRS, 2 × RCA\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eLFE input:\u003c\/strong\u003e balanced 1\/4-inch TRS\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOutputs:\u003c\/strong\u003e 2 × XLR, 2 × 1\/4-inch TRS, 2 × RCA\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFootswitch connector:\u003c\/strong\u003e 1\/4-inch\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eIndicators:\u003c\/strong\u003e power and standby\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePower requirements:\u003c\/strong\u003e selectable 110–120 V or 220–240 V AC\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eEnclosure:\u003c\/strong\u003e reinforced 18 mm MDF\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFinish:\u003c\/strong\u003e black vinyl wrap with a black-painted baffle\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eIsolation:\u003c\/strong\u003e EVA pad\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e 416 × 606 × 365 mm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 28.3 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat’s Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eKRK S12.4 powered studio subwoofer\u003c\/li\u003e\n\u003cli\u003ePower cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe bypass footswitch and protective woofer grille are not included and are available separately.\u003c\/p\u003e\n\u003ch3\u003eWho Is It For\u003c\/h3\u003e\n\u003cp\u003eThe KRK S12.4 is designed for music producers, audio engineers, mastering engineers, sound designers, and broadcast studios. It suits monitoring systems where accurate evaluation of deep musical frequencies, electronic bass, cinematic sound effects, and LFE-channel content is required.\u003c\/p\u003e\n\u003ch3\u003eCan’t find the KRK product you are looking for?\u003c\/h3\u003e\n\u003cp\u003eContact us: info@stageiq.lt or +370 636 55536.\u003c\/p\u003e","brand":"KRK","offers":[{"title":"Default Title","offer_id":56822288220546,"sku":"L0840016","price":596.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9736\/9730\/files\/imgi_46_2-KRK-S12-4-Angle.jpg?v=1785842611"},{"product_id":"krk-s10-4","title":"KRK S10.4 Powered Studio Subwoofer","description":"\u003ch2\u003eKRK S10.4 Powered Studio Subwoofer\u003c\/h2\u003e\n\u003cp\u003eThe KRK S10.4 is a powered studio subwoofer designed to extend the frequency range of studio monitors for mixing, mastering, music production, and detailed evaluation of low-frequency content.\u003c\/p\u003e\n\u003cp\u003eIts 10-inch low-frequency driver features a glass-aramid composite cone and a 2-inch voice coil. The design provides controlled bass reproduction, while the extended 27–156 Hz frequency range reveals information that smaller studio monitors cannot reproduce.\u003c\/p\u003e\n\u003cp\u003eThe integrated Class D amplifier delivers 160 W of continuous power and a maximum peak SPL of 117.2 dB. The front-firing bass reflex port extends low-frequency reproduction, reduces interaction with nearby room boundaries, and is shaped to minimise airflow noise.\u003c\/p\u003e\n\u003cp\u003eA four-position crossover control allows the S10.4 to be matched with KRK or third-party studio monitors. The bypass function, operated using an optional footswitch, disables the subwoofer and high-pass filter while sending a full-range signal to the monitors. This allows quick comparisons with and without the subwoofer’s contribution.\u003c\/p\u003e\n\u003cp\u003eLeft and right XLR, 1\/4-inch TRS, and RCA inputs and outputs allow the subwoofer to be integrated into different studio systems. Volume, input-sensitivity, polarity, standby, and ground-lift controls support accurate setup of the complete monitoring system.\u003c\/p\u003e\n\u003ch3\u003eMain Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e10-inch woofer with a glass-aramid composite cone provides controlled low-frequency reproduction\u003c\/li\u003e\n\u003cli\u003eLow-frequency extension down to 27 Hz supports evaluation of deep musical content\u003c\/li\u003e\n\u003cli\u003e160 W Class D amplifier delivers efficient operation and accurate transient reproduction\u003c\/li\u003e\n\u003cli\u003eMaximum peak SPL of 117.2 dB supports demanding studio monitoring environments\u003c\/li\u003e\n\u003cli\u003eFour-position crossover control helps match the subwoofer to existing studio monitors\u003c\/li\u003e\n\u003cli\u003eOptional footswitch control allows quick comparisons with and without the subwoofer\u003c\/li\u003e\n\u003cli\u003eFront-firing bass reflex port reduces interaction with nearby room boundaries and provides greater placement flexibility\u003c\/li\u003e\n\u003cli\u003eXLR, 1\/4-inch TRS, and RCA inputs and outputs support a wide range of studio systems\u003c\/li\u003e\n\u003cli\u003ePolarity control provides 0° and 180° settings for system and placement alignment\u003c\/li\u003e\n\u003cli\u003eStandard and high input-sensitivity settings support audio sources with different signal levels\u003c\/li\u003e\n\u003cli\u003eGround-lift function helps address hum caused by ground loops\u003c\/li\u003e\n\u003cli\u003eEVA isolation pad reduces vibration transfer to the floor or supporting surface\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eProduct type:\u003c\/strong\u003e powered studio subwoofer\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eConfiguration:\u003c\/strong\u003e front-loaded, vented enclosure\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eLow-frequency driver:\u003c\/strong\u003e 10-inch glass-aramid composite woofer\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eVoice coil:\u003c\/strong\u003e 2 inches\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFrequency response:\u003c\/strong\u003e 30–110 Hz (±3 dB)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFrequency range:\u003c\/strong\u003e 27–156 Hz (–10 dB)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMaximum peak SPL:\u003c\/strong\u003e 117.2 dB\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAmplifier type:\u003c\/strong\u003e Class D\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eContinuous power:\u003c\/strong\u003e 160 W at 1% THD+N and 44 Hz\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSignal-to-noise ratio:\u003c\/strong\u003e 92 dB\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAmplifier distortion:\u003c\/strong\u003e no more than 0.12% THD+N at –3 dB of maximum power output, 31–110 Hz\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eInput impedance:\u003c\/strong\u003e 9.4 kΩ balanced, 9.2 kΩ unbalanced\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCrossover control:\u003c\/strong\u003e four-position LPF \/ HPF\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePolarity:\u003c\/strong\u003e 0° or 180°\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eInput sensitivity:\u003c\/strong\u003e standard or high\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eGround lift:\u003c\/strong\u003e on or off\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eStandby mode:\u003c\/strong\u003e on or off\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eBypass control:\u003c\/strong\u003e optional footswitch\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eInputs:\u003c\/strong\u003e 2 × XLR, 2 × 1\/4-inch TRS, 2 × RCA\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOutputs:\u003c\/strong\u003e 2 × XLR, 2 × 1\/4-inch TRS, 2 × RCA\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFootswitch connector:\u003c\/strong\u003e 1\/4-inch\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eLFE input:\u003c\/strong\u003e none\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eIndicators:\u003c\/strong\u003e power and standby\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePower requirements:\u003c\/strong\u003e 100–240 V AC\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eEnclosure:\u003c\/strong\u003e reinforced 15 and 18 mm MDF\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFinish:\u003c\/strong\u003e black vinyl wrap with a black-painted baffle\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eIsolation:\u003c\/strong\u003e EVA pad\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e 341 × 479 × 310 mm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 15.88 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat’s Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eKRK S10.4 powered studio subwoofer\u003c\/li\u003e\n\u003cli\u003ePower cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe bypass footswitch and protective woofer grille are not included and are available separately.\u003c\/p\u003e\n\u003ch3\u003eWho Is It For\u003c\/h3\u003e\n\u003cp\u003eThe KRK S10.4 is designed for music producers, audio engineers, mastering engineers, sound designers, and broadcast studios. It suits monitoring systems where accurate evaluation of electronic music, bass instruments, percussion, and other low-frequency content is required.\u003c\/p\u003e\n\u003ch3\u003eCan’t find the KRK product you are looking for?\u003c\/h3\u003e\n\u003cp\u003eContact us: info@stageiq.lt or +370 636 55536.\u003c\/p\u003e","brand":"KRK","offers":[{"title":"Default Title","offer_id":56822609969538,"sku":"L0840015","price":378.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9736\/9730\/files\/imgi_46_2-KRK-S10-4-Angle.jpg?v=1785852231"},{"product_id":"krk-s8-4","title":"KRK S8.4 Powered Studio Subwoofer","description":"\u003ch2\u003eKRK S8.4 Powered Studio Subwoofer\u003c\/h2\u003e\n\u003cp\u003eThe KRK S8.4 is a compact powered studio subwoofer designed to extend the frequency range of studio monitors for mixing, mastering, music production, sound design, and critical evaluation of low-frequency content.\u003c\/p\u003e\n\u003cp\u003eIts 8-inch glass-aramid composite woofer features a 1.5-inch voice coil and delivers low-frequency extension down to 29 Hz. The front-firing bass port helps reduce boundary coupling and airflow noise.\u003c\/p\u003e\n\u003cp\u003eAn integrated 109 W Class D amplifier delivers a maximum peak sound pressure level of 112.8 dB. A four-position crossover control makes it possible to integrate the subwoofer with KRK studio monitors or models from other manufacturers.\u003c\/p\u003e\n\u003cp\u003eAn optional footswitch can bypass both the subwoofer and its crossover filter, sending a full-range signal to the main monitors. This provides a quick way to compare a mix with and without extended low-frequency reproduction.\u003c\/p\u003e\n\u003cp\u003eXLR, 1\/4-inch TRS, and RCA inputs and outputs allow the KRK S8.4 to connect to a wide range of studio systems. Volume, input sensitivity, polarity, auto-standby, and ground-lift controls help adapt its performance to the room and monitoring setup.\u003c\/p\u003e\n\u003ch3\u003eMain Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e8-inch glass-aramid composite woofer.\u003c\/li\u003e\n\u003cli\u003e1.5-inch woofer voice coil.\u003c\/li\u003e\n\u003cli\u003eLow-frequency extension down to 29 Hz.\u003c\/li\u003e\n\u003cli\u003eIntegrated 109 W Class D amplifier.\u003c\/li\u003e\n\u003cli\u003eMaximum peak SPL of 112.8 dB.\u003c\/li\u003e\n\u003cli\u003eFour-position crossover control.\u003c\/li\u003e\n\u003cli\u003eFront-firing bass port.\u003c\/li\u003e\n\u003cli\u003eCompact, low-profile enclosure.\u003c\/li\u003e\n\u003cli\u003eSelectable polarity and input sensitivity.\u003c\/li\u003e\n\u003cli\u003eAuto-standby and ground-lift functions.\u003c\/li\u003e\n\u003cli\u003eXLR, 1\/4-inch TRS, and RCA inputs and outputs.\u003c\/li\u003e\n\u003cli\u003eSupport for an optional bypass footswitch.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eProduct type:\u003c\/strong\u003e powered studio subwoofer\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eConfiguration:\u003c\/strong\u003e front-loaded, vented subwoofer\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eLow-frequency driver:\u003c\/strong\u003e 8-inch glass-aramid composite woofer\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eVoice coil:\u003c\/strong\u003e 1.5 inches\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFrequency response:\u003c\/strong\u003e 34.5–133 Hz (±3 dB)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFrequency range:\u003c\/strong\u003e 29–205 Hz (–10 dB)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMaximum peak SPL:\u003c\/strong\u003e 112.8 dB\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAmplifier class:\u003c\/strong\u003e Class D\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eContinuous amplifier power:\u003c\/strong\u003e 109 W at 1% THD+N and 46 Hz\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSignal-to-noise ratio:\u003c\/strong\u003e 92 dB\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAmplifier distortion:\u003c\/strong\u003e ≤0.1% THD+N at –3 dB below maximum output, 35–133 Hz\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eInput impedance:\u003c\/strong\u003e 9.4 kΩ balanced and 9.2 kΩ unbalanced\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCrossover control:\u003c\/strong\u003e four-position\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePolarity control:\u003c\/strong\u003e 0° \/ 180°\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eInput sensitivity:\u003c\/strong\u003e standard \/ high\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eGround lift:\u003c\/strong\u003e on \/ off\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAuto standby:\u003c\/strong\u003e on \/ off\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eBypass function:\u003c\/strong\u003e controlled using an optional footswitch\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAudio inputs:\u003c\/strong\u003e 2 × XLR, 2 × 1\/4-inch TRS, 2 × RCA\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAudio outputs:\u003c\/strong\u003e 2 × XLR, 2 × 1\/4-inch TRS, 2 × RCA\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFootswitch connection:\u003c\/strong\u003e 1\/4-inch\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eLFE input:\u003c\/strong\u003e none\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eIndicators:\u003c\/strong\u003e power and standby\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePower requirements:\u003c\/strong\u003e 100–240 V AC\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eEnclosure:\u003c\/strong\u003e reinforced 15 mm and 18 mm MDF\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFinish:\u003c\/strong\u003e black vinyl wrap with black-painted front baffle\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eIsolation:\u003c\/strong\u003e EVA isolation pad\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e 279 × 410 × 292 mm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 12 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePackage Contents\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eKRK S8.4 powered studio subwoofer.\u003c\/li\u003e\n\u003cli\u003ePower cable.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe bypass footswitch and protective woofer grille are not included and are available separately.\u003c\/p\u003e\n\u003ch3\u003eWho Is It For\u003c\/h3\u003e\n\u003cp\u003eThe KRK S8.4 is designed for music producers, recording and mixing engineers, mastering engineers, sound designers, and broadcast content creators who need more accurate monitoring of low-frequency information. Its compact enclosure is particularly suitable for workspaces where available room is limited.\u003c\/p\u003e\n\u003ch3\u003eCan’t find the KRK product you are looking for?\u003c\/h3\u003e\n\u003cp\u003eContact us: info@stageiq.lt or +370 636 55536.\u003c\/p\u003e","brand":"KRK","offers":[{"title":"Default Title","offer_id":56822624878978,"sku":"L0840014","price":272.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0931\/9736\/9730\/files\/imgi_46_2-KRK-S8-4_angle.jpg?v=1785852742"}],"url":"https:\/\/stageiq.lt\/en\/collections\/krk.oembed","provider":"STAGE IQ","version":"1.0","type":"link"}